For the scootahs among us ...
Hey back again after a while. Putting up my latest project, a ground up very fast 4T scooter build. I bought a crap chinese scooter from trademe for $54 dollars that wasnt working, but it had what i needed which was an un bent frame and a GY6 50cc engine case that wasnt wrecked. i started...
Ok, I have a TR50 street magic, it has ahad a few things done to it to help it's performance... 70cc kit. Burial Blaze exhaust, 21mm Carb etc. I live up a big hill (Brooklyn for wellingtonians) and I have found that it goes up at 50kph sweet when it is dead cold (the engine not the weather) but...
Gidday , anyone help me out here , Im in New Plymouth , desprit for some parts , have tried wreckers down here but no go ! Cheers :blink: Also were can I get polini parts from ?
http://www.yikebike.com/site/gallery/video/yikebike-discovery-channel Pity about the price
Hey there guys. New to the forum and after a bit of info. Can I replace the vacuum fuel pump with an electric one? Its on a chinese 150cc 4 stroke.
not being able to use a clutch at mo' is driving me crazy! :cry: :brick: has anyone got an old scoot they can lend me (poss not running?) in return for service, repairs, beer, almost anything ya need actually... (god loves a tryer)
VX or VXR frame required any got anything ? I would consider a cheap regesterd bike too...
Hi guys can someone shed some advice if possible. Just brought a '92 dio 50 for my step son. It has a new battery,it starts well all the indicators and horn brake light are strong and steady but the headlight and tail are very weak. There is a small increase in brightness when revving the...
Was looking at the Suzuki website last week and I see that they do not list the Burgman 400 anymore. Have heard a rumour that sales were low and might have been discontinued (in NZ anyway) Anyone heard anything about why they aren't being made available. They are a great scoot and were only...
Am fixing a solex 5000 moped and I believe the fuel pump or the carb is reason it won't run. Looking for one to borrow to see if I can get it too work Thanks
I just picked up a little 1982 Yamaha SA50 Passola off Tardme to hoon around on for next to nix:doobey:. It goes well and is registered, but the speedo doesn't work. I pulled it apart and found it has a stuffed cable. I have had a flick around Google and can't find anything in NZ for them. The...
Morning Chaps and Chapesses I have recently inherited a 1988 Honda Nifty 50 from my father in law, who got it from his brother-who probably got it from some bloke in a pub:D Its been kept under cover and is in reasonable nick for a 20 year old scoot. Now the bad news- it doesnt go! According...
has anyone managed to source Stage6 scooter parts or KOSO bits in NZ? I'm quite keen on a few of their offerings: electrics and carbs/jets etc. like http://www.scootercraft.com/product_info.php?info=p15572_Stage6-R-T-PWK-28mm-Racing-Carburetor.html If anyone can point me in the right...
i dont know if it's a national problem but i have noticed a number of scooter riders around christchurch using cycle lanes recently. am i just too much of a grumpy old bastard or is this really annoying? then again i suppose it at least means theyre out of the traffic and not slowing everybody...
chinese scooter manual wanted for gy6 in pdf plz:scooter::scooter:
Just found this: http://nzmoto.com/page1.php Its a Moto NZ50, I tried searching but couldn't find anything about them on the Forums, After a battle that resembled the last battle on Lord of the Rings I convinced my Parents to let me buy a "Scooter" So I am eyeing up one of these but just...
Hi, So I've got a 2007 Yamaha Jog. I've owned a previous jog, and have felt the current one lacks the acceleration and speed that the previous one had, but that is hard to prove. I did however remember the needle on the old one getting up to around 60kmh, where this one only gets to 55. I...
I have a Tr50 that won't start. I've replaced piston and rings (standard size) and done main gaskets etc. mechanic said it has low compression (90psi). Turns over fine but just won't fire. I've pulled the engine apart again, cleaned carb, cleaned reed block, new plug, fresh fuel. I have not...
So what is the trick to getting the back wheel off.Do you really have to pull the whole exaust off ?
One of the riders in our wee group swapped bikes with Balu and took the burger for a run. They were impressed and might even be seduced to the dark side. So, there we have it - another biker who has given the ole burger the benefit of the doubt and tried it, and liked it! Balu is working on...
these tires seem to be really difficult to find. These are the tires in order of my preference: All 110/70 - 16 (or 120/70 - 16 or 110/80-16 to fix speedo error) front and 140/70-16 rear: 1.) Metzeler Feelfree 2.) Michelin City Grip 3.) Michelin Gold Standard
Hi I'm about to start riding a scooter (adly silver fox) to university (auckland). Do you think this is suitable for a protective jacket? http://www.1tonne.co.nz/index.php?page=listingDetails&prodid=56&sco=&categoryid=2 Hoping to learn, so all thoughts appreciated Thx
Just scored the Mrs the 50 for 5 hundie , only got 500 k's on the clock :) we both happy campers, anyway whats the factory recommendations please for fuel octane ? (Guy at scooter shop that sells chinese scooters said to the Mrs to always run it on 91, I've always run my 2 strokers on 95 or 98. )
Hello. After my first experience buying scooters, I decided that all Chinese scooters are pieces of fucking crapshit. http://www.trademe.co.nz/Browse/Listing.aspx?id=269939760 I paid 200 bucks for it. Never again So the advice I need is: What are good makes to look for? What year/models, and...
well worth a look http://www.petrolmag.net/
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules