fairings, seats, tail units
:confused::confused:I want to buy 2 front cycle guard blanks for a JZR , Morgan look alike trike. Any one know of the whereabouts of where to purchase will be a hero.
the engine side of things has all gone surprisingly smoothly so far and I've decided that since it runs I'm going to get all the cosmetic stuff up to scratch while I do the engine, mainly so that I can alternate tasks as cleaning the engine becomes tedious very quickly and I don't really want to...
Anyone know of a reputable source for crash bungs, fairing and axle bungs if possible, for older bikes?? I've got a 1998 Kawasaki ZX6R that could do with the extra protection against hooligan drunks and the like.
What are the general steps to painting fiberglass parts like a race cowling? Did a google search but on some sites it says not to use alcohol solvents to clean it, some say to do it, some say to use only a slightly rough paper on the first few layers of paint so the paint can grip, some say to get...
Can anyone recommend a good powdercoater in Auckland? The frame under the seat of my vtr is rusting and wouldnt mind getting it stripped/rustproofed and then powercoated gloss black not much of a job and theres not much to the seat frame apart from unplugging the taillight and battery holder bits....
Hi I found a short in my wiring is caused by a broken head light bracket. I'm looking for a new set. There are a lot of these running around on tracks so I thought someone might have one to sell?
Hi All I have just bought a gsx400x/xs, it does need a good clean, but other than that the only thing that needs doing is the tank needs painting. But there are currently no graphics on the tank as it has beed sprayed by a non professional. I have been searching for a good photo of the...
hi does anyone know where i can get a late model (2005 onward ??) rs 125/250 gp style tail fairing from in new zealand? theres a version on trrade me but its not quite the style i want ive seen various bikes fitted with them ,but finding a supplier is proving difficult thanks in advance...
Where can i get fairings for a NC30? I've only come across justfairings.co.nz but was hoping there was something else out there. Also the ability to order just a section alone such as a tail would be good. ...
as my name here implies leather really isnt an option for me so when i buy a bike i will be wanting to get a vinyl or other synthetic cover for the seat. the question is are there any decent ones out there? finances will be my main guide in buying my first bike and a gn250 is looking to be my best...
Hi, I am after a seat for my 99 CBR900RR that i can change so i can take a passenger with out her falling onto the same seat as me. Why do they make these dam seats so huge, we can both fit on the front one its just not that comfy. So id like a spare front seat that i can mod so there is a...
I have a new pad now so if anyone needs some work done give me a buzz
Did a quick search, nothing immediate popped out at me, so apologies if this has been asked before. I did a custom fender eliminator on my GT250R and am wondering what is required to get a warrant. I currently don't have a reflector or number plate light. Are they compulsary? I'm thinking...
As in the pic my plate hanger has snapped, this was caused as the second bolt hole on the larger piece was not fastened in..... and NZ's rather bumpy roads (probably not helped but jumping the subsidence on Esmonde road!) I was thinking that a bit of ali bent to shape and resting over the...
Hi, does anyone know the place or person i can get my fairing fixed at? got couple of small cracks which need to be welded and fairing needs to be repainted. i am money limited so looking for good price for good quality. cheers
These days I seem to be accumulating quite a lot of broken, cracked and generally munted plastic bits . No, I've not broken them myself, I've gotten them like that. Now, in the good old days, when all bike parts were made of decent honest cast iron, fixing broken bits was easy. You welded, or...
anyone able to help with finding a front mudgaurd?cheers brad
Just want to get a rough figure on how much it costs to get a front fairing painted only. I wanna buy a TYGA front fairing and just want it painted in a basic jet black to go with the rest of the bike. Also where would you get this done?
woundering if i should get a pair for the vtr they are on trademe at moment. anyone had these before and what you think about them.:whistle: i would add a attachment to the trademe page but i dont know how to do it.
Hi all, We have just posted a thread here http://www.kiwibiker.co.nz/forums/showthread.php/118151-Tank-Paint-Protection-Film-Kits-49-00-while-stocks-last!!!!-Including-Freight!!!! We are running a special on our Paint Protection Film Kits while stocks last. Cheers Powersport.co.nz
I've got a front fender to get repaired - it's from a Suzuki VL1500 and It looks to be made out of steel. Can anyone suggest a panel beater that they've used before or perhaps a bike specific one?
Hi all :) Just picked up my new KLE 500... a sweet bike EXCEPT for the seat :( I know the rider seat guys in Tauranga will do a good job BUT they aren't exactly cheap. Does anyone know of an upholsterer in AKL that, if not specialising in bike seats has got reasonable experience with...
A friend who has a 89 Sportster 1200 is looking to restore the black powder coating that is currently slowly but surely flaking off in and around the engine cooling fins etc. Is complete disassembly the only option? Or are there other ways. Where do people generally start when looking to...
Got to thinking whilst on holiday (the beach air has that effect on my) about changing the colour of my CB. :cool: I want it to be Black, not just any black, but black pearl or something to camp it up nicely in the good ole Honda fashion. :rolleyes: I want all the blue to be the new chosen...
hey guys. I am wondering roughly what one can expect to pay for a one colour paint job on a fully faired bike, so tank, side and front fairing. (91 cbr) just after a ballpark figure if i went to a professional. Not after fancy metallicy paint, just a nice red. ZConversely, what could I expect to...
There are currently 2 users browsing this forum. (0 members & 2 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules