Team GPR

[richban]

should be fun if i don't run out of money lol , regans v4 is 25kgs lighter than mine..me going more road going(bigger) v gp so yer 90 or a tad less i hope

What carbs you using? Those YZ250 carbs on mine work so well. And cheap as chips on ebay.

[mr bucketracer]

What carbs you using? Those YZ250 carbs on mine work so well. And cheap as chips on ebay.

i think there are 2 rs125 carbs here , but yes second ,i would go your way as you have done a good job at setting them up, i have 2 40mm fcr carbs? To, maybe worth a try

[Sketchy_Racer]

If you're stuck for manifolds, i'd forgotten that I have files for CNC ones of them too, I'll flick em through at some point so you guys have em if you need em.

What forks you gonna run on that scotty? RS125?

[jasonu]

thanks been weighing up the 300 , up to 78kgs thats with out,
coils ,servo motor,fairing, wiring and cdi box, triple clamps and bars , levers and twise grip and cables, tank ,like to be no more that 85kg so time will tell

Most buckets weigh more and the owners should be ashamed!

[mr bucketracer]

If you're stuck for manifolds, i'd forgotten that I have files for CNC ones of them too, I'll flick em through at some point so you guys have em if you need em.

What forks you gonna run on that scotty? RS125?

cool dose it tilt them up? I have some radal rs125 ones here , may ask my brother nicy if he can make a depper top clamp to get just a little more hight out the bike

[mr bucketracer]

Most buckets riders weigh more and they should be ashamed!

what you trying to say (-; lol

[seymour14]

If you're stuck for manifolds, i'd forgotten that I have files for CNC ones of them too, I'll flick em through at some point so you guys have em if you need em.

What forks you gonna run on that scotty? RS125?

Those manifolds look tricky, will have to bring my A game to bear on those. Am taking off my regular blind fold and one hand tied behind my back...

Checklist: Aluminium-Check, CNC-Check, Dozen Piss-Checkarooney...

[jasonu]

what you trying to say (-; lol

There are a few fat cunts out there...

[Pumba]

There are a few fat cunts out there...

I resemble that remark

[Bert]

I resemble that remark

Your not the only one.... As the better half reminds me: round is a shape but not in shape....

Maybe we need to introduce a large trophy class.

Those manifolds look tricky, will have to bring my A game to bear on those. Am taking off my regular blind fold and one hand tied behind my back...

Checklist: Aluminium-Check, CNC-Check, Dozen Piss-Checkarooney...

Aluminium-check, dozen-piss-check ----> how about a stack of rear sets for summer spares?? You can put your blindfold back on (and your gimp suit)

[mr bucketracer]

Your not the only one.... As the better half reminds me: round is a shape but not in shape....

Maybe we need to introduce a large trophy class.



Aluminium-check, dozen-piss-check ----> how about a stack of rear sets for summer spares?? You can put your blindfold back on (and your gimp suit)

40 and over 200kg bike rider class , dose that work young fella

[seymour14]

Your not the only one.... As the better half reminds me: round is a shape but not in shape....

Maybe we need to introduce a large trophy class.



Aluminium-check, dozen-piss-check ----> how about a stack of rear sets for summer spares?? You can put your blindfold back on (and your gimp suit)

Yeah, those rear sets have been made, but I think they need remaking right, oops. A case of wearing a blindfold, hand behind the back, watching free porn, drinking ethanol and listening to Marilyn Manson, not a good combination.

Should have read the Koran instead...

On to it bro, shit loads of rear sets, couple of NSR300 Manifolds, One special Triple clamp and a partridge in a pear tree...

[mr bucketracer]

Yeah, those rear sets have been made, but I think they need remaking right, oops. A case of wearing a blindfold, hand behind the back, watching free porn, drinking ethanol and listening to Marilyn Manson, not a good combination.

Should have read the Koran instead...

On to it bro, shit loads of rear sets, couple of NSR300 Manifolds, One special Triple clamp and a partridge in a pear tree...

couple of hours work then , will just hot ya 100 honda up then just to add https://www.youtube.com/watch?v=P1ULjJ3EqyY

[seymour14]

couple of hours work then , will just hot ya 100 honda up then just to add https://www.youtube.com/watch?v=P1ULjJ3EqyY

Yeah, Fuck Deloreans, knew they were evil...

Speaking of my F5 bike, its an XR100. I can call it an XL100 if it makes people happier. Have read some posts that say it's no problem, ability to be upgraded to commuter bike status was available in the day. How's everyone feel about this, I am sure you have seen worse, and it's another F5 bike being ridden by average Joe blow. Rip me apart...

[husaberg]

Yeah, Fuck Deloreans, knew they were evil...

Speaking of my F5 bike, its an XR100. I can call it an XL100 if it makes people happier. Have read some posts that say it's no problem, ability to be upgraded to commuter bike status was available in the day. How's everyone feel about this, I am sure you have seen worse, and it's another F5 bike being ridden by average Joe blow. Rip me apart...

It wasn't a competition bike so I see no issues
When you take it to bits try a MB5 6 speed gearbox it should slip right in.