Results 1 to 6 of 6

Thread: Mukini jets or jet drills

  1. #1
    Join Date
    1st February 2004 - 18:17
    Bike
    RC36, WR, RS250, GSXR1000, Duke250, IZH
    Location
    Hamilton
    Posts
    632

    Mukini jets or jet drills

    I need to get some 300-380 size main jets for the ol' RGV. I have a whole lot of 260's that I can get drilled, just been informed that they are around $12 each new, and i don't have the coin to buy 8!

    Edit: yay for 500 posts!

  2. #2
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,502
    Blog Entries
    2
    Drilling jets is a bit hazardous as they can end up flowing differently & you don’t really have any way of testing them. + you have to mark them carefully. On an RGV which gets a bit prone to seizing if you get too close to the wire is it worth frying a piston by going up a jet size to be safe & finding it doesn’t flow anymore?
    Don't you look at my accountant.
    He's the only one I've got.

  3. #3
    Join Date
    31st May 2003 - 12:00
    Bike
    KTM Duke. Last ridden.....?
    Location
    Auckland
    Posts
    660
    Why do you need 8? Last I looked in mine, there was only one main jet each...
    I'm guessing you are running premix, no airbox?
    Unless you are runing very close to the wire, perhaps go 300, 320, 340, 360, 380, instead od 300, 310, 320, 330 etc.....
    You will use different jest for each side anyway, and if you go one over, just make a note for next time.
    My 2c anyway
    At the rise of the hand by Policeman, stop rapidly. Do not pass him by or otherwise disrespect him.

  4. #4
    Join Date
    1st February 2004 - 18:17
    Bike
    RC36, WR, RS250, GSXR1000, Duke250, IZH
    Location
    Hamilton
    Posts
    632
    kit pipes and premix are the only mods to the engine, I need 8 because you can't drill down jets and I'm gonna start at 400~ and work my way down on a dyno, also wouldn't mind getting 2X #30 pilot jets.. So close to racing, yet so far

  5. #5
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,502
    Blog Entries
    2
    Cheer up, what about the powerjets & air jets?
    Don't you look at my accountant.
    He's the only one I've got.

  6. #6
    Join Date
    1st February 2004 - 18:17
    Bike
    RC36, WR, RS250, GSXR1000, Duke250, IZH
    Location
    Hamilton
    Posts
    632
    I got a decent selection as the various carbs I've got (10) have been from different models, but they all seem to have 250-280 mains and #27.5 pilot. Except for the 450,460 combo I'm running at the moment.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •