Check the manifold for an air leak?
Does the throttle cable sit on top of the carb? Is the cable sheath sitting on top of the cable seat lip instead of being seated fully in?
If a man is alone in the woods and there isn't a woke Hollywood around to call him racist, is he still white?
Looking at the pic properly, it looks like the idle is on the throttle linkage and not the slide. Looks like your slide is stuck up in the pics. Has the slide got a wee grove in one side?
For a man is a slave to whatever has mastered him. Keep an open mind, just dont let your brains fall out.
Throttle cable routing may need checking.
Does it snap back to full close smoothly, or does it drag?....check cables and the twist grip
When Life thows me a curve
...I lean into it!
yes you can put the slide in backwards but it will then not drop down to the bottom of the slide, this seems to be what is happening in photo one as all I can see is the carb needle not the slide which is what I would expect to see. This will lock the slide in full open position. Where you holding the throttle fully open when you took this photo? If you where not holding the throttle open check the slide is in the right way round so that goes all the way to the bottom of the slide, or check that the throttle cable or throttle tube is not holding it open.
Cheers for the help guys. I wasnt quite seating the slide in properly...😶 just a novice move.
Sent from my iPhone using Tapatalk
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks