Results 1 to 4 of 4

Thread: minimoto tyre psi?

  1. #1
    Join Date
    17th April 2006 - 10:14
    Bike
    '01 VTR SP1, '92 NSR300, rm125,
    Location
    shitsville
    Posts
    353

    minimoto tyre psi?

    just scored a 310 dollar chinker from trademe, ripped the airbox off, and
    ran it in , now running on full racegas/oil mix and goes very very well, had one before didnt go this well,,

    anyway notice that the rear tyre shape was very weird, the sides of the tyre were flat , almost lookling like a top-hat, side on, and when i leaned it, gave a very unstable feeling, front tyre is perfectly curved, so i got a front tyre which im guna fit to the rear, cause all the rear tyres he had where weird shaped, anyway....

    wat are max psi* and good psi* to run,

    thanks,
    zzzzzZZZ

  2. #2
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Ah yes - good ol' box section tyres. Apparently thats all you can get in india.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  3. #3
    Join Date
    29th April 2006 - 21:20
    Bike
    FZR250/CB100Bucket
    Location
    Westie
    Posts
    189
    It depends on where you are riding or racing the bike. Probably 25 PSI is enough, for both front and rear. You may need to increase a couple of pounds if your an adult.
    The best advice I was given, was put a front tyre on the rear. Works way better, doesnt wear out so fast.
    The chinkers need constant maintenance, so check your tyre preesure every time you ride it.
    Also check your chain is tight, oil it everytime you ride it.
    Check all the nuts and bolts as they come loose often.
    Granma

    Motorbike racing...thrills, spills and heaps of fun.

  4. #4
    Join Date
    17th April 2006 - 10:14
    Bike
    '01 VTR SP1, '92 NSR300, rm125,
    Location
    shitsville
    Posts
    353
    cheers m8., much apreciated.
    zzzzzZZZ

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •