ZXR750 clutch problems

[FROSTY:Me]

I need specific advise about my clutch assembly.-clutch dont work
The zxr750 has hydraulics pushing the slave cylinder. The hydraulics are working fine
Ive taken the clutch to bits -seperated all the plates and nothing was amiss there.
between the slave and the clutch is a pushroad. this is where I thingk the problem lies.
On my zxr -Which has been apart - There is just the rod between the slave and the clutch.
I think theres soposed to be a ball bearing or maybee a cap of some sort on the end of the rod.
Please -somebody--this is driving me NUTS

[vifferman]

So "the hydraulics are working fine" means you've bled the hell out of the clutch? I know that on the VFR and VTR if you took the cover with the slave cylinder off, you needed to be very careful putting it back on, to get the rod located properly, and MUCHO bleeding was necessary afterwards, or the clutch just didn't work at all.

Can you get hold of a parts diagram to see what's supposed to be at the end of the throw rod? If there is supposed to be a cap or summat, where's it gone? Is it hiding in the slave cylinder somnewhere (i.e., off to one side)?

[erik]

Yours is the H1 (1989) model, right?
Does this help? (see attached image)
Got from here

[Omega1]

http://www.redmonkey.com/7r/index.ph...=.%2Fstart.php

Try the above website its called the ZX7R owners club it caters for all models, theres some great info and just login as a guest to post a message,helped me heaps with my 7.
Cheers O1

[FROSTY:Me]

Yours is the H1 (1989) model, right?
Does this help? (see attached image)
Got from here

You are a frigging magic man--That lil cap on the end is missing on mine
No wonder it dont go propper loik.

[riffer]

You are a frigging magic man--That lil cap on the end is missing on mine
No wonder it dont go propper loik.

Crikey Frosty. It's always the little bloody things that stuff ya up isn't it?

You must have learnt motorcycle mechanics in the same place as me....