secondedOriginally Posted by Stevo
secondedOriginally Posted by Stevo
I had to re-read that post a few times before I could make sence of it.
I am missing a few little pieces of the fairing, from my last collision with the ground, so I will cover up the gaps and reinforce the cracks with fibreglass.
What type of materials are you guys using with your soldering iron? All using cable ties?
I thought cable ties are nylon? not ldpe?
Also are you guys melting the plastic and reinforcing the back, then filling the front with some kind of filler?
Some of the posts are quite confusing and sounds like you're filling the front, sanding it and painting it
Cheers
Hey dude i have the Real thing if ya wana borrow it???????? PM me and i'll give ya my address ya can pop over and grab it........i dont think i have any plastic welding rod left but its cheap as chips from Patersons.Originally Posted by カワサキキド
Perfect timing, I'm just waiting for a front mount to arrive, the I can fix it up properly. Hopefully it will arrive tomorrow.
I've found by using the right plastic rod (surprise surprise) I get realy good welds with a soldering Iron. Have got a woodburning pen set to use for the next job (has different tips).
New Zealand......
The Best Place in the World to live if ya Broke
"Whole life balance, Daniel-San" ("Karate Kid")
Kia kaha, kia toa, kia manawanui ( Be strong, be brave, be steadfast and sure)
DON'T RIDE LIKE YA STOLE IT, RIDE TO SURVIVE.
Hi all,
Just wanted to provide some good information about "plastic welders" for anyone who has an interest.
Firstly, when we talk about "welding" of plastics - it is possible to effect true molecular welding - but you will never achieve this with a soldering iron. You need to have equipment that is specifically designed to meet worldwide welding standards. Using the following tools, you can achieve extremely strong WELDING of plastics.
Hand-held plastic welders:
The hand-held plastic welding tools provide a precisely controlled jet of Hot Air, which can be set to a specific temperature for welding all thermoplastics. These are by far the most commonly used tools for plastics fabrication and repair welding today.
So what do you need to consider before buying a Plastic Welder ?
Here is a list of things to take on board prior to purchasing your first plastic welder.
1. Quality -
DVS compliant ?
Equipment should be selected that complies with worldwide welding standards, as set by the German/Swiss welding/joining society (DVS). This means the welding equipment is manufactured to meet ideal parameters as required to ensure strong, structual, molecular welding.
CE compliant ?
In general equipment manufactured in Europe (Switzerland / Germany) will carry the CE mark. CE marking is a key indicator that a product complies with EU (European Union) legislation. CE marked products conform to very high standards of manufacture, safety, performance and quality - CE marked products are bought by professional users as they are the most suitable for industrial & commercial use. (Beware of cheap chinese equipment !! In China the CE symbol has been alleged to stand for China Export or China Engineering - because some Chinese manufacturers apply a very similar marking to their products. As Chinese exporters have used the CE logo incorrectly, the matter was raised at the EU parliament in 2008, and the Commission decided they will look into trade-marking the official CE logo - and are in discussion with Chinese authorities to ensure compliance with European standards. So in simple terms - if you pay peanuts, you'll get monkeys)
2. Back up & Support -
Make sure the supplier offers back up and support. Applications advice, spare parts & technical service is usually offered by the quality equipment suppliers. A good supplier will carry a full range of equipment, accessories and even consumables - eg. Plastic Welding Rods. These suppliers have generally been in the business for many years and so will have the knowledge & experience to best support you.
3. Warranty -
High quality welding tools are usually covered with a warranty. In Australia & New Zealand, Techspan brand plastic welders are supplied with a limited 2 year warranty.
4. Temperature Control -
A critical part of the plastic welding process is ensuring your welding temperature matches the welding temperature of the particular material to be welded. As different plastics weld at different temperatures, a welding tool with precise electronic temperature control is essential. In general temperature control is built-in to the welding tools. Some models even offer LCD displays, where you can set welding tempertures accurately on the screen. These models are commonly referred to as 'Digital' models.
5. Built-in Blower -
The most common plastic welding tool is fully self contained (Techspan model Rion) - meaning that the blower is built-in to the welder. These tools are by far the most portable and easy to use. Some models dont have built in blowers - compressed air can be used to provide the required airsource to such models, however use of compressed air can be very expensive and must be 'clean & dry'. Pressure must also be be controlled to suit the welding tool airflow specifications. Compressed air flow characteristics are also not as ideal as the fully self contained models with built-in blowers.
6. Accessories & Nozzles for Plastic Welding -
The welding tool will require some specfic accessory nozzles in order to effect correct welding techniques. To ensure you have all the right nozzles for your welding application, we recommend you buy your plastic welding tool in KIT form.
Techspan have put a great deal of emphasis on providing 'easy to find' equipment specification, training videos and more online. The latest Techspan website is packed with all the information you'll need.
Online Store: Now you can View, order & purchase our vast range of Plastic Welding Tools online 24/7.
Visit www.plasticweldingtools.co.nz
Youtube channel:
Visit www.youtube.com/user/TECHSPANONLINE
Facebook page:
Visit www.facebook.com/Techspan
MORE DETAILED INFORMATION ABOUT ' HOW TO ' WELD PLASTIC:
The above is only one of our recent 'tech tips'. To view the whole series of 'tech tips' on welding plastics, go to the following link >>
http://www.techspanonline.com/Articl...h-hot-air.aspx
Also, here is our full Instructional Plastic Welding Video >>
http://www.youtube.com/watch?v=HvV9a...layer_embedded
I am also happy to take any direct queries covering the plastic welding process, should you care to email me..
Regards,
Tim the tool man
www.plasticweldingtools.co.nz
The Leister Ghibli with a speed welding tip is awesome, thats what I use. But I sure am glad work payed for it.
Way to dig up a 7 year old thread guys..
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks