Page 1062 of 2625 FirstFirst ... 62562962101210521060106110621063106410721112116215622062 ... LastLast
Results 15,916 to 15,930 of 39365

Thread: ESE's works engine tuner

  1. #15916
    Join Date
    3rd January 2012 - 01:25
    Bike
    -
    Location
    -
    Posts
    284
    Seems like there is no inner radius on the transfers of Luc's cylinder.

  2. #15917
    Join Date
    30th April 2011 - 04:57
    Bike
    bsa. honda. aprilia
    Location
    england
    Posts
    390
    can you imagine how precise the transfer port flow/direction/speed would need to be to produce optimum cylinder filing and also the exhaust characteristics to achieve such an engine. bad enough with what we have now, maybe have to rewrite most of the 2t tuning as we know it today!

  3. #15918
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    But think of the revs.

    So what we need is for Frits to quickly sell the completed design to KTM who then for some unfathomable reason decides to put it into production as a 100cc road bike with their supposed 'ready to race' philosophy.And sell thousands of them, particularly in the Southern hemisphere.

    Then I need to wait a few years so I can afford one. All this needs to happen before I'm too old to race competitively. . . . Which was probably a few years ago anyway. I'm a slow learner, I think I got to my peak when I was 40. It doesn't seem like that long ago.
    Don't you look at my accountant.
    He's the only one I've got.

  4. #15919
    Join Date
    27th October 2013 - 08:53
    Bike
    variety
    Location
    usa
    Posts
    942
    hey guys since just recently i started working with the small cylinders i figure its good to upgrade to smaller tools also. today i recieved a smaller 90 handpiece and it looks perfect for the job . my full collection is getting bigger
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20141218_173319.jpeg 
Views:	147 
Size:	297.0 KB 
ID:	306764   Click image for larger version. 

Name:	20141218_183413.jpg 
Views:	159 
Size:	371.0 KB 
ID:	306765  

  5. #15920
    Join Date
    29th March 2013 - 14:57
    Bike
    Honda NS-1 / Gas Gas EC-125
    Location
    Portugal
    Posts
    116
    Interesting angle head, is that an eBay cheapie or is it for the cc specialty tool guys?

  6. #15921
    Join Date
    27th October 2013 - 08:53
    Bike
    variety
    Location
    usa
    Posts
    942
    i dont bother with cheap crap from china . i got it from ccspecialty because they had the best price i could find but you can get it from other places aswell. i dont believe cc makes any of the tools but rather just distributes them. its nakanishi head. not exactly sure who makes the shaft handle

  7. #15922
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Jealous, was looking at them just yesterday, but will have to wait. I get quite some chatter with my 3mm dentist setup with larger bits adapted & its isn't quick or precise as it could be. But the money isn't there atm.
    Don't you look at my accountant.
    He's the only one I've got.

  8. #15923
    Join Date
    27th October 2013 - 08:53
    Bike
    variety
    Location
    usa
    Posts
    942
    why not use a credit card then pay it back in 2 or 3 payments ? if i paid cash upfront for everything, i would have almost nothing

  9. #15924
    Join Date
    12th March 2010 - 16:56
    Bike
    TT500 F9 Kawasaki EFI
    Location
    Hamilton New Zealand
    Posts
    2,764
    Quote Originally Posted by F5 Dave View Post
    But think of the revs.

    So what we need is for Frits to quickly sell the completed design to KTM who then for some unfathomable reason decides to put it into production as a 100cc road bike with their supposed 'ready to race' philosophy.And sell thousands of them, particularly in the Southern hemisphere.

    Then I need to wait a few years so I can afford one. All this needs to happen before I'm too old to race competitively. . . . Which was probably a few years ago anyway. I'm a slow learner, I think I got to my peak when I was 40. It doesn't seem like that long ago.
    What bore size would you need 51mm bore , 51mm stroke? Whats max oversize for 100cc water cooled?

  10. #15925
    Join Date
    7th September 2009 - 09:47
    Bike
    Yo momma
    Location
    Podunk USA
    Posts
    4,562
    Quote Originally Posted by Martin1981 View Post
    Just thank you for that thread! most interesting thread i ever read! Just one question: can anybody tell me where this chocky fish is available? i googled and can not find it. we only have chocky bananas available here in germany.


    Husaberg has a cupboard full of them. He is always lurking around this forum so tracking him down will be easy.

  11. #15926
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by jasonu View Post
    Husaberg has a cupboard full of them. He is always lurking around this forum so tracking him down will be easy.
    husaberg, it should be noted is spelt with a small h as I don't like to show off...
    I haven forgotten I owe you a few still for running the Northern Hemisphere Sprocket forwarding operation.........
    So are Chock fish still just a NZ thing?

    Anyway anyone got some decent pic of the Konig flat 6 I guess it wasn't one disk valve like the Four? King Konig I think it was called
    Seattle Smithy?
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  12. #15927
    Join Date
    12th February 2004 - 10:29
    Bike
    bucket FZR/MB100
    Location
    Henderson, Waitakere
    Posts
    4,194
    Quote Originally Posted by Flettner View Post
    What bore size would you need 51mm bore , 51mm stroke? Whats max oversize for 100cc water cooled?
    If you were building one for Richban you'd start at 54x54

  13. #15928
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Erm 104cc if I was to stay legal. Oh right
    Don't you look at my accountant.
    He's the only one I've got.

  14. #15929
    Join Date
    12th March 2010 - 16:56
    Bike
    TT500 F9 Kawasaki EFI
    Location
    Hamilton New Zealand
    Posts
    2,764
    Quote Originally Posted by F5 Dave View Post
    Erm 104cc if I was to stay legal. Oh right
    Then perhaps 50mm bore and 51mm stroke.
    I've got this sleeve cylinder crank case underway again, should have the top and bottom patterns ready this weekend. and although it's to suit a YZ250 gearbox I was thinking about making an FOS cylinder ( after the sleeve idea turns to shit? ) to fit on this same case. 51mm stroke will fit no problem, case reed ( V force ) and transfers everywhere around the crank case.
    How does the FOS cylinder run under the power band ( off the pipes )? Could we do some tricks to help this part of the rev range?
    128 transfers, 195 exhaust? Somewhere to start?

  15. #15930
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by Flettner View Post
    Then perhaps 50mm bore and 51mm stroke.
    I've got this sleeve cylinder crank case underway again, should have the top and bottom patterns ready this weekend. and although it's to suit a YZ250 gearbox I was thinking about making an FOS cylinder ( after the sleeve idea turns to shit? ) to fit on this same case. 51mm stroke will fit no problem, case reed ( V force ) and transfers everywhere around the crank case.
    How does the FOS cylinder run under the power band ( off the pipes )? Could we do some tricks to help this part of the rev range?
    128 transfers, 195 exhaust? Somewhere to start?
    I am no physicist but I think the FOS will need to run constantly in its power band so require a cvt?

    Wouldn't we rather have a 500cc V4 Neil?..........
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

Thread Information

Users Browsing this Thread

There are currently 17 users browsing this thread. (0 members and 17 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •