Bucket bits wanted & services needed

[Drew]

Try 09 5308695 he may get rid of it. Is in auckland

Sweet!

Is this "he" you? Otherwise I'm gonna need a name to ask for.

[sidwyz]

He is not me, dads name is Gary he will be the one to answer the phone.

I know he's got one sitting there collecting dust , whether he wants to moleste that one I dont know.

[Gigglebutton]

Has anyone got an old 64mm piston for a FXR. I am going to weld & hack the top, so it doesn't matter if a valve is stuck in the top as long as the skirt is ok.
Cheers
Dazz

[husaberg]

Has anyone got an old 64mm piston for a FXR. I am going to weld & hack the top, so it doesn't matter if a valve is stuck in the top as long as the skirt is ok.
Cheers
Dazz

Ask Rich
http://www.kiwibiker.co.nz/forums/at...4&d=1328590637

[Gigglebutton]

Ask Rich
http://www.kiwibiker.co.nz/forums/at...4&d=1328590637

Ouch. That is proper fucked

[speedpro]

I taught Rich everything he knows about breaking pistons. Of course Rich hasn't used 64mm pistons for a long time now.

[F5 Dave]

Love your work Mike

[richban]

I taught Rich everything he knows about breaking pistons. Of course Rich hasn't used 64mm pistons for a long time now.

you are correct there Mike. Mine are 62

[Moooools]

Anyone got an FXR 150 oil cooler with hoses around? Actually just after the fittings to the engine but the whole lot would be ideal.

Or if someone has a sneaky solution for a non standard option that required little to no machining that would also work.

Cheers

[Moooools]

Anyone got an FXR 150 oil cooler with hoses around? Actually just after the fittings to the engine but the whole lot would be ideal.

Or if someone has a sneaky solution for a non standard option that required little to no machining that would also work.

Cheers

Sorted thanks

[husaberg]

Okay anyone got a Honda vt250 clutch and primary drive and tranny bits lurking around junking up their shed..........?
Have bits I don't need. not the couple of bits I do need.

[Imagineering]

I have a rather large Lathe, a CNC Mill and a workshop with which a lot of parts can be made here in Wellington.

Ask 'F5 Dave' about my ability to turn crap into things that work . . .

Murray.

[mr bucketracer]

Okay anyone got a Honda vt250 clutch and primary drive and tranny bits lurking around junking up their shed..........?
Have bits I don't need. not the couple of bits I do need.

prombly have but in the wrong place to look

[husaberg]

prombly have but in the wrong place to look

That's pretty ironic

[Muzzab]

Anyone out there have a rear shock to fit a VJ21 RGV250 hiding in the back of the shed?
Mines a bit poo and looking for a replacement for not to much $$.

Cheers
Muzza