Bucket bits wanted & services needed

**koba** · 20th May 2015, 15:19

Getting to make a lot of pipes lately...

**koba** · 24th May 2015, 15:19

I''m after a new carb for my second MB, It's got a 28mm carb currently but I'm yet to get it running right with it, I think it's a bit too big given the state of tune.

Anyone got a spare 24mm (or so) carb?
I'd prefer one that uses Mikuni hex main jets as I have quite the collection.

**F5 Dave** · 24th May 2015, 19:09

Think I still have the 25mm kiehin that needs a sleeve to make it legal. Yours for free if you can dance the dance of the seven veils.

**FJRider** · 24th May 2015, 19:15

Originally Posted by F5 Dave

Think I still have the 25mm kiehin that needs a sleeve to make it legal. Yours for free if you can dance the dance of the seven veils.

Tart ...

**koba** · 25th May 2015, 22:40

Originally Posted by F5 Dave

Think I still have the 25mm kiehin that needs a sleeve to make it legal. Yours for free if you can dance the dance of the seven veils.

I've got the first bit sussed, more practice required.

**Calvert86** · 8th June 2015, 00:29

Looking for a set of rims and slicks for fxr if anyone's got spares?

Calvert86

**Cheesy** · 15th June 2015, 09:49

Im looking at starting a little project and was wondering what sort of money I should expect to part with for an FXR 150 engine?

**F5 Dave** · 15th June 2015, 11:52

If your project isn't a bucket, try find any other type of engine. They are getting harder to find.

**Cheesy** · 15th June 2015, 13:51

Originally Posted by F5 Dave

If your project isn't a bucket, try find any other type of engine. They are getting harder to find.

I thought that might be the case, a GN125 would probably do as well but they seem to be way over priced for what they are on trademe. Its to go into whats left of an RM85 frame.

**Pumba** · 15th June 2015, 14:28

Originally Posted by Cheesy

I thought that might be the case, a GN125 would probably do as well but they seem to be way over priced for what they are on trademe. Its to go into whats left of an RM85 frame.

Probably the best bang for your buck http://newmanz.co.nz/shop/index.php?...&products_id=5 and takes the unknowns out of buying a second hand engine.

He also doe the lie flat 110cc & 125cc Honda clones as well.

**koba** · 15th June 2015, 19:03

Originally Posted by Cheesy

I thought that might be the case, a GN125 would probably do as well but they seem to be way over priced for what they are on trademe. Its to go into whats left of an RM85 frame.

Shoehorn something stupidly large into it.

**Cheesy** · 15th June 2015, 19:32

Originally Posted by koba

Shoehorn something stupidly large into it.

Its for the misses so that is probably not a good idea.... Electric start and under 200cc for size and preferably Suzuki just to make it difficult, a shame the TS/TF 125/185s arent electric start, could kept it 2 stroke then

**quallman1234** · 16th June 2015, 11:54

Originally Posted by Cheesy

Its for the misses so that is probably not a good idea.... Electric start and under 200cc for size and preferably Suzuki just to make it difficult, a shame the TS/TF 125/185s arent electric start, could kept it 2 stroke then

Just buy a brand new electric start Loncin 200cc or something along those lines.

Seriously though, i need a freaken carb for the club bike! Anyone in welly got one?

**mr bucketracer** · 29th June 2015, 20:49

Hi guys has anyone got a fxr engine gearbox fork selector , the single one by it self , cheers

**Gigglebutton** · 2nd July 2015, 16:32

Originally Posted by Cheesy

I thought that might be the case, a GN125 would probably do as well but they seem to be way over priced for what they are on trademe. Its to go into whats left of an RM85 frame.

We have a GN125 here with a bent frame if you still want one. Its my nephews. Make him an offer