Page 123 of 133 FirstFirst ... 2373113121122123124125 ... LastLast
Results 1,831 to 1,845 of 1985

Thread: Bucket bits wanted & services needed

  1. #1831
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    I have left hand tap so I buy male rose joints and use hex bar to make joiner rods. Aliexpress is your friend. . . if a bit slow.
    Don't you look at my accountant.
    He's the only one I've got.

  2. #1832
    Join Date
    25th February 2015 - 05:56
    Bike
    CBR250RR
    Location
    Mount Maunganui
    Posts
    101

    Brand new Carb for RG150

    Im looking for brand new carb for my RG150. Any you bucket guys who one that will work? I know there is heaps available for 4 strokes.

    Reason. I seized one motor because something in carb blocked up. Im spending $1000 on building my new motor with Genuine parts so don't want to put another shitty dirty carb on it. I herd 85cc MX bike carbs might be similar size 28mm?

  3. #1833
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by Aeromo View Post
    Im looking for brand new carb for my RG150. Any you bucket guys who one that will work? I know there is heaps available for 4 strokes.

    Reason. I seized one motor because something in carb blocked up. Im spending $1000 on building my new motor with Genuine parts so don't want to put another shitty dirty carb on it. I herd 85cc MX bike carbs might be similar size 28mm?
    There is a newish OKo and a few other carb on trademe at the moment.
    http://www.trademe.co.nz/Members/Lis...?member=333660

    I finally found a pic of the RGV150 carb the other day, Exactly as F5 Dave described it.
    RGV only offset debored
    Click image for larger version. 

Name:	rgv150 carb.jpg 
Views:	33 
Size:	427.2 KB 
ID:	321825Click image for larger version. 

Name:	Rgv150 carb 2.jpg 
Views:	36 
Size:	469.6 KB 
ID:	321826
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  4. #1834
    Join Date
    25th February 2015 - 05:56
    Bike
    CBR250RR
    Location
    Mount Maunganui
    Posts
    101
    Quote Originally Posted by husaberg View Post
    There is a newish OKo and a few other carb on trademe at the moment.
    http://www.trademe.co.nz/Members/Lis...?member=333660

    I finally found a pic of the RGV150 carb the other day, Exactly as F5 Dave described it.
    RGV only offset debored
    Click image for larger version. 

Name:	rgv150 carb.jpg 
Views:	33 
Size:	427.2 KB 
ID:	321825Click image for larger version. 

Name:	Rgv150 carb 2.jpg 
Views:	36 
Size:	469.6 KB 
ID:	321826
    Thanks for reply. Not sure if those carbs will work with 2 stroke?
    Yea dirty old carb you got there, that's condition of most of the ones around now,
    No matter how much I clean the carbs I have still not sure if they clean enough

  5. #1835
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by Aeromo View Post
    Thanks for reply. Not sure if those carbs will work with 2 stroke?
    They will.
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  6. #1836
    Join Date
    31st July 2005 - 11:15
    Bike
    a shed full of crazy shit
    Location
    Palmerston North
    Posts
    2,201
    Quote Originally Posted by Aeromo View Post
    Im looking for brand new carb for my RG150. Any you bucket guys who one that will work? I know there is heaps available for 4 strokes.

    Reason. I seized one motor because something in carb blocked up. Im spending $1000 on building my new motor with Genuine parts so don't want to put another shitty dirty carb on it. I herd 85cc MX bike carbs might be similar size 28mm?
    You really need to ask what is blocking the carb in the first place; in reality it will likely happen to a new carb as well.
    There are only really two possible sources:
    1) air, air filter, air box & correction jets. Clean up them up
    2) fuel, shit in the tank, shitty fuel lines, shit filter. Same as above.

    Someone in Auckland was offering carb (and other engine parts) cleaning service on trademe. It wasn't acid dipping but... Ultrasonic cleaner is worth a shot.

    If your hell bent on a new carb, get a PWK and be done with it. eBay. I wouldnt waste my time on an MX carb unless it was in a box new.

  7. #1837
    Join Date
    25th February 2015 - 05:56
    Bike
    CBR250RR
    Location
    Mount Maunganui
    Posts
    101
    Quote Originally Posted by Bert View Post
    You really need to ask what is blocking the carb in the first place; in reality it will likely happen to a new carb as well.
    There are only really two possible sources:
    1) air, air filter, air box & correction jets. Clean up them up
    2) fuel, shit in the tank, shitty fuel lines, shit filter. Same as above.

    Someone in Auckland was offering carb (and other engine parts) cleaning service on trademe. It wasn't acid dipping but... Ultrasonic cleaner is worth a shot.

    If your hell bent on a new carb, get a PWK and be done with it. eBay. I wouldnt waste my time on an MX carb unless it was in a box new.

    Few things I could sort
    correction jets
    shitty fuel lines
    shit in the tank

    I found this site so will get a PWK from here.
    http://www.pjmotorsports.com/carburetors.html

  8. #1838
    Join Date
    30th November 2005 - 18:27
    Bike
    TZFXR150, R1150GS, DRZ400, Ninja300 prod
    Location
    Christchurch
    Posts
    1,811
    Anyone got a standard FXR exhaust gathering dust?


    Its harder to lose weight than gain horsepower.

  9. #1839
    Join Date
    4th January 2009 - 21:08
    Bike
    YLR150RR and a RD350LC
    Location
    Not far from Ruapuna
    Posts
    2,368
    Quote Originally Posted by Bert View Post
    You really need to ask what is blocking the carb in the first place; in reality it will likely happen to a new carb as well.
    There are only really two possible sources:
    1) air, air filter, air box & correction jets. Clean up them up
    2) fuel, shit in the tank, shitty fuel lines, shit filter. Same as above.

    Someone in Auckland was offering carb (and other engine parts) cleaning service on trademe. It wasn't acid dipping but... Ultrasonic cleaner is worth a shot.

    If your hell bent on a new carb, get a PWK and be done with it. eBay. I wouldnt waste my time on an MX carb unless it was in a box new.
    If you want to race in development class , then keep it stock, fix the problem and put a fuel filter on , problem is most likley the petrol tank, so you would be wasting your money on another carb becauase the old one got dirty
    My neighbours diary says I have boundary issues

  10. #1840
    Join Date
    25th February 2015 - 05:56
    Bike
    CBR250RR
    Location
    Mount Maunganui
    Posts
    101
    Quote Originally Posted by Yow Ling View Post
    If you want to race in development class , then keep it stock, fix the problem and put a fuel filter on , problem is most likley the petrol tank, so you would be wasting your money on another carb becauase the old one got dirty
    I put new filter on and lines when I got the bike ready for track before the last of the Pacific club rounds.

    There is also in the rules.
    In instances of wear and tear damage or failure, parts may be replaced but must not derive a performance advantage.

    Fitting a new Mikuni 28mm, same size and make of carb the bike came out with like this one.
    http://www.mikunioz.com/product/tm28...tm-carburetor/

    Not a performance advantage in my opinion,

  11. #1841
    Join Date
    25th February 2015 - 05:56
    Bike
    CBR250RR
    Location
    Mount Maunganui
    Posts
    101
    Quote Originally Posted by Aeromo View Post
    I put new filter on and lines when I got the bike ready for track before the last of the Pacific club rounds.

    There is also in the rules.
    In instances of wear and tear damage or failure, parts may be replaced but must not derive a performance advantage.

    Fitting a new Mikuni 28mm, same carb the bike came out with like this one.
    http://www.mikunioz.com/product/tm28...tm-carburetor/

    Not a performance advantage in my opinion,

    But I do plan on winning all the development races at this coming Nats so I expect my bike will be checked haha JJ

  12. #1842
    Join Date
    4th January 2009 - 21:08
    Bike
    YLR150RR and a RD350LC
    Location
    Not far from Ruapuna
    Posts
    2,368
    Quote Originally Posted by Aeromo View Post
    But I do plan on winning all the development races at this coming Nats so I expect my bike will be checked haha JJ
    That is not the same carb as std, that is an RG250 carb
    My neighbours diary says I have boundary issues

  13. #1843
    Join Date
    25th June 2003 - 12:00
    Bike
    Hornet
    Location
    Waikato
    Posts
    64

    Unfinished project?

    Might regret this, but son apprentice mechanic looking for unfinished project, anybody want to clear something out? Research so far looks like it will take a while and much cash to gather together enough bits for a build from scratch.

    Steve

  14. #1844
    Join Date
    16th January 2012 - 20:39
    Bike
    fxr 150
    Location
    Hawera
    Posts
    44
    I may have something you could be interested in. Pm me.

  15. #1845
    Join Date
    26th November 2006 - 14:22
    Bike
    2022 Honda CB500X, CBR150RS F4 Bucket
    Location
    Rolleston
    Posts
    1,008

    415 front sprocket to suit FXR?

    Hi, can anybody point me in the direction of a 15T 415 front sprocket to suit a FXR? Been pouring over the JT catalogs with no joy
    Thanks.
    Sometimes you wish it was easier, but if it was, everyone else would do it, then you remember you don't want to be like everybody else!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •