www.FastBikeGear.co.nz
Top brand Motorcycle accessories: R&G Racing, Titax, CTEK, Ultrabatt lithium Batteries, RockSolid, BikeVis, NGR, Oberon, Stopit, TUTORO, Posi-Lock, etc.
Mobile: 0275 985 266 Office, 09 834 6655
For the past few years we have given our unofficial Ignitech manual away for free to literally hundreds of Ignitech's customers and received terrific and very satisfying feed back.
During this period we have constantly improved and expanded it to cover new features added to the units, tips, recommendations and explanations.
We have just added more diagrams to it and more detailed advice on which spark plug leads and coils have proven to give the best results (We have done a huge amount of on road testing and testing with an ignition scope to determine which combinations deliver the best performance).
A decision was made earlier this year to charge a small fee for the manual to cover this ongoing work, ($10).
I hope everyone understands this is not a get rich quick proposition but a way I can encourage myself to continue the service.
You can read some customer reviews on our manual here and in many of the forums.
The manual can be ordered from our web site here.
The manual will be emailed to you as a PDF.
Many thanks
Liam Venter
Liam@FastBikeGear.co.nz
FastBikeGear, Importers and Distributors of Motorcycle Accessories
www.FastBikeGear.co.nz
Top brand Motorcycle accessories: R&G Racing, Titax, CTEK, Ultrabatt lithium Batteries, RockSolid, BikeVis, NGR, Oberon, Stopit, TUTORO, Posi-Lock, etc.
Mobile: 0275 985 266 Office, 09 834 6655
Hello..
I got a problem.
Has enyone encountered bugs in ignitech?
I got this simple system for 1cyl twostroke.(canīt remember name)
My bug is:
When adjusting base advance.
I get this 'maximum' ignitionadvance value, letīs say i got maximun 58 degrees.
then when powering off unit without adding any adjusting at all and powering back on
I get a different value, say 60 degrees..
Whatīs going on?
Rgds
Patrick
Wob and Rob covered the base setting for the ignitech in the ESE thread.
http://www.kiwibiker.co.nz/forums/sh...#post113082223
http://www.kiwibiker.co.nz/forums/sh...post1130868272
http://www.kiwibiker.co.nz/forums/sh...post1130774042
http://www.kiwibiker.co.nz/forums/sh...post1130872290
http://www.kiwibiker.co.nz/forums/sh...post1130623769
http://www.kiwibiker.co.nz/forums/sh...post1130190144
http://www.kiwibiker.co.nz/forums/sh...post1130188437
http://www.kiwibiker.co.nz/forums/sh...post1130561965
http://www.kiwibiker.co.nz/forums/sh...post1130188354
Just like to amend this earlier advice. We now prefer to use resistive plugs rather than resistive caps. We have discovered that the resistors built into the resistive caps periodically fail and cause intermittent issues.
We have also extended our manual significantly for the TCIP4 units.
www.FastBikeGear.co.nz
Top brand Motorcycle accessories: R&G Racing, Titax, CTEK, Ultrabatt lithium Batteries, RockSolid, BikeVis, NGR, Oberon, Stopit, TUTORO, Posi-Lock, etc.
Mobile: 0275 985 266 Office, 09 834 6655
Fast bike, do you have any information on the Ignitech IJ 12 1CH unit? I have one but know nothing about it? I do use the normal ignitech's in some of my bikes so know a bit about them. Ignitech don't seem to be interested in responding.
Hi Fastgear!!!!! I am currently racing a classic sidecar outfit in england. I am running a 1972 based 980 BMW boxer engine. At the moment I am using a Boyer Bransden Digital ignition system (their pick up's and coils) a total loss battery system (single spark heads). I have been looking at the Ignatech Web site and slightly at a loss as to what system I would require, cost and what comes with it. Any recommendations please? Would it be useful to purchase one of your manuals to get a better idea. My other choice is likely to be an MSD system, but likely to cost around Ģ600.
Ta
"Fingers84"
Can you email me liam@fastbikegear.co.nz
www.FastBikeGear.co.nz
Top brand Motorcycle accessories: R&G Racing, Titax, CTEK, Ultrabatt lithium Batteries, RockSolid, BikeVis, NGR, Oberon, Stopit, TUTORO, Posi-Lock, etc.
Mobile: 0275 985 266 Office, 09 834 6655
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks