Activity Stream

oops, looked at it on my phone....

Another interesting pin with usual conical shape on the both sides, but with approx 1.5 mm steps at the ends. This pin from Yamaha 500 latest 2002...

https://www.youtube.com/watch?v=EWNkJUDctdk&feature=youtu.be

Wow, that is a nice job. I used the same method to make core boxes by 3D printing. And the cylinder looks like it could have a lot of power too. A...

You probably need to weld it inside a gaschamber as when you trap air inside it might be hard to seal up, as air want´s to escape due to it gains...

Sounds like springs to me (as a min) as the thing is sacking out. Check pages like Racetech.com that sell springs. They usually have a tool which...

Right, several things to note. I use a product called core fix, a sand glue, once fixed in place the cores do not move. Ingate shape is important,...

You ask for help then complain that you are getting help from too many people? You're more than welcome to take your collection of shit and fuck off.

Dude are you drunk?

It turned out to be something like this. unfortunately no magic dust when it was opened. But appears to be welded in gas, such as a chamber or laser...

More pics... Cylinder was dimensionally pretty exact. about 0,3mm misalignment. Exhaust duct was lower about 0,5mm but I made it smaller as I must...

Some more pics.. At third try I made attachments for transfer and exhaust core to central core for better stability. Over pour channel and risers...

This is a cylinder I designed and made moulds for sand cores with 3D printing two years ago. Moulds are painted with primer and filler and hand...

Right, got it.

This render another classic example of too many chefs would spoiler the kitchen. I can be disagreed that you always start from the scratch in any...

Found this in my Aprilia documentation and I wouldn't be surprised if this drawing originated on a Pankl drawing board. I'm glad you liked them...

Yamaha 3ma engine is equipped with balanceshaft and have the cylinders turned 180 degrees, also an alternative?

That reads to me like the money Trump was pumping into the stock market to keep the market artificially inflated. We knew that the Fed was paying...

In line aftermarket fuel filters are notorious for causing kinks that block off fuel supply. Looks like you're doing it yourself. Watch lots of...

Translation. He's locked himself out of the house and the bikes keys are inside Merciless he is!:angry2::motu::Oops:

2006? :whistle: Your problem is HISS. Unless the ECU is happy with all the components, it won't be working...

I feel so sorry for the next generation growing up in Scotland if the SNP make law their new hate crime Bill and gender recognition act-where...

they made 600's for decades, maybe the year would assist in advice being suitable?

From memory, and it was decades ago, the BMW manual used to advise that in the event of a problem first thing was to check and clean (or replace) the...

yeah go on, do it for Diesel Pig.... we will all do it for him, he needs to hear a good lough like how I get lost again and tear my gooch open on a...