PDA

View Full Version : Moto Guzzi brake discs



Supertwin Don
27th May 2009, 19:53
I am trying to source some replacement discs for my Guzzi California III - 2@300mm dia and one 270mm dia. They are cast iron floaters, and the mentality over here has become "if it wasn't made specifically for it it's not suitable"
Questions - anyone in NZ likely to carry stock discs?
anyone ever cut their own replacements? (and, if so,what material?
even the bobbins are £10 ($25) EACH !!!!

Paul in NZ
27th May 2009, 20:54
I am trying to source some replacement discs for my Guzzi California III - 2@300mm dia and one 270mm dia. They are cast iron floaters, and the mentality over here has become "if it wasn't made specifically for it it's not suitable"
Questions - anyone in NZ likely to carry stock discs?
anyone ever cut their own replacements? (and, if so,what material?
even the bobbins are £10 ($25) EACH !!!!

Had good luck with these guys

http://www.mgcycle.com/index.php?cPath=110&osCsid=115707506ae1212b890982a0e208c454

Or call Moto Kiwi here in NZ - Pete's a good bastard for sure - may even have a used one but sorry, disks cost lots....


http://www.motokiwi.co.nz/

Oh - good luck cutting your own, its not quite as easy as it sounds.....

Dodgyiti
28th May 2009, 19:16
disks cost lots....



About $800-$1100 NZD

Scary!

They are available right back to the 70's for big twins, it's the (prone to warping) small block owners that should be really nervous, they are unobtainium for some models.

I have never let a good set of discs slip through my hands, that and the crownwheel in the diff are possibly the two biggest shocks to face any long term Guzzi owner...

Supertwin Don
2nd July 2009, 22:08
Found a place that does replacement discs!!!

www.allbikeengineering.co.uk

set of three for about £220 ($550) - don't know what they would charge to ship out to NZ, though.

As they are not OEM, what do LTNZ etc. think of them?:bash:

bungbung
3rd July 2009, 10:49
LTNZ / wof inspectors will have no idea whether a disc is oem or not.
There are plenty of aftermarket discs for sale here, as long as they are the same dimensions I can't see an issue. They will still need to pass the braking test for a wof.

I have EBC discs on my bike btw.

imdying
3rd July 2009, 11:27
Found a place that does replacement discs!!!

www.allbikeengineering.co.uk

set of three for about £220 ($550) - don't know what they would charge to ship out to NZ, though.

As they are not OEM, what do LTNZ etc. think of them?:bash:

For a WOF, no trouble.

For compliancing and certification, only slightly more trouble.

For disc rotors all you will require is a photocopy of the catalogue page (from your supplier) that proves that the part number you have fitted to your vehicle is designed for that application. No biggy :)

For the disc pads you will require a document that states that the friction material is suitable for the application, and that the part number fitted is designed for that application (again a photocopy of the catalogue reference is sufficient).

The suitability of the friction material document isn't a biggy... just find who imports that brand locally and have them supply that document (it's just a form letter, you won't be the first to ask for one so they'll just pluck on from the shelf, fill in the blanks, and sign it).

If you can't get that from them (because they're idiots, lazy, whatever), then you can buy your pads from someone who deals with those matters on a regular basis, such as a member of the New Zealand Brake and Clutch Specialists Association. In reality all that they will do is buy a well known brand of pads like Vesrah from Darbis or similar, fill in their standard friction lining certification document they use, and send you on your way, easy peasy :) (that document will have some numbers on it to keep the compliance guy happy, plus it 'passes the buck' should they prove unsuitable).

Since the tightening of compliancing about 10 years ago, it's all standard practice, you should have no trouble with any of this.

Supertwin Don
3rd July 2009, 19:30
imdying - thanks very much for that - I should be able to source those documents easily, now that I know which ones I need:woohoo:

Will be fitting new pads to the new discs anyway, - what makes are generally available in NZ? ( that way I can make sure I have the right piece of paper!)

Supertwin Don
4th September 2009, 21:45
Have now just ordered new discs - £60 each plus post & Packing.
Read some good reports on UK Guzzi club site, so hopefully should be OK.
Bike should be arriving in NZ (Hamilton) mid-late January, so will be looking for ride-outs etc in Feb.
I should be arriving early December, so will probably try to find people before my bikes arrive.
Clubs / meeting places info appreciated.