slowpoke
2nd July 2009, 20:16
Ok, I dropped the ball on picking up my crashed R1 road/race bike at auction (lucky bugger whoever scored that) so I've got a swag of R1 road/race bits and bobs to flog, along with some other stuff:
Carbon fibre Roo Racing muffler, extremely light, and good horsepower. Was lightly rashed which I've mostly sanded/polished out. Looks fine from a few metres away but some marking is visible up close (see pic). Was a 54mm entry but I've squeezed it down to 52mm to suit the Akrapovic exhaust. Will fit many bikes, perfect for racer. Can probably throw in a Termignoni sticker for it to stir up the Ducatisti $150
Yoshi twin alloy oval mufflers. Well dinged bodies but ends are ok so good for re-skinning or maybe a race bike(s). I had a project in mind for these but it ain't gonna happen so out they go. $150 the pair
98-01 R1 triple clamps (top/bottom/stem) with 89-ish right way up GSXR1100 forks adapted via machined collars/bushes. Can throw in the early GSXR brake master cylinder to suit...if I can find it. 1 fork is disassembled, not by me, but I think it's all there. Great for that project/custom/race bike. $200
98-01 R1 Race fairings, including tank. As pictured, good nick but not perfect, great for saving that luvverly road gear on track days. Will throw in a spare new tinted screen if bought at asking price. $400
98-01 R1 Rims, fitted with EBC Pro-lite full floating, high iron content (higher coefficient of friction) discs and worn but still useable set of Metzeler race-tec's. Average paint due to tyre changes but straight with no dings. $450
00-01 R1 Alloy race fairing/instrument bracket, including instruments with blanked off speedo and wiring loom section. Heaps lighter than steel OEM jobby, and with the loom allows VERY quick change from road to race mode (allows you to drop off the whole top fairing, lights, instruments, mirrors etc as one unit). Bracket fits 98-99 too but instruments suit 00-01 R1 $150 for both
98-01 R1 various alloy rear 520 sprockets, 46-41 from memory, some well worn others almost new. Also stock OEM 530(?) front and rear steel sprockets and chain, basically only used to run bike in. $100 the lot.
98-01 R1 NEW Barnett alloy clutch friction plates. Lighter than stock steel plates to reduce rotating mass and improve engine response. Cost $140, yours for $100
98-01 R1 and probably other years, NEW in packet steering stem bearings, paid $67, yours for $50.
98-01 R1 NEW in packet rear EBC HH sintered brake pads, 2 sets, paid $70ea yours for $50ea. Will also fit an R7 if you just happen to have one lying about…..
00-01 R1 stock OEM exhaust, complete from headers to stock titanium muffler, only used to run in bike, may have slight marking from storage but other wise excellent condition. $100
98-01 R1 homemade rearsets, black and gold anodised, look OK but aren't super pretty, give better ground clearance and save your OEM gear. Have had a fair bit of use but still very functional, includes some spare parts. Will throw in a set of pillion pegs minus the R/H hanger $40
00-01 R1 EXUP servo motor, probably fit 98-99 too. $30
98-01 R1 fork/axle nylon crash knobs. One knob fits over axle nut, other fits inside axle, secured by light threaded rod and stainless nylock nuts. I've turned up a few of these and can't remember if I used stainless or galvanised 6mm threaded rod on this set. Used but good nick, great protection for the gravitationally challenged. Might fit arse 6 too? $25
I'm a way at work until the end of next week but am only home for a week and a half before heading off again so wanted to get the ball rolling before then. I can sort item photo's when I get home if anyones interested. I'm happy to send stuff but you can do the legwork regarding prices.
If someone wants most/all of the R1 stuff I'll do you a real sharp price.
Carbon fibre Roo Racing muffler, extremely light, and good horsepower. Was lightly rashed which I've mostly sanded/polished out. Looks fine from a few metres away but some marking is visible up close (see pic). Was a 54mm entry but I've squeezed it down to 52mm to suit the Akrapovic exhaust. Will fit many bikes, perfect for racer. Can probably throw in a Termignoni sticker for it to stir up the Ducatisti $150
Yoshi twin alloy oval mufflers. Well dinged bodies but ends are ok so good for re-skinning or maybe a race bike(s). I had a project in mind for these but it ain't gonna happen so out they go. $150 the pair
98-01 R1 triple clamps (top/bottom/stem) with 89-ish right way up GSXR1100 forks adapted via machined collars/bushes. Can throw in the early GSXR brake master cylinder to suit...if I can find it. 1 fork is disassembled, not by me, but I think it's all there. Great for that project/custom/race bike. $200
98-01 R1 Race fairings, including tank. As pictured, good nick but not perfect, great for saving that luvverly road gear on track days. Will throw in a spare new tinted screen if bought at asking price. $400
98-01 R1 Rims, fitted with EBC Pro-lite full floating, high iron content (higher coefficient of friction) discs and worn but still useable set of Metzeler race-tec's. Average paint due to tyre changes but straight with no dings. $450
00-01 R1 Alloy race fairing/instrument bracket, including instruments with blanked off speedo and wiring loom section. Heaps lighter than steel OEM jobby, and with the loom allows VERY quick change from road to race mode (allows you to drop off the whole top fairing, lights, instruments, mirrors etc as one unit). Bracket fits 98-99 too but instruments suit 00-01 R1 $150 for both
98-01 R1 various alloy rear 520 sprockets, 46-41 from memory, some well worn others almost new. Also stock OEM 530(?) front and rear steel sprockets and chain, basically only used to run bike in. $100 the lot.
98-01 R1 NEW Barnett alloy clutch friction plates. Lighter than stock steel plates to reduce rotating mass and improve engine response. Cost $140, yours for $100
98-01 R1 and probably other years, NEW in packet steering stem bearings, paid $67, yours for $50.
98-01 R1 NEW in packet rear EBC HH sintered brake pads, 2 sets, paid $70ea yours for $50ea. Will also fit an R7 if you just happen to have one lying about…..
00-01 R1 stock OEM exhaust, complete from headers to stock titanium muffler, only used to run in bike, may have slight marking from storage but other wise excellent condition. $100
98-01 R1 homemade rearsets, black and gold anodised, look OK but aren't super pretty, give better ground clearance and save your OEM gear. Have had a fair bit of use but still very functional, includes some spare parts. Will throw in a set of pillion pegs minus the R/H hanger $40
00-01 R1 EXUP servo motor, probably fit 98-99 too. $30
98-01 R1 fork/axle nylon crash knobs. One knob fits over axle nut, other fits inside axle, secured by light threaded rod and stainless nylock nuts. I've turned up a few of these and can't remember if I used stainless or galvanised 6mm threaded rod on this set. Used but good nick, great protection for the gravitationally challenged. Might fit arse 6 too? $25
I'm a way at work until the end of next week but am only home for a week and a half before heading off again so wanted to get the ball rolling before then. I can sort item photo's when I get home if anyones interested. I'm happy to send stuff but you can do the legwork regarding prices.
If someone wants most/all of the R1 stuff I'll do you a real sharp price.