Issues with dash lights

[nico]

hi all having a lil gremlin anoying me seems strange but when i tun the key al l the light's come on do a cycle then cut out usually / start then only nutrel stand light sooooooooooooooooo. this is what happening now turn key all lights come on do a cycle go out but the two indacator lights and high beem light are staying on and all other lights and staing off ie, the back light for speedo tako and other gauges very annoying stays on well every thing seems to be working just not lighting up. does this ring any bells any one ???? sujestions any one? this was only hapening once bike was run and switched back on but seems to be doing it every start up now.....



need so brains to shead some light .:headbang:

[jellywrestler]

what sort of bike would help...

[Max Preload]

what sort of bike would help...

I'm thinking perhaps a 1994 Honda VFR750... maybe I should be a psychic on 'Sensing Gobshite'... :whistle:

Now, if I could just make sense of the garbled post... :blink:

[nico]

I'm thinking perhaps a 1994 Honda VFR750... maybe I should be a psychic on 'Sensing Gobshite'... :whistle:

Now, if I could just make sense of the garbled post... :blink:


nope you aint a pshchic you can just read a profile, if you were a so called pshchic you'd actually help instead of leaving stupid negative posts like a lil gurl,


and it's a 94 vfr 750 (rc36) to tose who might actually be able to help.

[Max Preload]

nope you aint a pshchic you can just read a profile, if you were a so called pshchic you'd actually help instead of leaving stupid negative posts like a lil gurl,


and it's a 94 vfr 750 (rc36) to tose who might actually be able to help.

Well, I could have helped since I happen to have the wiring diagram, but I won't since you appear to be just another angry, retarded cocknocker. Come back when you learn English, fucktard. :finger:

[UberRhys]

hi all having a lil gremlin anoying me seems strange but when i tun the key al l the light's come on do a cycle then cut out usually / start then only nutrel stand light sooooooooooooooooo. this is what happening now turn key all lights come on do a cycle go out but the two indacator lights and high beem light are staying on and all other lights and staing off ie, the back light for speedo tako and other gauges very annoying stays on well every thing seems to be working just not lighting up. does this ring any bells any one ???? sujestions any one? this was only hapening once bike was run and switched back on but seems to be doing it every start up now.....



need so brains to shead some light .:headbang:

Heard of punctuation. It is very useful when you read...

whenyoudon'tuseitit'salmostlikenotleavingspaces...

[nico]

and im reminded once again what a bunch of fuck head p.c dick wats are on here eat shit dick munch and shove ya wiring diagram where the sun dont shine ,

simply ask for help and you fuckers dribble on about spelling and writing.

[Max Preload]

The only one dribbling is you.

:rofl: :tugger:

[Laava]

Oh dear, I appear to have come at a bad time?
Nico, sometimes probs like this are simply a bad earth. Check that first, look carefully at all the wiring coming out of the switch blocks and gauges, and the battery terminals. Make sure that all other bulbs are going as well. Good luck. And don't get too het up with the humourists!

[vifferman]

There's no easy answer for this, Nico. It sounds like corrosion in the back of the instrument cluster, which is a not uncommon problem with the Printed Circuit Board (PCB) on VFRs, so you're going to have to take the fairing off and look behind there. Get some contact cleaner and cotton buds and carefully clean things.
I suggest you check this out too:
VFR PCB faults and fixes (http://www.bikersoracle.com/vfr/forum/showthread.php?t=76160).
It's labeled as being for the 98-01 VFR800, but the principles are the same.

[nico]

chers vifferman thts kinda what i wes thinking id be since it sints out side at work every day,