Pierce
4th August 2009, 11:57
as per title...
Bought for $230, selling for $150
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Performance/auction-234120708.htm
These are superb, more and more riders around the World are discovering by adding a Steahly Weight they can go faster for longer with the smooth power delivery, better traction and reduced stalling.
Adding a Flywheel weight will increase the rotating mass, or inertia of the motor. The result is a motor that is a little slower to rev, has more controllable power delivery and less hard hitting power, more usable mid-range and is less likely to stall at slow speeds or with the rear brake being applied.
These will transform your motocrosser into a lightweight trail riding weapon!
other features:
#BETTER TRACTION WHEN SLIPPERY OR WET
# MORE TORQUE WITH A BROADER POWERBAND
# BETTER TOP END POWER WITH LESS TENDENCY TO LOSE RPM'S WHEN CLIMBING OR HITTING OBSTACLES
# MOST JUST SCREW OVER THE TOP OF THE STOCK IGNITION FLYWHEEL
# FITMENT IN LESS THAN 1/2 AN HOUR
# MACHINED FROM SOLID BILLET STEEL
# STEAHLY HAVE BEEN MAKING FLYWHEEL WEIGHTS FOR 19 YEARS AND HAVE MANY OF THE TOP RIDERS IN ALL PURSUITS USING THESE FLYWHEEL WEIGHTS!
### Cost $230 new ###
Xtreme Wholesale Supplies have just completed DYNO tests on an 06 CR250
Not only did the CR make more Torque in the mid range but it also made more HP, including just over a 1HP gain at the Top end!!!!! Cheap HP I can tell you!
Bought for $230, selling for $150
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Performance/auction-234120708.htm
These are superb, more and more riders around the World are discovering by adding a Steahly Weight they can go faster for longer with the smooth power delivery, better traction and reduced stalling.
Adding a Flywheel weight will increase the rotating mass, or inertia of the motor. The result is a motor that is a little slower to rev, has more controllable power delivery and less hard hitting power, more usable mid-range and is less likely to stall at slow speeds or with the rear brake being applied.
These will transform your motocrosser into a lightweight trail riding weapon!
other features:
#BETTER TRACTION WHEN SLIPPERY OR WET
# MORE TORQUE WITH A BROADER POWERBAND
# BETTER TOP END POWER WITH LESS TENDENCY TO LOSE RPM'S WHEN CLIMBING OR HITTING OBSTACLES
# MOST JUST SCREW OVER THE TOP OF THE STOCK IGNITION FLYWHEEL
# FITMENT IN LESS THAN 1/2 AN HOUR
# MACHINED FROM SOLID BILLET STEEL
# STEAHLY HAVE BEEN MAKING FLYWHEEL WEIGHTS FOR 19 YEARS AND HAVE MANY OF THE TOP RIDERS IN ALL PURSUITS USING THESE FLYWHEEL WEIGHTS!
### Cost $230 new ###
Xtreme Wholesale Supplies have just completed DYNO tests on an 06 CR250
Not only did the CR make more Torque in the mid range but it also made more HP, including just over a 1HP gain at the Top end!!!!! Cheap HP I can tell you!