View Full Version : Help for RG150
Bala
2nd April 2005, 10:03
Just got this bike 98' and has done 30K. I rode the bike for about 35Kms and the temp. gauge just didnt budge. Is this OK?
There seem to be no lights in the RPM & temp gauge or have the bulbs fused.
Can you also tell me how many K's I can get on a tank of gas?
Two Smoker
2nd April 2005, 13:01
Hey mate,
Temp gauge always reads low on the bike... Ive blown mulitple lights in thew rev count due to doing too many hard landing stoppies...
Tank of gas: 200km at commuting speed/ taking it easy
140km at fast road riding speed
120km is the worst ive had, but i was banging of the limiter for
for quite a while
neil_cb125t
3rd April 2005, 21:41
hey dude how long you been on the RG?
Ive got a few issues with my front brakes theyre shite!!! cleaned pistons new pads and bleed them the only thing havent done is seals, going to do my first round then replace them.
temp will stay low, can get mine up by bout a millimeter but thats givin her the beans and i running the race coolant and a few other mods.............
2 schmoke
5th April 2005, 19:04
yeh i have the same problem with my temp gauge.. its just not connected properly :niceone:
how many k's u ghet depends on how you're riding, if you;re giving it shit heaps ull get about 200k's
Two Smoker
5th April 2005, 19:10
hey dude how long you been on the RG?
Ive got a few issues with my front brakes theyre shite!!! cleaned pistons new pads and bleed them the only thing havent done is seals, going to do my first round then replace them.
Use dot 5.1 replace all seals (i found the mastercylinder one was the big problem) and whack in some SBS pads... and that adds up to mint brakes... Since i dont race in streetstock anymore, ive got me some braided lines pppppphhhhhhhoooooaaaaa mean rolling stoppies...
Bala
6th April 2005, 08:07
It is just about a week now. I have done about 260k' and it is still going. Hope I dont get stuck anywhere without gas ( reserve helps keeping fingers crossed if the tap is buggered).
Bala
9th April 2005, 09:44
I had a oil leak. Took it to a dealer. I was told that I need a new packing and some seals for the power valve. I wasnt convinced and opened it at up. There is a rectangular cover above the exhaust. There was a bolt missing and the other ones loose. Fixed them.
Can someone tell me what this cover(plate) is for???
Two Smoker
9th April 2005, 11:16
I had a oil leak. Took it to a dealer. I was told that I need a new packing and some seals for the power valve. I wasnt convinced and opened it at up. There is a rectangular cover above the exhaust. There was a bolt missing and the other ones loose. Fixed them.
Can someone tell me what this cover(plate) is for???
to stop exhaust gasses and crud coming out... helps to have a good seal...
eager
9th April 2005, 18:02
the temp gauge thing is aparently normal, i was told when i got my bike that the piece of plastic covering half the radiator helps to increase the temp. do a search on google i think there was a article on it somewhere.
what the highest speed the rg150 can actually go, ive had it about 155-160 on the country roads
and another quick question, what fuel are you using in the bike, 91? 96?
thanks
Two Smoker
9th April 2005, 18:12
the temp gauge thing is aparently normal, i was told when i got my bike that the piece of plastic covering half the radiator helps to increase the temp. do a search on google i think there was a article on it somewhere.
what the highest speed the rg150 can actually go, ive had it about 155-160 on the country roads
and another quick question, what fuel are you using in the bike, 91? 96?
thanks
165kmh, i use 96... lowers the chance of knocking (due to me being a bit mean on the engine...)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.