RC Blackbird SR71. Is this cool or ICE COOL!?

[Edbear]

http://www.fark.com/cgi/vidplayer.pl?IDLink=4464984

[paturoa]

I've seen a real one do fly bys, but not as good as that!

[Mikkel]

That has got to be the coolest thing I have ever seen.

Give that man a medal!

[Blackbird]

Nice find Ed! There are some great RC models on YouTube - Phantoms, B52's and so on. There are also a few RC vids on YouTube shot at the Tokoroa airstrip as they have some great fly-in's there.

[boman]

That is beyond cool. Very nice.

:yes::cold::yes::woohoo:

[Marmoot]

It's cute, but it's still a toy.

However, these would set you free.
http://www.youtube.com/watch?v=8wu1Bwhuh4M
http://www.youtube.com/watch?v=nUAvu2AE9g0&feature=related
http://www.youtube.com/watch?v=Df8uC5B8DoE&feature=related
http://www.youtube.com/watch?v=znTUcVj4sSk&feature=related

[Edbear]

Nice find Ed! There are some great RC models on YouTube - Phantoms, B52's and so on. There are also a few RC vids on YouTube shot at the Tokoroa airstrip as they have some great fly-in's there.

I've seen the B52 one, that's cool as well.

These guys have got talent for sure!

[AllanB]

Very cool.

Funny thing is I though it was going to be some secret new mega-road-burner V4 Honda Blackbird!

[Devil]

That was awesome!

[banditrider]

That is beyond cool. Very nice.

:yes::cold::yes::woohoo:

+1!


I've seen a real one do fly bys, but not as good as that!

You lucky sod!

[nudemetalz]

Nice find Ed! There are some great RC models on YouTube - Phantoms, B52's and so on. There are also a few RC vids on YouTube shot at the Tokoroa airstrip as they have some great fly-in's there.

you mean like this one ?? Just as cool as the SR71 :)

http://www.youtube.com/watch?v=bN4PQQzS2BM

[nudemetalz]

and they get bigger !!!!! :eek5:

http://www.youtube.com/watch?v=c5FjTcctkC4&NR=1

[Swoop]

Very nice SR-71!

This is also entertaining...
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/9zkBjbMEJYk&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/9zkBjbMEJYk&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></embed></object>

[R6_kid]

I quite like this one - an RC Sea Fury with a 5cyl Radial.
I've seen model V12 merlins but haven't found one being used in a plane, they are usually just on test frames and minus a supercharger.

8FqjWbygAhI

[paturoa]

"... seen real fly by"

You lucky sod!

A little off topic here.....

Yeah, it was '87 at the annual Reno Air Races in Nevada. Fly-bys I can remember SR71 full after burner pull out etc, B52, B1B, U2, the latest jets of the age, a gaggle of hopticoptors, P38 demo (the engines off routine), P47 demo, ah the memory fades.......

The pylon racing was stunning! Serious money required for that stuff!

[Big Dave]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/e18eE33juE8&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/e18eE33juE8&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></embed></object>

[Bass]

Don't laugh too hard - there's some serious science at work there.
The SR 71 for example. My guess would be about $45,000 construction cost. The turbines would be about $8,000 each, fully computerised with automatic start sequence,compressor pressure and exhaust gas temperature sensing, oil injected ceramic mainshaft bearings and a maximum mainshaft speed of about 180,000 rpm.
In terms of engineering, they are decades ahead of anything that ever came out of Milwaukee.
The capabilities of modern radio control gear are a whole different chapter, as are the construction techniques and materials used in the model itself.
Sure, they are still toys, but in a sense, so are F1 cars.

[gijoe1313]

The next gen of RC "toys" will be gliding/cruising over the surface or Mars in the near future! I always love the ingenuity of the creators and the passion that goes into them.

And the pain that occurs when failure pronounces a terminal impact with earth! :pinch:

[Devil]

Don't laugh too hard - there's some serious science at work there.
The SR 71 for example. My guess would be about $45,000 construction cost. The turbines would be about $8,000 each, fully computerised with automatic start sequence,compressor pressure and exhaust gas temperature sensing, oil injected ceramic mainshaft bearings and a maximum mainshaft speed of about 180,000 rpm.
In terms of engineering, they are decades ahead of anything that ever came out of Milwaukee.
The capabilities of modern radio control gear are a whole different chapter, as are the construction techniques and materials used in the model itself.
Sure, they are still toys, but in a sense, so are F1 cars.

I got the impression that the SR71 in the video may have just been single turbine in the centre (of course would have had to have intake to match), but was just paying attention to the guy starting the thing.

I could be completely wrong though...

[R6_kid]

I could be completely wrong though...

Having had a good look at a turbine powered RC jet first hand, and looking at the size of the SR71 model, I'd have to say it's running two - that's a fairly substantial aircraft to be powered by only one model turbine (they aren't THAT powerful).

If you look on Youtube there is an RC Grumman Tigercat which is running two 400cc 5cyl Radial engines - that's gonna sound awesome when it's flying!

[one-speed]

http://www.fark.com/cgi/vidplayer.pl?IDLink=4464984

cool
Wonder if they could strap ya on and go a Weee fly lol

[Bass]

I got the impression that the SR71 in the video may have just been single turbine in the centre (of course would have had to have intake to match), but was just paying attention to the guy starting the thing.

I could be completely wrong though...

He had an inspection hatch open in the middle of the fuselage for sure, but that means nothing nowadays. He may have been checking clean fuel flows from a central tank. Air bubbles can get an instant motor stop. An engine start on a turbine is just the flick of a switch on the transmitter.

[Bass]

that's a fairly substantial aircraft to be powered by only one model turbine (they aren't THAT powerful).



As I recall, the largest commercially available model turbine puts out about 18 kg of thrust which would be enough to fly that model more than adequately. However, the clip demonstated a pretty good vertical performance and so I tend to think that you are right and that he is running 2 turbines.
Incidentally, there is a microlite ( the Cri Cri as I recall) available that's powered by a couple of those turbines. I have often wondered why, because while they are effective enough, their compression ratio is quite low (about 2.8 to 1) which means that they are pretty inefficient and really drink the fuel. The result is an eflux velocity of a bit under mach 1 where a full size turbine efluxes at typically a bit over mach 2