Wave front discs to suit nearly ANY bike

[neil_cb125t]

Pair of Wave rotors in either Black or Gold Carriers, these are made out of Aluminium alloy inner ring & Stainless steel outer ring

These discs have to be imported so take approx 3 working weeks to arrive.

$450.00 for the Pair - plus NZ postage. VERY CHEAP!!

Can also source rear wave discs for approx $100 each

http://www.trademe.co.nz/Browse/Listing.aspx?id=265202053 for more details


PM me for any details or check trade me add

[neil_cb125t]

For sale NEW WAVE discs - i can import these from UK

front pair $450.00 rears can be found also around $100.00 nz also

Havent found any model we can't get.

check trade me add for dets

http://www.trademe.co.nz/Browse/Listing.aspx?id=265202053

[neil_cb125t]

Hi all - found a way of importing these see listing - pretty much fit any bike.

$450.00 a PAIR LANDED

http://www.trademe.co.nz/Browse/Listing.aspx?id=265202053

[mokomoa]

any for a 2002 aprilia rsvr???

[Cr1MiNaL]

Pair of Wave rotors in either Black or Gold Carriers, these are made out of Aluminium alloy inner ring & Stainless steel outer ring

These discs have to be imported so take approx 3 working weeks to arrive.

$450.00 for the Pair - plus NZ postage. VERY CHEAP!!

Can also source rear wave discs for approx $100 each

http://www.trademe.co.nz/Browse/Listing.aspx?id=265202053 for more details


PM me for any details or check trade me add

Free bump...

[SuperSonic]

How much and do you have any for a Suzuki Sv1000 k3?

[Squiggles]

These the same ones that're all over ebay?

[SuperSonic]

These the same ones that're all over ebay?

I think so, also on trademe too, if they are the same, they sure look the same. Does anyone know someone with them on? To find out what they are like?

[NZsarge]

I think so, also on trademe too, if they are the same, they sure look the same. Does anyone know someone with them on? To find out what they are like?
Yes i'd be interested in getting an opinion/feed back on these too. Would also like to know who makes these rotors, are they made by "Braking" or some other manufacturer?

[SuperSonic]

Yes i'd be interested in getting an opinion/feed back on these too. Would also like to know who makes these rotors, are they made by "Braking" or some other manufacturer?

I do kinda know that answer, they are made somewhere for companies like "Braking",(mm a seller will not say where as he say's he does not know mm?) but are so cheap due to not been branded by people like "Braking". BUt that really does not clear up where or how or who for before branding? Also I take it these are not like seconds, eg a named company say's "not up to our standed start again please" so manufacturer sellls them cheap else where.?

[quickbuck]

All i will say to this is...... Once Neil fits them to his bike, try and out brake him into Toyota at Manfeild... and see how good they are.

True all discs aren't created equal, but in saying that, neither are pads.
The trick is to get a disc/ pad combo that suits YOUR braking requirements, and run with them... Or stop, as the case is....

See you all on the 31st then????

[SuperSonic]

All i will say to this is...... Once Neil fits them to his bike, try and out brake him into Toyota at Manfeild... and see how good they are.

True all discs aren't created equal, but in saying that, neither are pads.
The trick is to get a disc/ pad combo that suits YOUR braking requirements, and run with them... Or stop, as the case is....

See you all on the 31st then????

Sweet ok then, ...............ah Neil right then............ah what race number would that chap race under then? I will chase him down(in the paddock that is) and ask him how they are working out form him.:niceone:

[quickbuck]

Sweet ok then, ...............ah Neil right then............ah what race number would that chap race under then? I will chase him down(in the paddock that is) and ask him how they are working out form him.:niceone:

What, you can't work it out from the sponsorship?? May be we need to do a publicity drive.
#176

Look for the big "Step Up" Banner......

[SuperSonic]

What, you can't work it out from the sponsorship?? May be we need to do a publicity drive.
#176

Look for the big "Step Up" Banner......

Right te ho then, see ya on 30 and 31. :-)

[sharky]

For sale NEW WAVE discs - i can import these from UK

front pair $450.00 rears can be found also around $100.00 nz also

Havent found any model we can't get.

check trade me add for dets

http://www.trademe.co.nz/Browse/Listing.aspx?id=265202053


Hope you're not planning on using them in Posties;););)

[neil_cb125t]

How much and do you have any for a Suzuki Sv1000 k3?

yep easy $450 plus NZ postage for front 2

[neil_cb125t]

any for a 2002 aprilia rsvr???

hi the listing ive found has OD of 320mm - ID hole of 64mm Bolt hole dia 8.4mm with 10mm run out - this sound right?? its listed as a 2004 RSVR

[neil_cb125t]

Hope you're not planning on using them in Posties;););)

ha ha na but ill have my norm discs for posties... hehe

[Jim Shady]

Gidday, looking for a rear disk for a 97 tl1000s, would you have something suitable?

[alcatraz]

They are made by Galfer heres the website http://www.galferusa.com/ galfer brake rotors.

[Cr1MiNaL]

[QUOTE=quickbuck;1129609323]All i will say to this is...... Once Neil fits them to his bike, try and out brake him into Toyota at Manfeild... and see how good they are.
QUOTE]

Neil huh... thought his name was Chappy lol:(

[SuperSonic]

They are made by Galfer heres the website http://www.galferusa.com/ galfer brake rotors.

Cheers they do look the same.

[Hotte]

Hi Neil,
Please quote a pair of front disc for Yamaha TDM 850 1992. regards Hotte[EMAIL="h_w_eisenhauer@yahoo.com"]

[neil_cb125t]

Hi Neil,
Please quote a pair of front disc for Yamaha TDM 850 1992. regards Hotte[EMAIL="h_w_eisenhauer@yahoo.com"]

Cheers i will do in the next few days still on holiday!!

[mokomoa]

hi the listing ive found has OD of 320mm - ID hole of 64mm Bolt hole dia 8.4mm with 10mm run out - this sound right?? its listed as a 2004 RSVR

2002 not '04. I think they are different..

[neil_cb125t]

Hi peoples

Most request have been answered - The Aprillia millie i found that the discs should be the same ie from 2001 to 2004. a good site to check is http://www.metalgear.com.au/mgmodel.asp

the only bike i could not find is the CBR250 with a OD dia of 276mm - im hoping to place another order ASAP.

I also am racing at the PMCC meeting on Sunday at manny and will have the rotors on display there - please stop by and check them out!!

prices are still $450 for fronts rears are around $100-120 but ca do a full set front and rear for around $500 ( due to postage savings )

catch you all soon

chappy:headbang:

[The_DudE]

looking for a pair for 94 kawasaki ZX9R B1??

[neil_cb125t]

pm sent yes easy as