PDA

View Full Version : KTM power valve adjustment?


flyingcr250
24th January 2010, 16:17
anyone know if you can adjust the power valve other than changing the springs? dou you just turn the adjusting bolt were the spring goes??
Rupe
24th January 2010, 17:18
anyone know if you can adjust the power valve other than changing the springs? dou you just turn the adjusting bolt were the spring goes??

Just burn it


pm reckless he knows
jt119
24th January 2010, 17:21
ya Just burn it
andy 101
24th January 2010, 17:26
anyone know if you can adjust the power valve other than changing the springs? dou you just turn the adjusting bolt were the spring goes??

Yea ya can use a flat bladed screw driver, only turn the dolly screw out to flush with the case or about 2 turns in from standerd I ajust mine all the time.
flyingcr250
24th January 2010, 17:41
Yea ya can use a flat bladed screw driver, only turn the dolly screw out to flush with the case or about 2 turns in from standerd I ajust mine all the time.

so in =aggresive and out=passive?
Pornstar
24th January 2010, 18:00
anyone know if you can adjust the power valve other than changing the springs? dou you just turn the adjusting bolt were the spring goes??

http://www.ktmforum.co.uk/forumdisplay.php?94-Off-Road-Enduro&order=desc

Try this site dude, can be helpful to the decerning rider.
andy 101
24th January 2010, 18:02
so in =aggresive and out=passive?

Other way around turning the dolly screw out takes preload off the red green or yellow spring and the power valve opens sooner screw in adds preload and the power valve and opens fully later.
andy 101
24th January 2010, 18:05
http://www.ktmforum.co.uk/forumdisplay.php?94-Off-Road-Enduro&order=desc

Try this site dude, can be helpful to the decerning rider.

You try the ktmtalk site as well there is a massive amount of info there.