Log in

View Full Version : WTB: NC30 parts



HenryDorsetCase
8th February 2010, 09:11
I have just started to put togetherthe NC30 I bought in parts .

One of the engine mount bolts is missing, and so is one of the spacers.

the bolt that is missing is one of the "special" ones: as you sit on the bike it is the top, rear bolt: its a two part thing, the outer screws thru the frame to take up slack in the engine mounts and the inner is the locknut. Also missing is the3mm spacer that goes between the engine and the frame on the long thru bolt that passes under the swingarm. That is less critical in that I can get something machined up if necessary, but it will be easier to use the standard parts if possible.

Since this motor is designed to be solidly mounted to the frame (V4 with perfect primary balance) then I would like to have the correct number of bolts holding it in.


Anyone wrecked one? got anything lying around?

I also need some stock parts (things like stock inner rear guards) but the engine mount bolts are critical!

PM me. I am interested in whatever you might have lying around. I also have extra stuff I want to get rid of so let me know what you need.

crazyhorse
8th February 2010, 11:23
(bump.....)

motorbyclist
9th February 2010, 09:45
got a left stwitchgear assembly? I'm after the headlight hi/lo switch

The Pastor
9th February 2010, 10:27
got a left stwitchgear assembly? I'm after the headlight hi/lo switch

I could sell you one for $50 bucks, if u give me the spring ;) it'd be the entire switch block tho.

motorbyclist
9th February 2010, 11:44
done.... see you friday?

HenryDorsetCase
9th February 2010, 20:09
Got the missing pieces today in a courier bag. www.econohonda.co.nz could not have been more helpful or easier to deal with, paid by credit card and 24 hour turnaround. Totally recommended. Not cheap but not expensive either when compared with David Silver's quote.

me happy.

I will need other bits in due course, some of which might be kicking around in people's sheds: inner rear guards, battery box to start with.