Pit Stands /garage stands

[FROSTY]

Most modern sports bikes only have sidestands -makes chain lube or rear wheel removal pretty hard. Heres the solution. Also a lot more secure way to store your bike around kids or cage drivers.(the handle acts as a locking device to prevent the stand rolling over forwards and dumping ya pride and joy.
The rear stand folds flat when not in use.
I Have universal rear stands to fit all size bikes from 50cc- 1500cc -They lifted my GTR1000 which is bloody heavy.
I have 2 types of atachments for them--the universal padded type and the V groove type for bikes with bobbins on the swingarm
I also have the bobbins for swingarms on bikes with the threads in them
Front fork stands to lift the front end up to fit tyre warmers or remove the front wheel
steering head stands -they lift the bike by the center of the steering head so you can remove the entire front end.
Single sided swing arm stands for honda vfr/rvf or ducatis
I got us a pretty good price on these stands.
Rear folding stand is $139.00
Single sided swingarm-$240.00
Front bottom of fork type stand $135.00
Front head stand $160.00
rear stand folding with a steering head center adaptor unit $220.00pit stands

http://www.kiwibiker.co.nz/forums/showthread.php?t=3506
Heres a link to the pictures

[Skunk]

What's an estimate for freight to Wellington for a rear folding stand and a front head stand?

[JohnBoy]

hmmm... sounds good. at the moment i am looking for a rear paddock stand and i would need bobbins too. can you provide some photos??

[FROSTY]

Skunk--play ya cards rite and itd be freigh free--Ie MR and TS are at manfeild soon
Johnboy-I friggen tried to cutnpaste from an old thread-scroll back about5 pages and youll see the pics.

[MSTRS]

Having just got one of the rear stands from Frosty, I can highly recommend them. Light, versatile, easy to use, excellent value. GET ONE.

[FROSTY]

ok link to pics is attached

[Sheep Dags]

hey frosty the rear one wouldn't work on the VFR would it? cause of the single sided swing arm... else i'd be keen as mustard

[FROSTY]

nope dags it wouldnt--but the single sided swingarm one would--ie Im using it now to support the viffer750 now

[Sheep Dags]

shit i might be keen.
been thinking about what you said about turning the VFR into a track bike and I'm getting keener by the minute. Gonna pull the front apart and see to what extent the damage is.

[FROSTY]

Personally I reckon it'd be the best thing for ya --Track day/race bike
KK Im sure will tell ya their the ducks nuts -and Gary at GP trading knows all the little HP raising tricks for em too

[Sheep Dags]

yea and an aftermarket exhaust is a must too! i mean, i did put a wee dent in mine so might have to replace it don't you think? :-p

[FROSTY]

well ive still got a coyuple left

[Skunk]

well ive still got a coyuple leftI'm workin' on it, I'm workin' on it! Honest!

[FROSTY]

hokley dokley still have stock of these cool pit stands

[mikey]

i sell pit stands. fits any bike. not my prob if bike falls over though means you didnt use my stand properly. consists of three bits of 4x2 on there side. 5 easy paymetns of 150.99 an if you pay by credit card ill mke it two pit stands an if you order right fucking now ill throw in another one.\
\
\
buy nme

o8oo im to cool for a pit stand

[FROSTY]

whatever mikey ya chump.
awrighty you lot I still have some left

[ajturbo]

so .... if i get one.. do i get a bike also???:devil2:

[FROSTY]

boing--still gottem if wanted

[mini_me]

any single sided ones left?

[Sensei]

Shop here selling front & rear stands as a pair for $199 . It don't get any cheaper than that !

[FROSTY]

still have stands available

[FROSTY]

bouncing this up for those who did spanner night

[placidfemme]

Hey Frosty... If Sam and I wanted to buy one...

(a) would it be alright to use with both the ZXR & the FXR?
(b) would delievery be possible as by the looks of them I don't think it'd fit that good on the back of my bike...

Thanks

Tam & Sam

[FROSTY]

PF-no worries--Yes the stand will be fine on both bikes.
You'll need to adjust the support rods to suit the different width swingarms is all

[placidfemme]

PF-no worries--Yes the stand will be fine on both bikes.
You'll need to adjust the support rods to suit the different width swingarms is all

Sweet thanks Frosty... Just need to get the Rego for Sam's bike, then we'll see what we can scrape together...

lol last time I cleaned my chain and sprocket, I had the bike jacked up with a car jack and leaning against the wall... and yes.... it fell down :( So one of these is deffinatly a "must get" in my books :)

[FROSTY]

PF --I tell ya what -gimme a yell--If ya definitely want one ill see what I can do

[FROSTY]

boiiing bounce

[ben444]

Have got any single sider's and fronts??