F1 Error - 2006 GSX-R 600.

[Silent Knight]

Hey guys,

This morning when I started up the bike I saw a red light come on next to the oil temp display on the dash and an error flashing saying "F1".

Can anyone tell me what exactly this error means or what I should be checking to resolve whatever problem has caused it?

Cheers,
Hanré

[imdying]

Get a copy of your service manual, it will detail how to get the fault code (you'll need to jump a couple of pins on the service connector), and what the resultant code means. No biggy, take you about an hour the first time. Could be anything, possibly a sensor gone bad, or maybe something like the SET valve jamming.

[nodrog]

it would have said "FI", not "F1" which just means it has logged a fault code, you will need to take it to a dealer to get them to bring up the correct code. (you can fuck around and cross wires and shit to bring up the code, but its easier to take it to the dealer)

p.s. if its not on now, and it has gone out soon after you started it, i would say it was the exhaust valve playing up.

[onearmedbandit]

Get a copy of your service manual, it will detail how to get the fault code (you'll need to jump a couple of pins on the service connector), and what the resultant code means. No biggy, take you about an hour the first time. Could be anything, possibly a sensor gone bad, or maybe something like the SET valve jamming.

+1. You could also just google for the codes as they are posted on motorcycle forums almost everywhere.

Click here for photos on how to check the fault code. (http://pnwriders.com/mechanical-technical/69250-gsxr-dealer-mode-fault-codes-please-sticky-thread.html)

[Crazy Steve]

it would have said "FI", not "F1" which just means it has logged a fault code, you will need to take it to a dealer to get them to bring up the correct code. (you can fuck around and cross wires and shit to bring up the code, but its easier to take it to the dealer)

p.s. if its not on now, and it has gone out soon after you started it, i would say it was the exhaust valve playing up.

Exhaust valve playing up....YEP happened on mine and Winjas

Crazy Steve.

[onearmedbandit]

p.s. if its not on now, and it has gone out soon after you started it, i would say it was the exhaust valve playing up.

The exhaust midpipe valve is the most common source of FI faults, usually requires cleaning and a bit of lube.

Click here for a list of fault codes. Sorry not 100% if they are model specific. (http://www.gsxr.com/showthread.php?t=1234)

[nodrog]

The exhaust midpipe valve is the most common source of FI faults, usually requires cleaning and a bit of lube.

i find throwing it in the rubbish and pulling the brown wire out to be the most cost effective soloution.

[onearmedbandit]

Haha, very true.

[Pussy]

it would have said "FI", not "F1" which just means it has logged a fault code, you will need to take it to a dealer to get them to bring up the correct code. (you can fuck around and cross wires and shit to bring up the code, but its easier to take it to the dealer)

p.s. if its not on now, and it has gone out soon after you started it, i would say it was the exhaust valve playing up.
Yep, I'd lay money that the fault code you will get is "C46"... the EXCVA.
I have adjusted the cables on the two sem fiddys in this household, and Nicksta's six hundy... solved the problem. They can be within spec according to the manual, but still throw a fault every now and then. When they're adjusted to the nth degree, they're all sweet

[Pussy]

Oh... with the K6 onwards six hundy...the fault will be stored in the ECU, your dealer can hook up the SDS tool and get the results in seconds

[yungatart]

If you've turned the key off then the fault code may or may not still be logged. Hooking up to the dealer diagnostic computer will give an answer there and if so, what code it is. You can jump the 'thingy" plug using the likes of a paper clip but the temperature number will then be a series a dashes unless it faults again, in which case the error code number will be displayed.
Mstrs had a fault code problem on his SRAD, the error codes said it was a problem with fuel injectors, but it turned out to be a dirty connection on the battery terminal.

[Pussy]

If you've turned the key off then the fault code may or may not still be logged. Hooking up to the dealer diagnostic computer will give an answer there and if so, what code it is.
On the 05 onwards 1000, and 06 onwards 600 and 750, the fault code will be stored in the ECU

[imdying]

Read the workshop manual, it's all very straight forward. Unless you're not equipped with the most basic of tools, or have very little spare time, you'd be a bit silly to bother taking it to a dealer to pay to find out what a paper clip could tell you for free. Don't worry if the FI light has gone away, if it's truly faulty, or becoming faulty, it'll be back soon enough.

Now, having said that, if you brought it new, and your dealer normally services your bike, I would be surprised if they wouldn't plug it into the SDS and tell you what's up for nix (lets face it, it's not a big job for them, and there's the possibility of workshop work for them, not to mention next to free good will which they can't buy any other way). At least, you'd like to think so... give them a ring.

Poor old Mr SET Valve lives in a pretty harsh environment, and as with anything like that, maintenance maintenance maintenance is the key. A little love will generally see it right, oodles of threads around the net on how to accomplish that.

[Hitcher]

The real answer is that it does actually say F1 error. It's because Lewis Hamilton's team fucked up badly in qualifying for the Malaysian GP.

[Silent Knight]

Thanks guys.

Yea I searched around on gixxer aswell and found some instructions on how to check for errors. I started up the bike again this morning and the error was gone so I'm assuming it's not a major. Will check for error codes over the weekend when I get a tad more time!

[MSTRS]

Try using the bike for a while with the jumper installed. If and when it faults again, you will have the code #. And/or take it to your mechanic to check logged fault/s.

[Shaun]

Thanks guys.

Yea I searched around on gixxer aswell and found some instructions on how to check for errors. I started up the bike again this morning and the error was gone so I'm assuming it's not a major. Will check for error codes over the weekend when I get a tad more time!

When the code comes up again, DO NOT turn ignition off, Just stall the bike then give me a call on 06 7567744. Make sure you have a paper clip with you, piece of piss

[Silent Knight]

When the code comes up again, DO NOT turn ignition off, Just stall the bike then give me a call on 06 7567744. Make sure you have a paper clip with you, piece of piss

Thanks mate, will remember when it happens again!

[Pussy]

Silent knight... the fault code WILL be stored in the ECU.
PM me your email addy, and I can send you the service bulletin on adjusting the SET cables.
Your local dealer will be able to retrieve the information on the fault in a matter of seconds

[sinfull]

Wasn't my fault !