Big V-Twin

[Sensei]

Thought there where some fairly big V-Twin been brought out lately till a Harley owner mate at work that has a 2.5L Merch in his FXR with GSXR 1100 front & back end on it told me about this company called DUX that is making the motors below with massive BHP & torque . would be good to try one if the frame could hold together long enough . Check the link thats big 3.35 litre / 3350cc V-twin that will fit into a stock Harley frame

http://www.harleycustom.com/product.php?cat_id=14&man_id=234&prod_id=2931

[nallac]

Holy fuck....."The dual carb 200in is designed to make over 260 RWHP at 6800 RPM."

more power than thou's,busa ,zx14 etc..... shoehorned into a bike with next to no brakes and can't corner(reliative to the forementioned near 200hp sports bikes).

pure madness...h'mm can i make one fit in my Buell...

[peasea]

Thought there where some fairly big V-Twin been brought out lately till a Harley owner mate at work that has a 2.5L Merch in his FXR with GSXR 1100 front & back end on it told me about this company called DUX that is making the motors below with massive BHP & torque . would be good to try one if the frame could hold together long enough . Check the link thats big 3.35 litre / 3350cc V-twin that will fit into a stock Harley frame

http://www.harleycustom.com/product.php?cat_id=14&man_id=234&prod_id=2931

All held together with DUX nuts no doubt.

[Elysium]

The Harley literaly would be a tractor with that power.

[scumdog]

All held together with DUX nuts no doubt.

Hey I've got a FXDX....

[SPman]

So - what sort of vibration would you get with 1.7 litre pistons........

[AllanB]

So - what sort of vibration would you get with 1.7 litre pistons........

All I can hear is the Beach Boys singing in my head ........

[AllanB]

I wondered how the heck it would fit into a stock frame - a 5.75 inch bore (146 mm) is the trick - heck that's probably bigger than some KB users dicks!

Love to hear one at idle (the bike - not your dick!).

[HenryDorsetCase]

All I can hear is the Beach Boys singing in my head ........

Da do ron ron ron, da doo ron ron.....

[HenryDorsetCase]

I wondered how the heck it would fit into a stock frame - a 5.75 inch bore (146 mm) is the trick - heck that's probably bigger than some KB users dicks!

Love to hear one at idle (the bike - not your dick!).

my dick spends a lot more time idle than my bike does these days.

[FJRider]

my dick spends a lot more time idle than my bike does these days.

thank you for sharing that information ...

[SMOKEU]

I laugh when I see $5000 turbo kits for Harleys, and they still put out less power than a standard R1.

[scumdog]

I laugh when I see $5000 turbo kits for Harleys, and they still put out less power than a standard R1.

But neither the R1 nor the Harley owner care....

[Spearfish]

Imagine a start-line of those engines!

This is a bit different its just Mike Edwards having a play with a XR1200. Heavy and under a hundee horses.

http://www.youtube.com/watch?v=2Fze8XhoxaE&playnext_from=TL&videos=fE2D_nrgz64

This one is him playing with another XL competitor about 4 min in

http://www.youtube.com/watch?v=f4Rqfw4-kPs&playnext_from=TL&videos=MzF8pKITwZw

[EJK]

Ow that will put Vmax owners to shame!