Where to get a custom cruiser made in NZ

[Tank]

Have a mate looking for a custom cruiser.

He dosnt just want a Harley with the screaming eagle catalog tacked on - he is after a real bespoke bike made just for him.

He would like to be involved in the build and keep an eye on what is happening, so he wants it made in NZ - not overseas and bringing in the bike once complete.

Budget - well thats his business, but Im sure he know that this will cost more than a gn-250.

Anyone got recommendations - or even an idea if there are places that can do this in NZ?

[CookMySock]

So lemme get this straight ;

He wants a custom cruiser, thats not a harley, with out extensively using parts from a catalog on it (most stuff hand-made), and he would like to visit the workshop :lol: and he would like to help :killingme AAAAAND he would like to offer his opinion about it as well? :shit:

Just those last few non-mechanical things just doubled his hourly rate to begin with, and then there is all the drawing and fabrication from scratch. Maybe you might save him some time by permitting him to COPY some shit from a catalog at the very least! Even at Deus Ex Machina they bolt catalog shit on a vintage bike and charge 22k for it.

And to add insult to injury, he wants it CHEAP??????
In answer to your question "where" - NO FUCKING WHERE is the answer to that. You are pissing into a hurricane. :finger:


Steve

[BoristheBiter]

So lemme get this straight ;

He wants a custom cruiser, thats not a harley, with out extensively using parts from a catalog on it (most stuff hand-made), and he would like to visit the workshop :lol: and he would like to help :killingme AAAAAND he would like to offer his opinion about it as well? :shit:

Just those last few non-mechanical things just doubled his hourly rate to begin with, and then there is all the drawing and fabrication from scratch. Maybe you might save him some time by permitting him to COPY some shit from a catalog at the very least! Even at Deus Ex Machina they bolt catalog shit on a vintage bike and charge 22k for it.

And to add insult to injury, he wants it CHEAP??????
In answer to your question "where" - NO FUCKING WHERE is the answer to that. You are pissing into a hurricane. :finger:


Steve

All you had to say was "no i don't know of anywhere", or not even reply, but you have to go on an abusive rant.
That really shows what type of person you are.

[MIXONE]

Tell him to try Dave at HD Cycles in Hamilton.
A top bloke who does good work.

[MIXONE]

Tell him to try Dave at HD Cycles in Hamilton.
A top bloke who does good work.

[Grumph]

There are two or three sources for getting a classis/post classic race bike built from scratch - given that they need to eat like the rest of us why not approach one of them to see if they have the time/spare capacity to oblige.
Certification & reg may be your friend's biggest problem....other than $$$$$

[nallac]

Theres Houseofcustom in Paeroa, was checking his mean Buell out at the races, single sided swimgarm, twin front discs plus shit loads more.

Heres there Allblacks Harley for sale,with contact details.
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Motorbikes/Cruiser/auction-262457171.htm

[Mom]

There is a palce in Warkworth that makes custom bikes, cant for the life of me remember what it is called, will go and rattle my brain a bit and see what falls out.

[Taz]

And there's this place
http://www.batoutofhell.co.nz/

[Tank]

WOW - you really are a fucktard. Not even a normal one - you are like a fucktard with downs.

I know its hard to imagine - esp for someone that rides a 2k piece of shit ho'bag - but there are some people that like to be different, want something that they have some say in, and are focused more on the bike rather than how cheaply they can do something.

But let me help you.


So lemme get this straight ;

He wants a custom cruiser, thats not a harley, with out extensively using parts from a catalog on it (most stuff hand-made),

Yes - he wants a custom cruiser - and what I said is that he dosnt want a harley (or any other brand) that simply has mass produced "tack on's" - thats not a custom bike - thats a normal bike with bling.

Yes - he understand that means a lot of handmade bits - that was the idea.

Whats your idea of bespoke - new stickers on the ho'bag?


and he would like to visit the workshop :lol: and he would like to help :killingme AAAAAND he would like to offer his opinion about it as well? :shit:

You are think as shit - can you imaging going and asking for a custom bike and just ordering "a custom bike" - no you have to work with the designers and put forward what you want in the bike. Of course you get to offer your opinion - you are telling the guys what the fuck you want built. Like all things - when you are having something created - you might just want to go have a look at the progress. Again this is custom project - not a mass produced piece of shit. Its NORMAL to see the bike in progress and work on the design as it progresses.

At no point did I say he wanted to help build the thing - he would have no idea.


Just those last few non-mechanical things just doubled his hourly rate to begin with, and then there is all the drawing and fabrication from scratch.

He seems focused on the bike - not just the hourly rate - and yes (again for the edgecombe slow of thinking) - he WANTS custom drawings and fabrication.



Maybe you might save him some time by permitting him to COPY some shit from a catalog at the very least! Even at Deus Ex Machina they bolt catalog shit on a vintage bike and charge 22k for it.

He is looking at lots of pics to see what he likes - but he wants something uniquely 'him'. And Im not permitting him anything - its his thing I just said I'd try to get recommendations (of course I also expected the usual uninformed, deranged rants of madmen also - but I wont pass them on)


And to add insult to injury, he wants it CHEAP??????

He's a clever bloke - he know how much things like this cost - at no point did I say cheap. His other toys are out of this world - Im guessing that this bike will be also.


In answer to your question "where" - NO FUCKING WHERE is the answer to that. You are pissing into a hurricane. :finger:

With all due respect (and thats not much, or any) - Im guessing you are better sticking with the budget stuff and leaving the big bikes to the grownups.



Steve

Yeah - we know your name

[CookMySock]

WOW - you really are a fucktard. Not even a normal one - you are like a fucktard with downs. [..] for someone that rides a 2k piece of shit ho'bag - Whats your idea of bespoke - new stickers on the ho'bag? You are think as shit - you are telling the guys what the fuck you want built. ... I also expected the usual uninformed, deranged rants of madmen also... you are better sticking with the budget stuff and leaving the big bikes to the grownups. LOL look at the angry tirade of abuse I trolled you into typing! :killingme

It wasn't hard! :lol:

Steve

[Tank]

LOL look at the angry tirade of abuse I trolled you into typing! :killingme

It wasn't hard! :lol:

Steve

Meh - I stand by my observations of you.

But if it helps - Ill add petty and pathetic.

Edit - thanks for the red rep. Another 9000 or so of them and be catching up to you.

[Murray]

Tell him to try Dave at HD Cycles in Hamilton.
A top bloke who does good work.

I would ditto that looking at some of the bikes he has had or has in his shop!!!

[bogan]

And there's this place
http://www.batoutofhell.co.nz/

do they make ones that arent on fire? I find that bikes are better when the fire stays inside the engine :lol:

If he knows exactly want he wants (sounds like he does or will figure it out before the build anyway) it may pay to get different bits done at different places if theres no one place to do it all, precision engineering places could probably do a good portion of the work, then just send those parts to the chromers and you're halfway there already!

[avgas]

Hoged Customs
http://www.hdcustomnz.co.nz/

Top bloke - prefer getting stuff from him than all the bike shops in Auckland. He used to have some pics on his site of some sweet cruisers, dunno why they are gone now.

[Katman]

LOL look at the angry tirade of abuse I trolled you into typing! :killingme

It wasn't hard! :lol:

Steve

You remind me of skidmark.

[nallac]

There is a palce in Warkworth that makes custom bikes, cant for the life of me remember what it is called, will go and rattle my brain a bit and see what falls out.

that'd be Eastcoast motorcycles. Greg and Darcy

Their Bike Maha posted pics of isn't my cuppa tea,I had a gander at it in wilmots its Very nicely done.



You remind me of skidmark.
Shit, thats an insult to Skiddy...

[Mom]

that'd be Eastcoast motorcycles. Greg and Darcy
Their Bike Maha posted pics of isn't my cuppa tea,I had a gander at it in wilmots its Very nicely done.

That be the place.

[Crasherfromwayback]

It wasn't hard! :lol:
Steve


I bet that's something you're used to hearing.

Meh - I stand by my observations of you.

But if it helps - Ill add petty and pathetic.


Ahhh...some other things he no doubt hears often!

[CookMySock]

Ahhh...some other things he no doubt hears often!Yes, from you an twank all the time.. out of control abusive dolts with no control over how you feel or what you believe. :lol:

Steve

[Rogue Rider]

There is a palce in Warkworth that makes custom bikes, cant for the life of me remember what it is called, will go and rattle my brain a bit and see what falls out.

That guy in Warkworth is a top bloke, his name is Darcy Sheehan, he sold me several bikes over the years and to my friends as well. All top not notch. I know he has 2 new custom choppers in stock freshly built, both 1800cc ones with full back up and warranty.
I also know that he has a very rare early Big Dog chopper from late 90's coming in from usa. I have seen it in pics and its a phenominal looking machine and will be very moderately priced.
If your mate is after a good, reliable bike, and wants the reliability back up for it, Darcy at Eastcoast motorcycles is certainly worth a look. He is also an avid rider and top bloke. He also specializes in EVO harleys as well, and noone does it better that I know of.

Say your a mate of mine and he'll cut you a good deal. He is a small local business with low overheads and top service, like the old days.

[Crasherfromwayback]

Yes, from you an twank all the time.. out of control abusive dolts with no control over how you feel or what you believe. :lol:

Steve

Odd how you nearly always put the lil laughing faces after your posts. I wouldn't mind betting you're the only person that finds you amusing.

What's really funny though...is how you use quotes about yourself to try and fool foolish people you know what the fuck you're talking about.

"What Steve said pretty much summed it up"??? Only if Steve said "I'm a raving poolick that roots goats"

[CookMySock]

Odd how you nearly always put the lil laughing faces after your posts. I wouldn't mind betting you're the only person that finds you amusing.

What's really funny though...is how you use quotes about yourself to try and fool foolish people you know what the fuck you're talking about.

"What Steve said pretty much summed it up"??? Only if Steve said "I'm a raving poolick that roots goats"Hehe, I put laughing faces in my posts because I'm laughing at you. It bothers you doesn't it? :lol:

How did you know about the goats?


Steve

[BIG DOUG]

Geez what does he want I'm building two custom bikes at the moment a 74 hardtail shovel and a 68 hardtail triumph next up will be a 51pan it takes time and you have to have a bit of vision I have seen $100,000.00 dollar bikes that have no flow or idea what is going on and I have seen $5000.00 bikes that look awesome I wouldn't mind doing a hinkley bonnie at some stage if he wants to talk to me pm me as I no some pretty talented people in this country.No offence to bat out of hell but kit bikes just don't do it for me and 240-280 tyres are so 2008 lol.

[miloking]

You remind me of skidmark.

And you remind me of this pic:

[Ferkletastic]

Hehe, I put laughing faces in my posts because I'm laughing at you. It bothers you doesn't it? :lol:

How did you know about the goats?


Steve

"I'm so funny, man the KB guys are gonna see what a chill d00d I am not letting these big meanies get under my skin, they really like me, really.."

*has a signature full of people saying nice stuff amout me*

Man, you're not insecure at all are ya lil buddy?

[Big Dave]

They make Road Rage Custom motorcycles downstairs at AMPS. As good as any I have seen at wheels-up builds.
Plus they are associated with Performance Cycle Wholesale who are the importers of much of the bling kit - and have Ray Pratt's name behind them.

Dave Anderson at Deus is also an outstanding engineer and I'd talk to him too.

[onearmedbandit]

So lemme get this straight ;

He wants a custom cruiser, thats not a harley, with out extensively using parts from a catalog on it (most stuff hand-made), and he would like to visit the workshop :lol: and he would like to help :killingme AAAAAND he would like to offer his opinion about it as well? :shit:

Just those last few non-mechanical things just doubled his hourly rate to begin with, and then there is all the drawing and fabrication from scratch. Maybe you might save him some time by permitting him to COPY some shit from a catalog at the very least! Even at Deus Ex Machina they bolt catalog shit on a vintage bike and charge 22k for it.

And to add insult to injury, he wants it CHEAP??????
In answer to your question "where" - NO FUCKING WHERE is the answer to that. You are pissing into a hurricane. :finger:


Steve

Words fail me. Really they do. Now if only the internet would fail you.