Where to get a 13-tooth FXR sprocket?

[Arronduke]

Any ideas where to get a 13tooth sproket FXR?

thanks

[Henk]

Any bike shop.
What do you want one for? You won't need one for Mt Welly, Taumarunui or Roys Hill. Go for a 12 instead.

[Arronduke]

Henk, cheers its a 12 that I need then.

Will try Colmans.

[RDjase]

Any ideas where to get a 13tooth sproket FXR?

thanks

Common sprocket spline, I used a 15T KR150 one on my sons FXR at Taupo, I think the Honda spline is the same too, just the Honda has that locking plate set up with 6mm holes in it. I think the sprocket I got have the 6mm holes as well

I will get my sprocket parts numbers and post them here

[kel]

Arron
JT sprockets JTF1263 or JTF415, these go down to 11 teeth. You'll need to make up a spacer to place it correctly, I used a washer off a big dyna bolt I had laying around. Any bike shop will get the JT sprockets in for you, usually next day delivery.

[RDjase]

The sprockets have a Big W on them for manufacturer

13T 95-042513

14T 41614C

Both have the 6mm holes and the locking plate off the KR150 fits them

[RDjase]

the sprockets have a big w on them for manufacturer

13T 95-042513

14T 41614c

both have the 6mm holes and the locking plate off the kr150 fits them

12T 42512c

[Rusty Demon]

I got one from the local Suzuki dealer ($20 bucks approx.) but you'll need a 1mil spacer on each side of the sprocket.