Log in

View Full Version : Hayabusa footpegs?


Stylo
20th February 2011, 18:04
Gen 2 'Busa, anyone know where to source a set of lower footpegs for my ride ?

Just need a bit more room in the cockpit due to a leg injury from a while ago .(non Bike related )
White trash
20th February 2011, 18:08
Go to a Buell dealer and order some footpegs for a Lightning. They have an inch drop and should fit the factory Suzuki peg mounts no problem.

They used to be cheap as chips too.
Stylo
20th February 2011, 19:42
Go to a Buell dealer and order some footpegs for a Lightning. They have an inch drop and should fit the factory Suzuki peg mounts no problem.

They used to be cheap as chips too.

A Buell Dealer ?

Thanks but, not sure if I'll have any luck with finding one these days, thanks anyway....
F5 Dave
21st February 2011, 15:21
They stopped production of new bikes, were selling off stock & were supplying parts for another 5 or 10 years. harley hasn't gone under, they just stopped that side to concentrate on, well , whatever it is that they do. Can't say that you'd get a better answer than WTs. Almost like he'd know about that sort of stuff having worked in a Suzi/Harley shop.

You can get an engineer to make up an adapter plate with mixed asthetics & cost outcomes, or you could order some adjustable footrest hanger combos of which you will find a multitude in the states of varied quality, fit, but that won't be a cheap option.
HenryDorsetCase
21st February 2011, 15:55
Steve Bridge at F1 Eng would also be one who comes to mind.
slofox
21st February 2011, 16:05
A Buell Dealer ?

Thanks but, not sure if I'll have any luck with finding one these days, thanks anyway....

You might try Road and Sport Motorcycles in The Tron...they did Buells for a bit and still do Charley Fergusons. 07 958 1400
Crasherfromwayback
21st February 2011, 16:13
Go to a Buell dealer and order some footpegs for a Lightning. They have an inch drop and should fit the factory Suzuki peg mounts no problem.

They used to be cheap as chips too.


A Buell Dealer ?

Thanks but, not sure if I'll have any luck with finding one these days, thanks anyway....

As WT says, Buell pegs will drop you approx 1". You can use XB12SS or XB12XT pegs if you want something wider. The pins are the right size, but you need to have the peg shaved about 1mm thinner where they mount. They're about $28.00 ea. Buell parts will be no problem for the next 9 odd years! Feel free to pm me if you want me to sort some out for you.

Pete