CBR1000RR wiring for instrument gauges

[hardhats]

Anyone come across a wiring diagram for the 04-05 CBR1000RR with the HISS system? I'm trying to repair the connector for the back of the instrument gauges.
The only diagrams I've found so far are US spec ones (no HISS). My bike has an extra wire (White/red) going to the instrument panel that isn't shown on any of these...

Alternatively, if anyone has an '04 or '05 blade and wouldn't mind me taking a peek at the wires going into the back of the gauges (or could take a couple photos) that would also be great.

[hardhats]

Found where the White/Red wire goes by trial and error: in the single space between the other wires in the "top" row of the connector (I think - will update if this turns out to be wrong).

I put all the other wires in the same positions as the US wiring diagram and it all seems to work ok. Not sure if I have the two Brown/White wires in the same positions they were originally, but they are both +12V with ignition on (and are actually connected to each other anyway) so it doesn't really matter.


Also worth mentioning: make sure the Bank Angle Sensor is mounted the right way up (there's an arrow on it) or the fuel pump won't switch on. Don't trust that the wrecker you bought the parts from has mounted it correctly either...