Ignition coils?

[Slavvy]

One of my ignition coils has kicked the bucket. Anyone know where I would get replacement items? I'm certain that either model gsx-r250, gsx-f and possibly some other suzuki 250's have coils that would work.

[Supertwin Don]

Pretty much any appropriate voltage coil will "work" providing it has the same electrical spec as the original, the trick is to get something that has the right connectors !
I'm using CBR600 "stick" coils as replacements for the stock Honda VTR units on my drag bike - just had to modify the connectors.

[ducatilover]

What's the coil resistance meant to be? I have some ZZR600/400 ones lying around that work.

[Slavvy]

2-4 ohms primary, 36-56 K-ohms secondary.

[ducatilover]

What kind of connectors does it use and how are the leads fitted?

[Slavvy]

Each coil has two male spade terminals as the +ve and -ve. The leads are part of the coil and not disconnectable.

[Henk]

You could try these

http://www.trademe.co.nz/Browse/Listing.aspx?id=387754435

[Slavvy]

Brilliant! Thanks a lot, I checked trademe regularly and don't know how I missed those! Hopefully bike will be running on 4 cyls again shortly :D

[imdying]

The leads are part of the coil and not disconnectable.Pull harder :yes: (little self tapper thing down the bottom of the hole)

[Slavvy]

Pull harder :yes: (little self tapper thing down the bottom of the hole)

Is this at the coil end or at the plug cap end?

[imdying]

Is this at the coil end or at the plug cap end?Coil end, always use a new plug cap. Have a look on some of the grey import forums, see if you can find a guide.