Jardine muffler reseller in NZ?

[tel]

Can someone help me for who to contact in NZ for Jardine mufflers
Looking for one for a Buell XB9R - the stock standard one requires replacement, or repair
A check on google has Custom Sports Bike NZ, but there is nil contact details provided on there web site

cheers

tm

[Devil]

Sorry, not aware of a reseller. I bought my last Jardine muffler from the states.
Be aware though that Jardine + Buell = loud. Almost unpleasantly loud without the baffle.

[tel]

okay thanks for the feedback, I will get the baffle plug with it

Are you happy with the exhaust - the buell muffler "shootout" (www.americansportbike.com/Exhaust_Shootout.html) test gave them a good write up in terms of reducing the drop in torque between 3-4.2k rpm, also look to be a bit better at top end over stock standard.

[nodrog]

I hope it lasts longer than the one that was on the missus' ER6, the packing burnt out and blew apart in less than 1000 k's.

[tel]

Which one did you buy, alloy or stainless steel one?

How hard would it be for a muffler shop to make a replica without stuffing up the exhaust dynamics that the Jardine is trying to optimise. I guess if it was easy, then everyone would be making there own

[bogan]

Which one did you buy, alloy or stainless steel one?

How hard would it be for a muffler shop to make a replica without stuffing up the exhaust dynamics that the Jardine is trying to optimise. I guess if it was easy, then everyone would be making there own

Who says we arent? :shifty: It's a bit tricky and requires decent kit to get the welds sorted, and looking nice, so counts out most people's DIY. Neptune down in wellington do nice work, they may be able to sort you out.

[tel]

hey thanks bogan, I will chase up them up

[ajturbo]

what i did with mine that blew a hole was to rush off to a sheet mettle workshop and asked them nicely to make me a new sleeve.. cost me $55.. all stainless.. then revited it back together with new baffle mat... cost of mat was around $35....:Punk:

[Morepower]

Can someone help me for who to contact in NZ for Jardine mufflers
Looking for one for a Buell XB9R - the stock standard one requires replacement, or repair
A check on google has Custom Sports Bike NZ, but there is nil contact details provided on there web site

cheers

tm

Check out one of these . The Jardine does not really suit the Buell that well. This will be less $ , Kiwi made , real nice tone but not ungodly loud . Good build quality too. Google Adrenalin R .

<a href="http://s300.photobucket.com/albums/nn26/KiwiTLS/?action=view&amp;current=DSCF1006.jpg" target="_blank"><img src="http://i300.photobucket.com/albums/nn26/KiwiTLS/DSCF1006.jpg" border="0" alt="Photobucket"></a>

[skippa1]

Check out one of these . The Jardine does not really suit the Buell that well. This will be less $ , Kiwi made , real nice tone but not ungodly loud . Good build quality too. Google Adrenalin R .



Nice can looks well made

[PuppetMaster]

Like you I tried to find a re-seller, but as far as I can tell there isn't one. Wellington Motorcycles are sorting mine out. Costs a small fortune but should be worth it.

[Drogen Omen]

any Buell riders i havent seen or met on here feel free to join us on Kiwi Buell Riders (https://www.facebook.com/groups/125928100845079/) facebook page

[AllanB]

Try Denniskirk.com They sell international and stock Jardine.

As do Starcycle.com

[Drogen Omen]

try Dean Adams Designs (used to be Keda Design)

http://www.deanadamsdesigns.com/

best Buell Exhaust on the market im my opinion only other one that comes close it the Torque Hammer from www.twinmotorcycles.com

Desn Adams exhaust
http://www.deanadamsdesigns.com/online/templatemedia/all_lang/resources/_wsb_703x523_rtxb3.JPG

Torque Hammer
http://www.badweatherbikers.com/buell/messages/32777/656450.jpg

[tel]

try Dean Adams Designs (used to be Keda Design)

http://www.deanadamsdesigns.com/

best Buell Exhaust on the market im my opinion only other one that comes close it the Torque Hammer from www.twinmotorcycles.com

Desn Adams exhaust
http://www.deanadamsdesigns.com/online/templatemedia/all_lang/resources/_wsb_703x523_rtxb3.JPG

Torque Hammer
http://www.badweatherbikers.com/buell/messages/32777/656450.jpg

cheers, thanks for the late feedback, i ended up having an exhaust specialist cut open the XB9 muffler. It had already been modified by an earlier owner, and had been modified with a straight through perforated pipe packed with the exhaust packing. So it was a simple weld and repack and weld the outer casing again. cheap outcome
tm

[Drogen Omen]

that's great mate.

that pretty much what i did also.

[Scouse]

I brought a stainless drummer in from USA also bought the pre programed Drummer ECU from EBR.

[Drogen Omen]

I brought a stainless drummer in from USA also bought the pre programed Drummer ECU from EBR.

Drummer you say...

is it the Drummer SS? you near Wellington?

join us on Facebook mate: Kiwi Buell Riders