Log in

View Full Version : Not motorbike related BUT



scumdog
10th September 2011, 22:40
On retrdme is a Em Ecks Fyve with 10" wide rims (250emem for those young bastards).

And it has 1-fuckin'95 tyres fitted.:shit:

SIx inch rims would be any amount wide enough for 195s but freakin' 10's???

And they're selling it with this clusterfuck set-up.

nallac
10th September 2011, 22:43
what the fuck are you looking at gay cars for?....

scumdog
10th September 2011, 22:46
what the fuck are you looking at gay cars for?....

I thought I might find you there cheese-dick..

But seriously, I was scrolling through 'convertibles' and saw that creation.:blink:

Motu
10th September 2011, 22:50
Gets the WoF with standard rims,and then fits those ilegal and unsafe wheels on to sell it - with WoF.

Madness
10th September 2011, 23:03
http://www.trademe.co.nz/motors/used-cars/mazda/mx5/auction-404185922.htm

I saw a people mover with a bright green version of the same wheels on the Southern Motorway last week. Must be the next big thing for fucktards.

http://images.trademe.co.nz/photoserver/53/185762553_full.jpg

scumdog
10th September 2011, 23:13
http://www.trademe.co.nz/motors/used-cars/mazda/mx5/auction-404185922.htm

I saw a people mover with a bright green version of the same wheels on the Southern Motorway last week. Must be the next big thing for fucktards.

http://images.trademe.co.nz/photoserver/53/185762553_full.jpg

That's the one - at least you won't scuff the side-walls on the kerbs so easily...

FJRider
10th September 2011, 23:17
That's the one - at least you won't scuff the side-walls on the kerbs so easily...

More likely to break the bead on the kerb though ... :facepalm:

scumdog
10th September 2011, 23:20
More likely to break the bead on the kerb though ... :facepalm:


Reminds me of back in the day when you could make 7" X 13" rims for your Mk2 Zephyr.

But the only tyres were 175X13s.:shutup:

FJRider
10th September 2011, 23:23
Reminds me of back in the day when you could make 7" X 13" rims for your Mk2 Zephyr.

But the only tyres were 175X13s.:shutup:

and re-treads all round ... :facepalm:

Oblivion
11th September 2011, 00:25
Those are the ugliest rims I have ever seen so far. :shutup:

What are some people thinking when they do this???

idb
11th September 2011, 01:19
That shade of blue just doesn't look right.

\m/
11th September 2011, 02:39
Stretched sidewalls can look good with the right wheels, which this car doesn't have.

Wannabiker
11th September 2011, 06:59
Haven't seen rims that ugly for 20 years or more... looks like the Ford engine blue colour of my old Falcon500 engine.

Its hideous!

DEATH_INC.
11th September 2011, 09:35
We see this shit all the time (being in the mag wheel game). The idiots don't realise that the tyre manufacturers spend millions (well maybe not the chinese one's) on developing these things to work on specific size rims. We've seen quite a few that have popped off for no reason, in fact we had one do it on a customers car driving it around the building just the other day :facepalm:. I also know that Mad Mike occasionally has the same problem on his rotor drift car (Which is where most of these idiots get the idea from- He's good mates with one of my workmates). They should be illegal. :yes:

Laava
11th September 2011, 09:42
Must be a bugger to get the beads to seat when you fit the tyres? You would need a massive volume of air or do they just put inner tubes in?

Kickaha
11th September 2011, 10:29
Must be a bugger to get the beads to seat when you fit the tyres? You would need a massive volume of air or do they just put inner tubes in?

They can be quite poxy depending on the rim, we use a bead cheater which dumps a massive amount of air into the tyre in one hit from the edge of the rim rather than through the valve

Motu
11th September 2011, 10:31
They should be illegal.

They are,we failed one last week for stretched tyres.

Kickaha
11th September 2011, 10:35
They are,we failed one last week for stretched tyres.

What is the regulation that they fail on?

Motu
11th September 2011, 11:41
''are an appropriate selection for rim width,''

bogan
11th September 2011, 12:17
and chances are the lowering is just as shit, so he is only driving on half his superwide contact patch anyway :facepalm: Was yarning to a guy about car suspension the other day, that shit is complicated as, scrub, roll center etc, not something for amateurs, much less idiots.

Oblivion
11th September 2011, 12:23
and chances are the lowering is just as shit, so he is only driving on half his superwide contact patch anyway :facepalm: Was yarning to a guy about car suspension the other day, that shit is complicated as, scrub, roll center etc, not something for amateurs, much less idiots.

But how will dey afford teh monei for teh modifkations den? U cant do much being on da dole. Shit just gets 2 expensive bro. I did a mean spring chop last week tho, sits 5mm off da ground now. :facepalm::facepalm:

scumdog
11th September 2011, 12:33
They are,we failed one last week for stretched tyres.

GOOD!

Cool is good until it's dangerous.

Latte
11th September 2011, 13:19
Must be a bugger to get the beads to seat when you fit the tyres? You would need a massive volume of air or do they just put inner tubes in?


http://www.youtube.com/watch?v=n-LnkEUAImU

Eyebrows optional

Edbear
11th September 2011, 18:04
Thisn is what an MX5 should look like...

scumdog
11th September 2011, 18:22
Stretched sidewalls can look good with the right wheels, which this car doesn't have.

I've seen the reverse back in the 70's

A PA Vauxhall with stock 4.5" rims.

And 215 X 13" Cavalinnos squished onto them.:facepalm:

nudemetalz
12th September 2011, 10:25
Thisn is what an MX5 should look like...

and then get driven like this...


http://www.youtube.com/watch?v=6em1G-Gxhpo

:facepalm::doh:

Edbear
12th September 2011, 10:49
and then get driven like this...


http://www.youtube.com/watch?v=6em1G-Gxhpo

:facepalm::doh:

LOL!!!! Nah, I'm much mre careful where and when... 'Sides, I'd hate to think how fast I'd have to be going to lose it and drift the rear, this thing sticks like the proverbial on the tyres it has. Handles like a dream! :sunny:

HenryDorsetCase
12th September 2011, 14:13
that stretching a tyre onto a rim is about the stupidest thing Ive ever seen.

I despair for humanity some days.

Do drift car people actually do that as well? if so, why?

(by the way, drifting is not motorport. apart frombeing incredibly lame, if you get "Style points" its not racing.) Sure the guys have got decent car control skills, but if you want to get sideways, go rallying.

nudemetalz
12th September 2011, 14:47
(by the way, drifting is not motorport. apart frombeing incredibly lame, if you get "Style points" its not racing.) Sure the guys have got decent car control skills, but if you want to get sideways, go rallying.

Fast forward to 0.45 !!! Now THAT is a drift !!


http://www.youtube.com/watch?v=K5oRAVm_DDE

Daffyd
12th September 2011, 15:05
and then get driven like this...


http://www.youtube.com/watch?v=6em1G-Gxhpo

:facepalm::doh:

And the CHP performed a U-turn on yellow lines, no?

Daffyd
12th September 2011, 15:07
Fast forward to 0.45 !!! Now THAT is a drift !!


http://www.youtube.com/watch?v=K5oRAVm_DDE

Now that was what I call a drift.