Looking for a burn out location close to Wellington.

[S1spider]

Hi, would anyone know of a location close to Wellington to practise tyre burn outs, the neighbours did'nt mind the first hour then the love faded, fair enough.

So I'm on the look out for another location, I have a concrete burn out pad and I am using a GSX 400.

What I need is legitimate permission/access to flat ground, grass is OK with some distance from joe public is important, burn out time would be between 10 am through to about midday either saturday or on a sunday weather dependent, I plan on repeating this practise over a number of months.

Sneaking down the back roads did cross my mind, but I'm trialling a new concept and require time to work through issues, hence the 2 hour burn time.

[blackdog]

Todd park carpark?

(although I've never done a burnout up there)

[ajturbo]

think you best get hold of the slipway ...

http://www.hccc.org.nz/webpage/21

[koba]

Maybe talk to the owners of the slipway?

The quieter it is less hassles you will have.

[S1spider]

Thanks for the heads up on the slipway, I will give them a call cheers.

[S1spider]

Had a chat with Ben from slipway, burn out testing should be ok at the slipway, as long as I can comply with Resource Consent noise level, just have to wait until the end of January 2012 to find out.

Location: Slipway, Brooklyn

"Unfortunately due to resource consent issues, all events at the Slipway Circuit are postponed until further notice."

So I will continue the search, just in case the slipway............ slip slides away.

[Katman]

How much practise does one need for doing burnouts?

:scratch:

[Jantar]

How much practise does one need for doing burnouts?

:scratch:

How can anyone afford the tyres for 2 hr burnouts?

[roadracingoldfart]

How can anyone afford the tyres for 2 hr burnouts?

Its not so much a " Burn out " its more akin to a " Smoulder Off " so there is more time required.

[HenryDorsetCase]

Cambrigge Terrace and Adelaide Road, then drifting round the Basin Reserve.

[mossy1200]

:yawn: why?

2hrs. Are you trying to burnout the tyre or spank it till the rims are 17inch for better tyre selection?

[Mooch]

Its not so much a " Burn out " its more akin to a " Smoulder Off " so there is more time required.

Whats the point ? Watching the wife knitting sounds more interesting !

Not going to be great for the engine either with bugger all airflow.

[tigertim20]

Hi, would anyone know of a location close to Wellington to practise tyre burn outs, the neighbours did'nt mind the first hour then the love faded, fair enough.

So I'm on the look out for another location, I have a concrete burn out pad and I am using a GSX 400.

What I need is legitimate permission/access to flat ground, grass is OK with some distance from joe public is important, burn out time would be between 10 am through to about midday either saturday or on a sunday weather dependent, I plan on repeating this practise over a number of months.

Sneaking down the back roads did cross my mind, but I'm trialling a new concept and require time to work through issues, hence the 2 hour burn time.

as opposed to what, practicing burning out the clutch?

[ducatilover]

Has nobody told you videos are mandatory? Beat the shit out of the GSX till it cries oil and sneezes rods.

[tigertim20]

Has nobody told you videos are mandatory? Beat the shit out of the GSX till it cries oil and sneezes rods.

Fair enough, heres the last one i did
Twas only a honda, so i raped it.


http://www.youtube.com/watch?v=D63y6dzJYzY

[ducatilover]

Fair enough, heres the last one i did
Twas only a honda, so i raped it.



That deserves a beer!

[tigertim20]

That deserves a beer!

better. Got a hundred bucks for winning the burnout comp

[ducatilover]

better. Got a hundred bucks for winning the burnout comp

Was it your CBR? If not, double win!

[tigertim20]

Was it your CBR? If not, double win!

haha yeah it was mine