View Full Version : At last, it's here
pete-blen
29th November 2011, 15:51
A good day...
The new toy finaly got here...
I managed to keep it togeather long
enough to put 20k on it... Being a short
leg version .. I desided I need to make a
set of lowering links... looks if I drop it 50mm
and build a 2 into 1 high pipe the ground
clearance will stay the same...
They are the first projects...
So wheres the ride this week end :woohoo:
unstuck
29th November 2011, 15:52
NICE.:yes:
Night Falcon
29th November 2011, 18:38
... looks if I drop it 50mm
and build a 2 into 1 high pipe the ground
clearance will stay the same...
They are the first projects...
looks real swell, how about "Bluey" for new name? while where at it your 2nd project might be to look at protecting those nice looking pipes :corn:
Eddieb
29th November 2011, 18:48
Noice, what does it sound like with those pipes?
pete-blen
29th November 2011, 19:33
Noice, what does it sound like with those pipes?
For after market pipes.. its silent... They are factory Yamaha pipes..
or made for them..... GY-TR ... " Genuine Yamaha Technology Racing"..
Its also got K&N filters internal & external... the right side of the air
box is replaced with a K&N filter sreen....hope its high enough for deep rivers..
No fuel tap .. just a fuel warnning light..
But theres a lot of very exspensive brakeable looking bits on it...
Monstaman
29th November 2011, 20:01
But theres a lot of very exspensive brakeable looking bits on it...
Now the fun begins, nice lookin machine Pete
With your engineering talent she will ready to race in no time I am sure ... make a noice cover for that stickie outie hose too on the right front.
vifferman
30th November 2011, 10:28
It's disgustingly clean, innit?
Tigadee
30th November 2011, 14:33
That's one beautiful beast!
buggsubique
30th November 2011, 17:23
Mate, well done on a nice looking bike! I'm bringing my Africa down for Xmas and New Year - I'd be keen for a ride up Mt Pat if you're interested & around? Coming over on Weds night before Xmas and heading home ~6 Jan.
pete-blen
30th November 2011, 17:43
Mate, well done on a nice looking bike! I'm bringing my Africa down for Xmas and New Year - I'd be keen for a ride up Mt Pat if you're interested & around? Coming over on Weds night before Xmas and heading home ~6 Jan.
yer no pobs..I got no plans on going anywhere ... works seen to that..
Moleworth / Rainbow the useal stuff..
buggsubique
30th November 2011, 18:10
yer no pobs..I got no plans on going anywhere ... works seen to that..
Moleworth / Rainbow the useal stuff..
Taking the Mrs to Hanmer for a couple of nights so I'll be doing the big loop then. Could be keen on the Branch if water's low enuff.
Frodo
1st December 2011, 20:37
With your engineering talent she will ready to race in no time I am sure ... make a noice cover for that stickie outie hose too on the right front.
Water pump is definitely vulnerable. Givi makes nice engine bars that protect cases and the water pump. Off-the-Road makes a smaller unit that just protects the water pump.
You might want to consider a PowerCommander to improve the fuelling.
pete-blen
1st December 2011, 21:05
Water pump is definitely vulnerable. Givi makes nice engine bars that protect cases and the water pump. Off-the-Road makes a smaller unit that just protects the water pump.
You might want to consider a PowerCommander to improve the fuelling.
Case bars & skid plate are on my projects list...Got to get the pipes out of the way first...
I have built a set of lowering links.. Now 50mm lower..had to shorten the side stand..kept
trying to fall over...
As for the power commander... I found this thing tucked away under the seat...
http://www.kiwibiker.co.nz/forums/showthread.php/144529-Who-made-this?p=1130206485#post1130206485
X.T.C
2nd December 2011, 05:31
Case bars & skid plate are on my projects list...Got to get the pipes out of the way first...
I have built a set of lowering links.. Now 50mm lower..had to shorten the side stand..kept
trying to fall over...
As for the power commander... I found this thing tucked away under the seat...
http://www.kiwibiker.co.nz/forums/showthread.php/144529-Who-made-this?p=1130206485#post1130206485
Nice Bike mate.. but I'm bias because it was my old bike :yes:.. I've just give Ben, previous owner some info on that knob under the seat.. check out the link below for more details.. it's called the 'Kevs fuel mod' and basically tricks the ecu into thinking the air temp is slightly cooler then it is, thus enriching the fuel air mix.. there are some vids on Youtube that show you (link below).. You can enter diag mode on the ecu to adjust it.. it was set about 8 degree cooler then standard.. by the way that surge you might feel at low speed is a curse with those machines.. I had hoped the slip ons and fuel mod would smooth it out more...
http://www.xt660.com/site/node/136
Enjoy the ride.. i pretty much started it's likd going up and down the tar sealed motorway between Upper Hutt and Wellington.
Cheers
pete-blen
2nd December 2011, 06:33
Nice Bike mate.. but I'm bias because it was my old bike :yes:.. I've just give Ben, previous owner some info on that knob under the seat.. check out the link below for more details.. it's called the 'Kevs fuel mod' and basically tricks the ecu into thinking the air temp is slightly cooler then it is, thus enriching the fuel air mix.. there are some vids on Youtube that show you (link below).. You can enter diag mode on the ecu to adjust it.. it was set about 8 degree cooler then standard.. by the way that surge you might feel at low speed is a curse with those machines.. I had hoped the slip ons and fuel mod would smooth it out more...
http://www.xt660.com/site/node/136
Enjoy the ride.. i pretty much started it's likd going up and down the tar sealed motorway between Upper Hutt and Wellington.
Cheers
Hi..
Thanks...
Now know it isn't a back shed job...
I can live with the sergeing ..not used for commuting..
It goes well ..apart from the vibration though the pegs.
A good screen a must at road speeds...
pete-blen
6th December 2011, 07:13
let the build/exspence begin..
got a screen & metal mule high
2 into 1 exhaust system on the way..
trying to buy a 22lt Gili-moto tank..
but I can't read Brizilin...:(
Crim
6th December 2011, 15:29
but I can't read Brizilin...:(
Don't think you are supposed to read Brizilin - I think theys just for looking at:shifty:
Eddieb
6th December 2011, 16:22
There's a Sarf Afrekaan outfit that does big tanks for those too and a bit of other tasty bling.
Edit: http://www.off-the-road.de
How far do you want to go?
http://www.off-the-road.de/out/pictures/2/vorbau_xt-660-2_web_05.jpg
pete-blen
6th December 2011, 16:56
There's a Sarf Afrekaan outfit that does big tanks for those too and a bit of other tasty bling.
Edit: http://www.off-the-road.de
How far do you want to go?
http://www.off-the-road.de/out/pictures/2/vorbau_xt-660-2_web_05.jpg
Don't post pics like that....
I can waist money with out any help...:(
Edit >>>>
Can the tank... just done a mileage check.. 23/24km per lt = 350km from the tank...
pete-blen
7th December 2011, 16:00
This thingy turned up...
The poor mans fuel commander option...:facepalm:
Eddieb
9th December 2011, 15:56
You're selling those nice pipes off it?
pete-blen
9th December 2011, 18:17
You're selling those nice pipes off it?
I am....
I have a Metal mule 2 into 1 high system to go on...
Eddieb
9th December 2011, 18:39
I am....
I have a Metal mule 2 into 1 high system to go on...
Thats an acceptable excuse.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.