PDA

View Full Version : Stainless steel valves?



vr4king
19th February 2012, 17:29
Well I'm sure my intakes in my crf have gone south again now im thinking s/s might be the way to go
Anyone have any input into using them I see motoxparts has faction kits in thinking i might takle this job myself as last time i got stung the best part of $600 to put Ti ones back in there

Or do i need special tools to do the job?
What about the valve seats do they need to cut etc?

scott411
19th February 2012, 17:33
Well I'm sure my intakes in my crf have gone south again now im thinking s/s might be the way to go
Anyone have any input into using them I see motoxparts has faction kits in thinking i might takle this job myself as last time i got stung the best part of $600 to put Ti ones back in there

Or do i need special tools to do the job?
What about the valve seats do they need to cut etc?

if you go for stainless valves make sure the valve springs are right for them as well, i have seen issues arrise when they are not matched

vr4king
19th February 2012, 17:34
Yeah the kit says its got springs in it

Unless you can offer an alternitive scott?
You know anything about getting the seats machined etc is this a must do thing?

scott411
19th February 2012, 17:39
we do seat them, if the head needs it we get a reconditioner to cut them, the fraction stuff seems to be pretty good,

vr4king
21st February 2012, 19:50
Well I pulled the head off tonight............Some strange findings

The last time I took it to someone to get the intake valves done the left intake had zero'ed,Now looking at the head the left intake has ALOT less carbon buldup than the other 3

Now the right intake has zero'ed
Would it be right of me to be suspisious that the guy only replaced the one that had zero'ed?

I was thinking that the carbon buildup would be fairly much the same if he had done both?

Oh and $600 seems abit steap to just do ONE valve..............

Thinking i got ripped off now

scott411
21st February 2012, 20:11
did the bill show both valves?, not sure what honda valves go at so can not comment,