Wheelie to the face

[Fast Eddie]

haha.. ill stop posting videos now but seriously if your as bored as I am on a saturday night (due to dunedin lacking 25mm sockets which I need, curse you) check out bikerpunks.com website for hours of entertainment

how about a hug from a GSXR?

http://bikerpunks.com/mediaviewer/3286/gsxr-wheelie-to-the-face.html

[tigertim20]

ouchies.
I can go see if I have a 25 socket you can borrow if you want, or you gonna just buy one tomorrow?

[tigertim20]

also DM said he has a reg/rec from a hyo 250, its yours if you want it - come pick her up.

[Fast Eddie]

ouchies.
I can go see if I have a 25 socket you can borrow if you want, or you gonna just buy one tomorrow?

chur bro, nah tried to buy one in town yesterday and mitre 10, bunnings, repco, supercheap, BNT and some other place didnt have any 25mm sockets instock. ordered one from my snap on rep but will take a week or so to get here.

Keeeen as to borrow one :D

[Fast Eddie]

also DM said he has a reg/rec from a hyo 250, its yours if you want it - come pick her up.

cooould be keen, Hayd3n brought one over and we plugged it in and no change to the bike so have made the assumption its the stator thats shagged. ordered one off ebay ex china.. will see how that goes :S

but wouldnt say no to a free part, guessing id have to wire it up which im not so keen on. hate electrics shit. its witchcraft I tells ya

[tigertim20]

cooould be keen, Hayd3n brought one over and we plugged it in and no change to the bike so have made the assumption its the stator thats shagged. ordered one off ebay ex china.. will see how that goes :S

but wouldnt say no to a free part, guessing id have to wire it up which im not so keen on. hate electrics shit. its witchcraft I tells ya

yeah charging systems can be a right cunt. When DMs charging system went kaput, I did some googling, and found a place in the usa that does really good aftermarket stators for fuckall, we bought one for a kwak, and mated it to an 07 R1 mosfet r/r and I hooked it all up together, had no issues since.

what did the stator cost you?

[tigertim20]

had a look, closest I have is a 1 inch socket, which is 25.4mm - will be close enough to do what you want if you wanna come and grab it some time?

[Fast Eddie]

yeah charging systems can be a right cunt. When DMs charging system went kaput, I did some googling, and found a place in the usa that does really good aftermarket stators for fuckall, we bought one for a kwak, and mated it to an 07 R1 mosfet r/r and I hooked it all up together, had no issues since.

what did the stator cost you?

15 bucks US greenbacks plus 10 postage..

hoping the reg/rec is still ok as its proving hard to find a direct replacement for the gn250, although there are ones online ebay for cheap that look the same but the fella is adament it will not work on my GN, only got for the 80's - 90's ones.. looks the same to me but meh. he almost guaranteed me they wouldnt work lol

[Fast Eddie]

had a look, closest I have is a 1 inch socket, which is 25.4mm - will be close enough to do what you want if you wanna come and grab it some time?

yea recon? that .4 is prob enough to strip the nut.. lol

the rear axle is done up pretty tight, tried with crescent etc and it wasn't budging. might come grab it tomorrow for a quick go tho, can't hurt

[Fast Eddie]

oh if the 15 buck stator doesnt work or is shit, I'd be very keen to copy ur solution, gettin the stator and mosfet reg/rec and having u show me the way for some beer or something. would prob do the fireblade conversion to mosfet at the same time too since im just running a finned old diode reg/rec on that thing too.

[tigertim20]

oh if the 15 buck stator doesnt work or is shit, I'd be very keen to copy ur solution, gettin the stator and mosfet reg/rec and having u show me the way for some beer or something. would prob do the fireblade conversion to mosfet at the same time too since im just running a finned old diode reg/rec on that thing too.

yeah, wasnt a big job, ya need the parts, soldering iron, and thats about it. took an hour or two (I was drinking while doing it haha)

Hayden told me about what you got told about your RR for the ginny - sounds like BS to me, Ive seen all kinds of rr's thrown on bikes that have worked just fine - I like the idea of replacing both, because in my experience, either one can fuck the other. the offer is there if you want the Hyo rr, i'll get DM to put it aside before he goes to work if you wanna pick it up.

the .4 Id think would be ok, I assume you doused it with wd40 or similar?
I used an imperial cosket that has .5mm too big to get the nut off my top triple clamp a while ago and it was fine, didnt slip and she was over tourqued by quite a way

[Fast Eddie]

sweeet, yea bro bang it aside, if I dont use it I'll return it to him or whatever :)

I'll come pay yas a visit tomorrow if your free or somethin.

yea its had a bit of a WD40 spraying and have left it for a few days now so it should crack off with a good socket. the crescent and spanner wasnt really useful because the nut is slightly recessed as well so couldnt get a good purchase. im sure the 1inch will bang her off.

cheers for the help man! tis much appreciated. will send ya a PM later or if u can be bothered send us a PM with ur celly number. Thought I had it but maybe not

[tigertim20]

sweeet, yea bro bang it aside, if I dont use it I'll return it to him or whatever :)

I'll come pay yas a visit tomorrow if your free or somethin.

yea its had a bit of a WD40 spraying and have left it for a few days now so it should crack off with a good socket. the crescent and spanner wasnt really useful because the nut is slightly recessed as well so couldnt get a good purchase. im sure the 1inch will bang her off.

cheers for the help man! tis much appreciated. will send ya a PM later or if u can be bothered send us a PM with ur celly number. Thought I had it but maybe not

will do................................

[DrunkenMistake]

Didnt have a 25mm, goes up to 24 then goes up to 30 and works its way up dumb ass set,
Anyways I have the r/r and a plug you can wire up that plugs into it for you, Ill leave it here for Tim, unless your in the south dunedin/Andy bay area and I can take it to work

[hayd3n]

1 inch is the way to go my guess is the rear nut shouldent be to uber tight
.4 of a mm is like fukall

[Fast Eddie]

Didnt have a 25mm, goes up to 24 then goes up to 30 and works its way up dumb ass set,
Anyways I have the r/r and a plug you can wire up that plugs into it for you, Ill leave it here for Tim, unless your in the south dunedin/Andy bay area and I can take it to work

yea I seem to have bought every socket except 25 and 26mm over the years. Guess I just never came across those size nuts til now (hold the gay jokes I came up with a bunch myself)

[DrunkenMistake]

yea I seem to have bought every socket except 25 and 26mm over the years. Guess I just never came across those size nuts til now (hold the gay jokes I came up with a bunch myself)

Anyway did you wanna get it from Tim? Or come by my work and grab it?

[Fast Eddie]

I'll grab it off Tim was gonna borrow his 1 inch socket tmoro too.

why are you workin on a sunday, God would not be impressed

[DrunkenMistake]

I'll grab it off Tim was gonna borrow his 1 inch socket tmoro too.

why are you workin on a sunday, God would not be impressed

God doesnt like me much haha,

I work Thursdays to Mondays fml.. ill leave it with Tim!

[Fast Eddie]

God doesnt like me much haha,

I work Thursdays to Mondays fml.. ill leave it with Tim!

Champion :yes:

I have some used condoms and half a bag of bark while we are swapping stuff we don't need..

interested?

[tigertim20]

Champion :yes:

I have some used condoms and half a bag of bark while we are swapping stuff we don't need..

interested?

How about i just give you DM, we dont need him!
I'll even chuck in his missus - in a couple months when she pops youll have your own little gofer slave to keep the shed tidy, as well as a house maid.
Dunno what youll do with DM, pair of concrete boots and make a boat anchor maybe?

[Fast Eddie]

How about i just give you DM, we dont need him!
I'll even chuck in his missus - in a couple months when she pops youll have your own little gofer slave to keep the shed tidy, as well as a house maid.
Dunno what youll do with DM, pair of concrete boots and make a boat anchor maybe?

haha, I'll take him. dont have a boat but the dog needs food (DM in the freezer should last a bit) and would love a maid and slave :) cheers!