Help needed with fitting instructions

[5150]

How do I mount this sucker onto my Hornet? It is purely for self defence reasons against rouge cagers and odd lycra jokey. :eek:

Any help appreciated :devil2:

[oneofsix]

That is one hell of a reverse gear for a hornet, given what it does to an A10. :eek:

[gijoe1313]

Probably going to need the sidecar and a trailer for the bin of ammunition you will need! Enough for a total firing time of 3 seconds!

[Swoop]

I hope you have alredy booked in with Robert Taylor?

You will certainly be needing suspension alterations after fitting that.

[nathanwhite]

http://db3.stb.s-msn.com/i/AB/88B1F9DBB49A2B12DA529E98AF33EB.jpg

Chop the barrel to 1/3 the length and mount under the nose like so.

[5150]

specs say it fires 4200 rounds per minute. Enough to cut a car in half I say

[Haggis2]

Race tape?

[5150]

This?

http://www.youtube.com/watch?v=1Oc-xbpy-OI



Or should I go for this "more compact" version? :devil2:

http://www.youtube.com/watch?v=pyXdB_AYiDs

[nudemetalz]

With the A-10 it is originally mounted to, they say they don't fire it any longer than 6 seconds,...any more than that, the gun produces enough recoil to stall the aircraft !! :eek:

[nathanwhite]

If you don't fancy the idea of a 6m anhiliator attached to your bike, why not the airsoft version?

http://goodairsoft.webs.com/photos/good-airsoft-guns/aeg_e1_minigun_s2%5B1%5D.jpg

Much smaller and still has a fair amount of power

http://www.youtube.com/watch?v=ZsfY_4vWN5A

[5150]

If you don't fancy the idea of a 6m anhiliator attached to your bike, why not the airsoft version?

Will it run off a 12volt? :confused:

[awa355]

Designed by NZ Minastery of De Fence,. This works. It self fired when I was trying for a front on photo. Note the almost lethal 60mm warhead. Can penetrate a tee shirt at 1/2 metre. This one I was able to adapt to my camera mount.

[5150]

Designed by NZ Minastery of De Fence,. This works. It self fired when I was trying for a front on photo. Note the almost lethal 60mm warhead. Can penetrate a tee shirt at 1/2 metre. This one I was able to adapt to my camera mount.

This will work with the lycra jokeys, but for the cagers you need something with a bit more punch. And that is where Gau-8 comes in nicely :)

[Usarka]

Ask Machete

http://actionfest.com/wp-content/uploads/2012/02/blog-machete-bike.jpg

[nathanwhite]

Will it run off a 12volt? :confused:

I believe it is powered by 12V actually. google it