T-Shirt

[wari]

Anyone out there know anything about the textile industry?

I was just thinking it might be good to get a T-shirt designed and made for members of this forum if they wanted it.

A bit of mechandise might help offset the cost of running this site which so far Spankme has been sponsoring and hosting .

I'm sure some of you guys have the talent to design something cool. Mind you it'd have to be a black T-shirt to get SpankMe to wear it.

[wari]

What a great idea for a Christmas present !!!

Next year maybe ...

[Gixxer]

sounds good, I just happen to know someone who designs and sells T-shirts, will check her out today.

[svenhanne]

one in XL please...thanks

[Cuban]

perhaps a collared short sleeve workshirt with kiwibiker on the arm or pocket?

[wari]

Any word gixxer on your friend the T-shirt lady ?

Also what do you reckon about Cubans suggestion of a collared shirt? Sounds good too , but wonder about the cost with the small quantities that would be involved.

[Will Beard]

:D great idea! how about a kiwi or silver fern thrown in somewhere , always looks good on black. xxl please to cover beer pot.

merry xmas all

:bigthumb: :beer:

regards the beard family.

[Gixxer]

Still waiting to hear from her.
she is in Queenstown at the moment

Cuban, do you mean like a pollo shirt or one of those work style shirts with all the old shell and petrol badges on them that you see at the markets?

the work style ones sounds good, both will a bit expensive, can still look into them.

[Gixxer]

who much do people want to pay for a t-shirt?

[Kiwi]

Nothing :D

I think 20 to 30 is OK

See ya in WANGANUI

Kai

and have a great Christmas

[Cuban]

yeah i was talking about the workshirt ones,
id be around the 30-50 mark probably

has anyone got any design ideas lined up?


happy new year all

[davidb5]

Saw a great Tee shirt pic in an old Performance Bike mag.

Rear view of biker in jeans cornering with the knee down (imagine the pipes, lean angle and fat rubber). Pic taken from close to the tarmac. The caption "Still wearing out the knees"



:calm:

[Gixxer]

do you still have the Pic?

[davidb5]

Had a quick look, but must have been before August 2000, that when last lot went to the 2nd hand book shop.

Suggest any similar pic can be adapted by an arty type to suit.



:brick:

[Cuban]

hey guys,
whats the story with those shirts?
did we get anywhere at all?!
i may have to go down south to pursue educational oppurtunities down there ( didnt make the grade in akl!). so itd be cool to get one before i head off to where running water is the height of civilisation (just kidding, any1 from the mainland).

tim

[Gixxer]

I have prices and narrowed it to one print shop, I have made some rough designs and trying to find a scanner.
If there is anyone good at art or good at doing pics on P.C's (P.C format vectorized EPS?) holla.

when I find a scanner I will put the pics I have done.
The guy at the print shop said they can fix it up etc, but it is like $50 p/h extra.

Cheers

Gixxer

[Skunk]

I MAY be able to help you there... (I'm in the prepress industry)

Depends what you got and if you can get it to me... :p

[bikerboy]

I've got a scanner and know someone who is great at computer graphics. I'm sure he can "fix it up" as a favor if there isn't too much involved. I'm in (herne bay) Auckland. :bigthumb:

[Gixxer]

Cheers Bikerboy, give us your number I will give you a call, I work in CBD, so can drop them off anytime.

Cheers

[bikerboy]

Great,
give me a ring on 021 680 088 to organize a time.:done:

[Gixxer]

I have found a scanner. remeber this is a rough sketch.

[Gixxer]

looks better on paper

[Cuban]

so hows it going guys?
whats the plan?
is it a touched up version of that sketch printed onto a shirt, or onto a patch, or is it still up in the air?
i think that if we were to say put the sketch on the back of a shirt (printed on) the it should be bold clean lines, and in an opposite colour to the shirt ( i.e. black shirt, white graphics)
And are we gonna have "kiwibiker" underneath the graphic, or something catchy and inevitably more try-hard like 'catch us if you can'?!!

Anyway,
thoughts to ponder

[p0stal]

Originally posted by Cuban
i think that if we were to say put the sketch on the back of a shirt (printed on) the it should be bold clean lines, and in an opposite colour to the shirt ( i.e. black shirt, white graphics)


Good point. I can simplify or styilize that sketch if you want, I've got CorelDraw, so exporting an EPS won't be a problem. If you want a hand with any of the design, just let me know. I'm new, I know, but I'd like to help any way I can. :D

[Gixxer]

now we are getting somewhere,

I told the dude from the print place it would be something like a white pic on black shirt, or vice versa depending on what everyone wants, bold lines is definatly the way to go.

I think if we can get a couple more ideas and pics we can do the vote thing.

p0stal, I do have one or 2 pics (hand drawn) which I can send you to do if your keen, kinda comic style stuff, have not worked out how to get them down to 800x600.

I thought of having "kiwibiker" or even "www.kiwibiker.dynu.com", above and below the pic in a banner style or around the pic in a circle with something like what cuban said would be good.

[p0stal]

Originally posted by Gixxer
I told the dude from the print place it would be something like a white pic on black shirt, or vice versa depending on what everyone wants, bold lines is definatly the way to go.

I think if we can get a couple more ideas and pics we can do the vote thing.

p0stal, I do have one or 2 pics (hand drawn) which I can send you to do if your keen, kinda comic style stuff, have not worked out how to get them down to 800x600.

I thought of having "kiwibiker" or even "www.kiwibiker.dynu.com", above and below the pic in a banner style or around the pic in a circle with something like what cuban said would be good.


Personally, I think white on black is better, black shirts just look better, especially if you're going for the work-shirt style, white gets dirty & marked too easily, & we want these to last, right? :D

Sure, Gixxer, send any images to blackcat@maxnet.co.nz, I'll have a go at converting them to a more delineated style, hell, I might even have a go at the one already there tomorrow. ;)

When you all decide what to use for the text, let me know & I'll incorporate it into the image.

[Skunk]

If that's what you're up too... that's too easy. I'm in the graphics and prepress industry and produce film for screen printers every day. If you run into trouble give me a yell.
:done:

(I have access to Photoshop, Illustrator, CorelDraw, Freehand, Quark, InDesign, Pagemaker and others, along with an imagesetter for the film output.)

[p0stal]

/bows to kiwizrx

"we're not worthy, we're not worthy!..." :D



Right, this is what I have so far, 1 color only, to keep the prices low. I've done 2 versions, I prefer the 1st one, but I gave the option anyway. The top pic in each image is for a white background, the bottom for a black BG.

Suggestions for improvement?

http://homepages.maxnet.co.nz/blackcat/BikeA-1.gif



http://homepages.maxnet.co.nz/blackcat/BikeA-2.gif

[wari]

Those are looking impressive ... i like the simple style !!

The top two are the options I like best and the T-shirt will have to be black to get SpankMe to wear it, after all he started this all off . Does it cost more to have different colour shirts ? I like the top pic slightly more though , so could it be in one of those jaggedy type thingies that you see in cartoons ... you know the ones ... like the KAPOW !!! of a batman punch , then you could have the white jaggedy thingie on a black t-shirt eh? Just a thought ?

Be good to see what it'll be like with some wording too .

Good on you fellas ... top work and all that.

[p0stal]

^
|| Good thinking, that man! :D

I replaced the starburst with a rounded box, & put the kiwibiker text in there, sorta like a road sign... It makes it look a lot more complete.

http://homepages.maxnet.co.nz/blackcat/BikeA-Sign.gif

[wari]

Good thinking there P0stal .. looking Kikass mate !!!

[wari]

The Road sign look ... can we add a roadsign colour too ... yellow, orange or red ?

[p0stal]

Sure, depending on what message you want to convey: Standard, Temporary, or Danger! :D

[Cuban]

That looks great postal,
i think only the one colour would be best, cost wise and i reckon it looks wicked simple.

awesome work postal, and gixxer for the original, i really like how it has come out.
What does it look like with the roadsign bit tilted, like the signs(you know, a square rolled onto one corner?!).
im all for that design though, i think its sweet as!

good work all

[Gixxer]

p0stal, they look awsome, I will be sending you the other pic i had.
but i like these, the top pic is my choice, the road sigh look is great, how about yellow with a warning sign, like.

WARNING!
PIC
KIWIBIKER

or some sorts, maybe

WARNING
PIC
KIWIBIKER LOOSE

DANGER
PIC
LOW FLYING KIWIBIKER

the shirts can come in lots of different colours.
maybe we can do the lot ourselves and just get the T's, we seem to have the talent amongst the group.

Cheers

Gixxer

[p0stal]

so many good ideas, I like the "Low Flying" theory! :D

here's the colors on the originals...


http://homepages.maxnet.co.nz/blackcat/BikeA-Sign.gif


http://homepages.maxnet.co.nz/blackcat/BikeA-SignY.gif


http://homepages.maxnet.co.nz/blackcat/BikeA-SignO.gif


http://homepages.maxnet.co.nz/blackcat/BikeA-SignR.gif

[p0stal]

The graphic isn't as prominent on this one, but I must admit, I do like the overall effect... :D

http://homepages.maxnet.co.nz/blackcat/BikeA-Sign2Y.gif

[p0stal]

budget graphic on this one, but it illustrates the point better... Man, I've obviously got too much free time... :D That does it, I'm off for a ride.

http://homepages.maxnet.co.nz/blackcat/BikeA-Sign3Y.gif

[Gixxer]

god dam your fast.

The yellow looks good, I do like the low flying one.

[p0stal]

yeah, I like the low flying one with the original pic, but I still like just the pic & the kiwibiker, in yellow, too.

& as for being so fast, I'm an old-school forum-goer, mainly gaming forums where you've got to be this fast if you want to get a word/pic in edgewise... :D

[Gixxer]

I like the yellow as well, I agree with your comment about having the graphic more prominent, we may even be able to do a couple of different types.

Think we really want people to know that we are from kiwibiker, maybe even have a separate print out of the sign with www.kiwibiker.dynu.com?

really do want to see the kapow jagged edge thing as well.

awesome p0stal.

ha kiwizrx, do you make the screens and do the prints?
how much does it cost to get the screens done?

[p0stal]

Originally posted by Gixxer

Think we really want people to know that we are from kiwibiker, maybe even have a separate print out of the sign with www.kiwibiker.dynu.com?

really do want to see the kapow jagged edge thing as well.



I thikn this one just looks really sweet, it's the simplicity of it... It'd make a really good centre back of shirt design.

http://homepages.maxnet.co.nz/blackcat/BikeA-Sign4Y.gif


as for starbursts, they are pretty old-school, they look kinda tacky, I think the road-sign design will be a bit more enduring, it won't age so quickly...

[p0stal]

How's this for a shirt layout? I assume that's what you meant by "workshirt"... :D

http://homepages.maxnet.co.nz/blackcat/ShirtLayout1.gif

[wari]

they both look shit hot !!!

where to now from here ???

[p0stal]

source a screenprinter & shirts, I guess...

[bikerboy]

The shirts are looking fantastic guys, so much( hidden?) talent out there.

If I may presume to make a suggestion: perhaps the back picture can just say kiwibiker, and the sleeve logo have the web address?, or even put the web address on the pocket top. Just trying to help, not that you need it.

I'll take some regardless of the final outcome, besides too many cooks, etc.:done:

[p0stal]

All suggestions welcome, I'm not tryin to take over the project or anything! :D

It might be a good idea to swap the logos over, & have kiwibiker on the back, I guess it just depends on how much you want to push the website...

[Cuban]

Awesome stuff,
the shirts look great postal, so now we just have to get a handle on some prices and stuff, but ill take one with the current layout, but id agree that maybe have the site addy on the shoulder (and) pocket?

XL for me thanks! who wants some cash?!!

[p0stal]

Right, swapped the logos, & added the breast pocket website address.

http://homepages.maxnet.co.nz/blackcat/ShirtLayout2.gif

PS Put me down for a medium or large... :D

[Gixxer]

I like the sleave and pocket logo's with the kiwibiker and pic on the back.
my vote is for that one, will work nice on T's as well.

I have the prices from one of the screen print shops i looked at, the only prob is that the work shirts looked cheap, with cheap denim.

I will look around today and see if I can find another place with decent work shirts, If anyone knows of a good place, let me know.

will try and get this all underway this week.

[p0stal]

Your best bet is probably to try & find the shirts seperately from the printers, maybe find a factory outlet or something, & get a bulk order, most screen printers will print on whatever fabric you bring them. And if you can find a fabric other than denim, maybe the same kind of stuff Dickies workshirts are made of, or something, they'll probably end up looking better.

[Gixxer]

Originally posted by p0stal
Ythe same kind of stuff Dickies workshirts are made .

That is exactly the type of shirt I was looking for, I think they are made of a heavy cotton and not denim??

[p0stal]

Originally posted by Gixxer
That is exactly the type of shirt I was looking for, I think they are made of a heavy cotton and not denim??


Yeah, heavy cotton, or cotton/polyester, something like that...

[Gixxer]

I called the print shop I found to be the cheapest, and spoke to a young las there, and she knew exactly what I was after and sai yes they do have them, they are the street wear shirts.

going there to look at them tomorrow.

[p0stal]

Sweet!

Things are progressing apace...

/rubs hands together fiendishly :D

[SpankMe]

I've just decided to register a proper domain name for this site, so the address will soon change to www.kiwibiker.co.nz.

[Coldkiwi]

excellent designs guys!

Very keen.. I'll buy one!

[p0stal]

New Website... :D

http://homepages.maxnet.co.nz/blackcat/ShirtLayout3.gif

[p0stal]

Any news on the printing yet?

[Gixxer]

Wari how do you want to proceed?

Do we start with pre orders to get the money to pay for the start up?

I know I am in for 2, 1 T 1 work shirt.

Happy to push on with this.

I have all the cost, give me a bell 027 4536347.

Cheers

[Cuban]

im keen for a workshirt, and happy to pay up front, what cost are we looking at each? i take it you found some shirts of satisfactory construction?
awesome guys,
im stoked this is gonna get off the ground, thanks to Gixxer,kiwizrx and Postal for getting out there...

[bikerboy]

:cool: When do we get to order the shirts? Are theyone type or is there a choice. I'd get a workshirt and a t-shirt if available. Someone needs to set up an order form. Do you want the money upfront? No problem just let me know, the guys did such an awesome job can't wait!.:soon:

[SpankMe]

Sent an email to <a href="http://www.amex-tee.co.nz/">Amex Custom Prints</a> about getting the shirts printed and am waiting for a reply.

[Gixxer]

<DIV>Ok, I have looked at the cost etc, and spoken to the printers, there is a 2 week turn around due to demand.

To cover the expense of the set-up and the cost of the shirts and printing&nbsp;and as this was started as a way of funding the site, here are the prices, so let me know if you think this is too much.

$50 work shirts and $30 for T's.

The work shirts are black only and the T's come in most colours, these prices may change depending on orders, and this price is with 3 prints per shirt, back, sleeve and front, so if we go for 1 or 2 prints per shirt this will bring the price down.

I like the pic on the back by itself, and I am keen on the sleeve as well.

Cheers

Gixxer</DIV>

[bikerboy]

:cool: I'm in for a workshirt and a t-shirt. From my experience I would not think the price will drop much for two screens versus three. There may be a $10.00 drop for one versus three. The more "standard" the cheaper. If we can agree on a design for both shirt types and a minimum run the will come down. I agree the site should make some money out of this.:bigthumb:

[p0stal]

I think if we're going for just 2 prints per shirt, it should be the back &amp; sleeve, but I don't think 2 will be that much cheaper than 3, especially not in the setup/early run&nbsp;stages. As for tees, perhaps just the logo w/website on the back, &amp; the kiwibiker logo small centered front. Pricewise, that sounds about right for a small run of custom printed shirts. Put me down for a work shirt, med/large, I'm not sure yet.:D

&nbsp; Thoughts/ideas on the logos?

[Gixxer]

I agree on the back pic and sleave logo for the work shirt and back pic no sleave and name on chest for the T's.

the print cost is only $3 per print, but it is the setup cost that is the killa.

Kiwizrx, can u help in that department, how much would it cost to get the film from u?

Cheers

[wari]

What say we just get together , those interested and make some final decisions. Work out the final cost and then SpankMe or I can e-mail all the board members with the offer and how to pay and all that kinda shit..

The other thing to consider is the cost of postage etc,. and the work involved in doing it. For those who are outside of Auckland that is.

Is it still possible to get iron on stickers made? ... they might be a good option as well.

BTW, I'm pretty much free this week . Working on the weekend but could slip away for a while if we meet in the CBD. What suits?

&nbsp;

wari

[Skunk]

Originally posted by Gixxer
Kiwizrx, can u help in that department, how much would it cost to get the film from u?

Cheers

I could try for a zero cost. :D
Just confirm what you're needing.

[Gixxer]

<DIV>ha Wari, anytime after 6 pm this week is fine with me. i work in the CBD.

kiwizrx,&nbsp; looking at the getting a film made for the screens, the main pic&nbsp;<SPAN class=772392522-17022003>maybe </SPAN>A4 size or so, www.kiwibiker.co.nz (http://www.kiwibiker.co.nz/) for the pocket, and the small sleeve logo. I have asked the girl at the print shop about this and she said to call them for the details on specs?

Cheers</DIV>

[Skunk]

Sounds good. Email me the specs (or give me the email address of the print shop) and the files and I'll courier the film back to ya (if ya give me a courier address :p )

[wkid_one]

They look great - but I think you should expand on the logo and have a statement as well.......the roadsign is a good idea - I would prefer a non-collared shirt as a collar isn't particularly comfortable under leathers......just a thought to consider....

&nbsp;

[big_bry]

Hey im in for a work shirt &amp; a tshirt...

Prob need fat bastard size..... (XL or XXL)

Let me know who I need to give some $$$ to

&nbsp;

B.

[wari]

Spankme, Gixxer and&nbsp;I met on Friday to talk over the details and correct me if I'm wrong you two, but this is what we decided.

Gixxer is going to get final costings for us.

Then we will send out an e-mail to Kiwibiker members with those details and give information on how to go about ordering. Most likely we will use paypal which SpankMe is familiar with and or cheque.

Hopefully the e-mail will go&nbsp; out sometime soon.

wari

[bikerboy]

Any news on the shirt front? It would be great to have them by the ride on the 16th.:confused:

[Slim]

As a newbie, I'd just like to add that this is looking great. :D


Originally posted by p0stal
As for tees, perhaps just the logo w/website on the back, &amp; the kiwibiker logo small centered front.
I'd suggest putting it on the left or the right, and then members can get their sign-on names put on by iron-on transfer individually (there's a place here in Hamilton that does them at a reasonable cost: Laser Copy Technology 07-8340280)

[p0stal]

Originally posted by Slim

I'd suggest putting it on the left or the right, and then members can get their sign-on names put on by iron-on transfer individually (there's a place here in Hamilton that does them at a reasonable cost: Laser Copy Technology 07-8340280)

&nbsp;

&nbsp;

That'd work really well on the workshirts, it'd look like one of those old-style US gas station shirts, that's pretty classy. :D As for T-shirts, though, left or right side logos don't look as good, as there's no pocket to put it on, &amp; so no reason to off-centre it. Design-wise, I've always prefered centre logos. ;)

[Slim]

Postal - if you're gonna be at the Cambridge-Hamilton toy run, come & see my Visordown shirt. :)

PM me if you want my mobile number.

[wkid_one]

Guys,

How about a polo neck (like skivvy but not as high)&nbsp;long sleeve shirt.&nbsp; You could have kiwibiker.co.nz down the sleeve and/or around the neck with the small sign on the breast and large sign on the back - just a thought.&nbsp; This would be excellent for under leathers etc.......

[Coldkiwi]

I think a short sleeved shirt would be more wearable. I have at least 3 long sleeve polo necks and they only get worn on occasions in the 'depths' of winter in Auckland, although I'd wager Figjam would wear his all year round!!

I'd prefer a work/gas station style&nbsp;shirt

&nbsp;

[Kwaka-Kid]

WHERE ARE THE SHIRTS @ DUDES? i read msot of the posts, and i wanna know, did anyone end up getting them or anything? imreally keen, and would even be generous enough to loan some money to whoevers in charge for the upfront costs (so long as i did eventually get it back).

&nbsp;

im just SOOOO keen for a few shirts thanx :) and i reckon www.kiwibiker.co.nz (http://www.kiwibiker.co.nz) on the back would be mint! :) love it all tho.

[SpankMe]

I will try and look into what needs to be done to get this going next week.

[SpankMe]

ok, the shirts are gonna cost $50. Not cheap, but this includes the setup cost. This also does not include shipping if ya live outside Auckland. We need at least 20 orders to start this so if you are certain you wish to buy, please send me a <a href="/forums/private.php?action=newmessage&userid=1">private message</a> with how many you will be getting when I am ready to start accepting orders.

The two shirt types we can choose from:
Mens business shirt end on end woven single pocket L/S poplin in charcoal sizes sm – 3xl
Black cotton drill shirt contrast collar detailing button down collar L/S sizes sm – 2xl
At this point I am just looking at having the symbol on the back with the web site address under the bike.

I'd like to thank Postal for his excellent artwork. Postal, can you please send me the back symbol in one of the following formats:

ARTWORK SPECS: PC Format, Illustrator 9 Coral 9 Vectored EPS.

[Kwaka-Kid]

yeah im keen for anything

Just puit me down as a DEFINATE for 1. and i quite possibly would buy 2 to support the cause.

[Coldkiwi]

Originally posted by SpankMe

The two shirt types we can choose from:
Mens business shirt end on end woven single pocket L/S poplin in charcoal sizes sm – 3xl
Black cotton drill shirt contrast collar detailing button down collar L/S sizes sm – 2xl
At this point I am just looking at having the symbol on the back with the web site address under the bike.


Ok, i know cotton drill but what's a mens business shirt end on end woven etc???

no T-shirts then?

&nbsp;

[Kiwi]

Men’s business shirt?? Black cotton drill shirt?? What is the difference?

Kiwi :confused:

[SpankMe]

I'm gonna go check the shirts out and get some pictures in a couple of days.

[Kiwi]

thanx

good idea

kiwi :bigthumb:

[Kiwi]

Hi

Any news on the shirt front??????

&nbsp;

&nbsp; :rolleyes:

[SpankMe]

Went to check the shirt types out but he had the wrong ones. He is gonna get the ones I want in but I haven't heard from him yet. Will chase it up this week.

[Kwaka-Kid]

good man :)

[SpankMe]

Anyone know what’s happened to p0stal? I need to get the logo image file off him.

[Kwaka-Kid]

You scared him off :P

[SpankMe]

Well after being pissed about by <a href="http://www.amex-tee.co.nz/">Amex Custom Prints</a> I decided to find another screen printers. I got a good recommendation from <a href="http://www.illicit.co.nz/">Illicit Streetwear</a> to go to ESP screen printers. After visiting them I feel better about getting this done. In fact they told me they get many annoyed ex Amex customers.

Only problem is that they do not have the shirts we want so I still need to source these from somewhere. Illicit do a very nice shirt, but they are $60, with the cost of the printing this is a bit too much. Having said that I will be getting one for myself from there. But if anyone knows where we can get some nice, inexpensive short sleeve work shirts so we can start taking orders. I will also be looking around to see what I can find.

Once the screen is made thou, we should be able to take orders for t-shirts straight away. I will keep you informed.

[SpankMe]

The screen printers have the graphics and they are gonna print a polo shirt and a t-shirt next week for me to have a look at. I'm still trying to find a decent drill shirt.

[SpankMe]

Finally got the shirt printed and it looks good. Will only be doing a t-shirt for the moment and a polo shirt later. I will be getting prices tomorrow and when we are ready to take orders I will send all members an email. The screen printers can also do a long sleeve black business shirt if anyone is interested.

All shirts will be printed to order, so you will have the optoin of putting the logo on the front or the back.

<center><img src="/images/shirt_01.jpg" alt="This logo is the property of Kiwi Biker. Copyright © 2003" ><br /><br /><img src="/images/shirt_02.jpg"></center>

[Kwaka-Kid]

nice1! im keen.. only i thought that picture woulda looked better on the back.. considering its of the back of a bike.. unless the lady has her tits on the wrong way?

oh.. not that i was looking.

haha, nah yeah im keen as :) just gimmie a price and ill even pickup and pay cash anywhere in auckland :D and possibly a longsleeve one too.. on the T can i get one with it on the back? and just www.kiwibiker.co.nz (http://www.kiwibiker.co.nz) on the right/left tit on front?

[babyB]

way cool love the shirts guys:D

Like Kwaka i think the picture on the back would be better

The T-shirts and polos sound goodbut i not so keen on the busniss shirts.lol.

&nbsp;

[wkid_one]

Do the funbags come with the shirt?&nbsp; If so, I'll take 10 shirts please!

Actually, I agree, the picture on the back would be better and the KB address on the left tit.....I also agree that a polo would be better.

&nbsp;

[SpankMe]

With the shirts now ready to order, I have closed this thread and created a new one with order details.

<center>I'd like to thank <a href="/forums/member.php?s=&action=getinfo&userid=118">Gixxer</a> for the great biker logo design.

And I'd like to thank <a href="/forums/member.php?s=&action=getinfo&userid=175">p0stal</a> for the professional graphic design of the logo.

<a href="/forums/showthread.php?threadid=361">New Kiwi Biker Shirt thread</a></center>

[SpankMe]

Did anyone save the logo images that were posted by p0stal in this thread during it's development? If so, could you please email them (spankme@kiwibiker.co.nz) to me.

[Sensei]

Just a thought Could you put our ueser names on the back in smaller lettering Eg SENSEI so other KB people could put a name to posters on here . What do you think ??
SENSEI

[inlinefour]

Not too many people noticed the KB sticker on the back to the Surf (well apart from the riders that waved and the one who had a chat as we passed) :niceone:

[marty]

i guess with a KB membership of .04% of the NZ population, there is a *good* chance you'll see other KBers out there...

[thehollowmen]

I had my tshirt nicked today!

I'll have to order another one when I get paid next week