PDA

View Full Version : Suzuki AZ50 tyre pressure?



NickM
26th May 2012, 15:52
Hi,

I have a 2007 Suzuki AZ50 but don't have an owner's manual and can't find one online. Does anyone know what the tyre pressure should be for this model?

Thanks

Gossamer
18th September 2012, 14:29
Hi Nick,
I bought a Forza Ciclone 50cc for my son. Manual indicated that the tyre pressure is actually on the tyre wall. Have a look.
Cheers.
Michael

CrazyFrog
12th October 2012, 20:43
Hi Nick,
I bought a Forza Ciclone 50cc for my son. Manual indicated that the tyre pressure is actually on the tyre wall. Have a look.
Cheers.
Michael

No, No, No. The pressure stamped on tyre sidewall is the max inflation pressure, not recommend pressure.
Most scoots use 22psi on front, 24-26psi on rear. Unless you've got a pillion on board, hahahaha.

gammaguy
12th October 2012, 22:58
heres a copy paste from my factory manual

タイヤ空気圧
前輪: 125kPa (1.25kgf/cm2)
後輪: 175kPa (1.75kgf/cm2)

:cool:

CrazyFrog
28th February 2013, 05:43
125 kpa = 18 psi
175 kpa = 25 psi

If in doubt, read the manual ;)

awa355
11th March 2013, 01:50
125 kpa = 18 psi
175 kpa = 25 psi

If in doubt, read the manual ;)

Those pressures seem low. My scooter's sticker says 29lb front and rear, so thats what I run in them. Mind, they are a fat tyre, 120/90/10 and 130/90/10.