Keihin CR 33mm or 35mm wanted

[sidecar bob]

Looking for a set of these, new or used to suit a Gsx1100 Katana pre '82 racer I am building.
I am told they are still made new, but have been unable to locate any.
If anyone has some, or can give me any leads, I would be most grateful.
P.s, Round slide CR's, not FCR's.
Cheers,
Steve.

[jellywrestler]

sudco show and go in aussie there's numerous outlets also ebay usa any day of the week usually have a set for sale may not be the size you want but they can get them.
Also there was a set on KB about a week ago from memory, they may have been smaller though

[jellywrestler]

http://www.kiwibiker.co.nz/forums/showthread.php/150533-Post-classic-race-bits-for-sale

here tis

what sort of ignition system ya going to use?

[sidecar bob]

http://www.kiwibiker.co.nz/forums/showthread.php/150533-Post-classic-race-bits-for-sale

here tis

what sort of ignition system ya going to use?

The rider & I damn near wore the keyboard out looking for them on E bay on the weekend.
Thanks for the tip there.
What sort of ignition do you reccomend?
I raced one years ago with the standard ignition with no ill effects, but im open to any suggestions that will make this bike faster or more reliable.

[Kickaha]

Diesel Pig bought his CR carbs from Show and Go in Oz, if you find out who Kelly sold her outfit to up there it had a set of CR on it although they may have been a bit bigger

Ignition, check out Ignitech (http://www.ignitech.cz/english/aindex.htm) Wobbly on here can do them, there's a few people I know running them on different bikes

[Grumph]

From memory, Kelly's chair had 35's...but it was a while back now...

Ignition - just go Dyna - even the basic Dyna S will suit but the 2000 has a limiter which can be useful.

[nodrog]

http://www.dynoman.net/carb/keiCR.html#cr33

http://www.motorcycle-exhausts.co.uk/Suzuki_CR--category--511.html

[sidecar bob]

http://www.dynoman.net/carb/keiCR.html#cr33

http://www.motorcycle-exhausts.co.uk/Suzuki_CR--category--511.html

Aww gordy!! You are the bestest googler ever!! thanks for that!!!

[sidecar bob]

From memory, Kelly's chair had 35's...but it was a while back now...

Ignition - just go Dyna - even the basic Dyna S will suit but the 2000 has a limiter which can be useful.

Found Kelly, found the guy that bought it off her, things are progressing nicely, thanks guys.

[nodrog]

Aww gordy!! You are the bestest googler ever!! thanks for that!!!

you can thank me properly later :spanking:

[codgyoleracer]

http://www.dynoman.net/carb/keiCR.html#cr33

http://www.motorcycle-exhausts.co.uk/Suzuki_CR--category--511.html

Yip Dynoman is good source, contact name is Buzz

[RDjase]

Looking for a set of these, new or used to suit a Gsx1100 Katana pre '82 racer I am building.
I am told they are still made new, but have been unable to locate any.
If anyone has some, or can give me any leads, I would be most grateful.
P.s, Round slide CR's, not FCR's.
Cheers,
Steve.

http://www.motorcyclecarbs.com/Keihin_CR_Special_Carburetor_C636.cfm


A mate bought a carb for his VMX racer and told them the engine specs, carb turned up, fitted it, started 1st kick and idled. Didnt need to play with jetting for at all. Sounds like there on to it with pre jetting and fitting kits

http://www.motorcyclecarbs.com/CARBURETOR_KIT_SUZUKI_GSX1100_P9203C650.cfm

[sidecar bob]

Thank you to the contributors on this thread. Tonight I dropped a couple of grand on some very choice bits. (Thanks for the loan of your internet purchasing skills Gordy)
Brand new 35 cr's, Dyna 2000 ignition & a few bits to hold it all together.
If anyone has anymore good ideas for the bike, im keen to hear.

[nodrog]

...If anyone has anymore good ideas for the bike, im keen to hear.

Turn it into a sidecar and let me wreck it. :eek:

[sidecar bob]

This morning I recieved my box full of cool shit!!!
Opening a box full of the best quality, brand new hotrod bits cant be beaten!!
Cheers for the leads once again guys.

[roadracingoldfart]

This morning I recieved my box full of cool shit!!!
Opening a box full of the best quality, brand new hotrod bits cant be beaten!!
Cheers for the leads once again guys.

Hmmmm treasure ....... :niceone::drool: