Log in

View Full Version : Veypor VR2 HELP.



george formby
26th June 2012, 11:43
Kia Ora all,

My computer doctor is having difficulties upgrading the firmware on the Veypor for a customer. He has downloaded it from the site, the computer says the upgrade is successful but now he just has a black screen & is stumped. Anybody here able to help?

imdying
26th June 2012, 14:24
Appears to be reasonably common to have to reflash it a few times to get it to work successfully, so don't give up yet :)

http://www.veypor.com/forum3/viewtopic.php?f=6&t=2299

p.dath
26th June 2012, 14:24
Tried removing power completely, and then re-applying power?

george formby
26th June 2012, 14:26
Tried removing power completely, and then re-applying power?

Not I, but I will mention it. I am nowhere near smart enough for these things but my techy mate is stumped.


Appears to be reasonably common to have to reflash it a few times to get it to work successfully, so don't give up yet

15 times......

Cheers for the responses.

imdying
27th June 2012, 14:43
15 times......

Cheers for the responses.

Yeah, don't give up hope though... I have some microcontrollers that have required holding your tounge just the right way for them to reflash.

george formby
27th June 2012, 14:47
The problem he has is that the update is succesful, so it said, but when he tries to open it on the computer it's just a black screen. No starty anymore.

Poor bugger really hates to let a client down too but he is stumped.

avgas
27th June 2012, 15:07
Yeah, don't give up hope though... I have some microcontrollers that have required holding your tounge just the right way for them to reflash.
I didn't know Rabbits were still being made after Atmel crushed them ;)

imdying
27th June 2012, 15:48
The problem he has is that the update is succesful, so it said, but when he tries to open it on the computer it's just a black screen. No starty anymore.

Poor bugger really hates to let a client down too but he is stumped.

Yeah, that's not unusual :D If you were flashing from some sort of IDE or a reflasher that wasn't proprietary, there would probably be more info. Try starting it up with the very basics connected (just earth and 12v).

george formby
27th June 2012, 15:51
Yeah, that's not unusual :D If you were flashing from some sort of IDE or a reflasher that wasn't proprietary, there would probably be more info. Try starting it up with the very basics connected (just earth and 12v).

Thank you, I have forwarded it to the clever people.

imdying
28th June 2012, 14:31
Bugger all help I know :( Sometimes these things just get a bee in their bonnet about nothing... sometimes I've taken the circuit board out, shorted the entire thing on a piece of tin foil to discharge everything on it, and then had success...

george formby
28th June 2012, 15:03
My mate has spent a fair but of time scouring the interwebs but all he has found is people with the same problem & no solutions. Oh well, onwards & upwards.

imdying
28th June 2012, 17:28
Can I recommend the Race Technology DASH 2 as a replacement... it's lovely :D

max_load
7th February 2023, 11:10
Hey fellas. I don't suppose anyone has a digital copy of the manual? I would be really grateful.

FJRider
7th February 2023, 14:47
Hey fellas. I don't suppose anyone has a digital copy of the manual? I would be really grateful.

Is this what you are looking for ??

http://www.race-technology.com/upload/PDF%20manuals/DASH2%20PRO%20Manual%20V%201.2.pdf

FJRider
7th February 2023, 15:00
Kia Ora all,

My computer doctor is having difficulties upgrading the firmware on the Veypor for a customer. He has downloaded it from the site, the computer says the upgrade is successful but now he just has a black screen & is stumped. Anybody here able to help?

The Veypor forums ...

https://www.vtxoa.com/threads/veypor-vr2.228319/

And a few others ...


https://www.youtube.com/watch?v=5qVjjncbM2g


http://ruckn.com/veypor-vr2-install/


http://www.race-technology.com/upload/PDF%20manuals/DASH2%20PRO%20Manual%20V%201.2.pdf