PDA

View Full Version : GS1000 flywheel wanted.


Katman
2nd July 2012, 14:06
Does anyone here running a GS1000 as a total loss system have a flywheel for sale?
cs363
2nd July 2012, 19:00
There's 4 for sale on EBay if you get no joy locally Steve: http://www.ebay.co.uk/sch/i.html?_nkw=gs1000+flywheel&_sacat=0&_odkw=gs1000+f%3Bywheel&_osacat=0&_from=R40&LH_PrefLoc=2
sidecar bob
2nd July 2012, 22:50
Is it peculiar to the GS1000, or will a GSX1100 one fit? I have a few of them I wont be needing.
You could PM Grumph on here.
Katman
3rd July 2012, 09:54
Is it peculiar to the GS1000, or will a GSX1100 one fit? I have a few of them I wont be needing.
You could PM Grumph on here.

Cheers Steve. Unfortunately Suzuki's microfiche doesn't give a part number for the GS flywheel so I can't compare it to the GSX one. Any chance you could send one over to me so I could give it a go?
Grumph
4th July 2012, 10:02
Is it peculiar to the GS1000, or will a GSX1100 one fit? I have a few of them I wont be needing.
You could PM Grumph on here.

Pretty sure the GSX one is a bigger taper.
What is it that you want ?
I have a good rotor separated from the boss which is surplus to requirements or rotor with boss.
ideally i'd like at least one spare boss so if you've damaged a rotor but the boss is OK a swap could be done...
Starter clutches of course are easy...all the GS twins and fours have the same bolt pattern and interchange.

PM me

Grumph
jellywrestler
5th July 2012, 10:35
Cheers Steve. Unfortunately Suzuki's microfiche doesn't give a part number for the GS flywheel so I can't compare it to the GSX one. Any chance you could send one over to me so I could give it a go?

i've crunched one GS1000 part number and it cross references to six models so they may not be interchangeable between all GS1000's; so what is the model you have Steve?
98tls
5th July 2012, 10:42
Wonder if Ron Ayers online fiche is any use.Just a thought.http://www.google.co.nz/url?sa=t&rct=j&q=ron+ayers+fiche&source=web&cd=2&ved=0CFgQjBAwAQ&url=http%3A%2F%2Fwww.ronayers.com%2Ffiche%2F&ei=aMb0T8epAouziQeLxYDVBg&usg=AFQjCNFWyb85dzHrcHmWcl8sgdt93clHsA
Grumph
5th July 2012, 11:24
i've crunched one GS1000 part number and it cross references to six models so they may not be interchangeable between all GS1000's; so what is the model you have Steve?

Things are in motion anyway but for what it's worth, I have here rotors from ; slide carb "S" model,slide carb "E" model and CV carb "E" model on various things (none for sale) and all appear interchangeable. All have the same taper too.
this info may help someone.
jellywrestler
5th July 2012, 14:17
Things are in motion anyway but for what it's worth, I have here rotors from ; slide carb "S" model,slide carb "E" model and CV carb "E" model on various things (none for sale) and all appear interchangeable. All have the same taper too.
this info may help someone.
seems to be whats covered here.

Part # = 31402-49010
Part Description = ROTOR ASSEMBLY
Model Count = 5
GS1000C 1978 1000 GS1000 STREET
GS1000EC 1978 1000 GS1000E STREET
GS1000LN 1979 1000 GS1000L STREET
GS1000N 1979 1000 GS1000 STREET
GS1000SN 1979 1000 GS1000S STREET