GB500 or Airhead Beemer up to $2000

[cave weta]

keen on pretty much anything like this for my next Cafe Racer project

Share here what you have for me

[Padmei]

I had a GB & I tihnk it would a better bet to get an old SR or similar & widen the scope of your project. GBs are getting pretty good money nowadays whereas the SRs are cheap as chips & you can do great things with them as per DEM etc. I saw one down here on TM for about $1300.
As for an airhead under $2K you'd have to be very very lucky cos there are so many airhead fans out there that know the appeal & value of them. In saying that I have a bike build over on adv rider (where posting pics isn't a problem) that I bought for bugger all & there are currently a lot of cool people helping me get it back together.
Voltaire bought a R65 for $1100 recently which was a steal.

Unless you really really want spokes, there are heaps of bikes to cafe, but as usual you'll get the cocks moaning that you shouldn't mess up a factory bike blah blah blah
Make sure you do a build thread & i take it you are aware of the pipeline site etc

Actually CX500s are very cool & can easily end up looking like guzzi cafes

[cave weta]

I had a GB & I tihnk it would a better bet to get an old SR or similar & widen the scope of your project. GBs are getting pretty good money nowadays whereas the SRs are cheap as chips & you can do great things with them as per DEM etc. I saw one down here on TM for about $1300.
As for an airhead under $2K you'd have to be very very lucky cos there are so many airhead fans out there that know the appeal & value of them. In saying that I have a bike build over on adv rider (where posting pics isn't a problem) that I bought for bugger all & there are currently a lot of cool people helping me get it back together.
Voltaire bought a R65 for $1100 recently which was a steal.

Unless you really really want spokes, there are heaps of bikes to cafe, but as usual you'll get the cocks moaning that you shouldn't mess up a factory bike blah blah blah
Make sure you do a build thread & i take it you are aware of the pipeline site etc

Actually CX500s are very cool & can easily end up looking like guzzi cafes

Im watching some CX400 auctions too- they are cheap as chips! - tell me more about the pipeline site please

[Padmei]

http://caferacerdreams.blogspot.com.es/search/label/CRD%2314%20%C2%A8The%20Challenge%C2%A8

http://www.pipeburn.com/home/?currentPage=2

http://www.untitledmotorcycles.com/

Try these ones.

You've had a look on Tme this morn aye?:whistle:

[cave weta]

http://caferacerdreams.blogspot.com.es/search/label/CRD%2314%20%C2%A8The%20Challenge%C2%A8

http://www.pipeburn.com/home/?currentPage=2

http://www.untitledmotorcycles.com/

Try these ones.

You've had a look on Tme this morn aye?:whistle:

Yeah- watchin my Hyosung sell..... what did I miss?

[dogsnbikes]

Yeah- watchin my Hyosung sell..... what did I miss?

This site is airhead focused...

http://flatracer.com/


Will post some updated pic's next month of Th CBGB once the structural framework is completed

[Sable]

GB4/500s already cafe'd from the factory.? All the 'custom' ones I've seen just look like stupid bastardisations of the original item.

[cave weta]

You've had a look on Tme this morn aye?:whistle:

Nah? - I meant what did I miss on Trade me? - or were you watching my Hyosung too?

Now THIS is why Im looking at airheads.........

266515

Oh I bought a GB500 yesterday for $1900.00 -needs a new seat cover and muffler

266516