Ignition coils

[ducatilover]

Anyone have a set the following coil over plug set ups
GSX-R 600-750-1000-1300, 2004-2005

ZX-9R, 1998-2003

ZX-12R, all years

ZX-10R, 2004~2007

ZX-6R & 636 (2003-2007)

Z1000

CBR600, 2003~2006

I'm after a set of four, and really, really want a loom (plugs are expensive for some reason) :yes:

Cheers :D

[gammaguy]

I have a warehouse full of wiring looms,theyre not too expensive either

what models you need them for?

[ducatilover]

I have a warehouse full of wiring looms,theyre not too expensive either

what models you need them for?
Just the ignition loom to the coils, for any one of those models listed.
I can get 'em off eBay, but I'll be a nice chap and attempt to source in NZ :sweatdrop
If it's the CBR600, AFAIK the F4i onwards used the coil over plug set up

[gammaguy]

no worries i only sell complete looms

good luck!

[ducatilover]

no worries i only sell complete looms

good luck!
Thanks anyway mate :niceone:






*Updated list on OP

[Fast Eddie]

i got a couple sets of fzr/yzf1000 coils..
dunno what u mean coil over plug tho..

apart from these coils are literally mounted above the plugs on my outfit haha.. but they have coil then ht lead then plug cap and plug

[ducatilover]

i got a couple sets of fzr/yzf1000 coils..
dunno what u mean coil over plug tho..

apart from these coils are literally mounted above the plugs on my outfit haha.. but they have coil then ht lead then plug cap and plug Some people call 'em stick coild, some coil over plug, some call 'em pencil coils.
It's an individual coil per plug, so I'd have 4 instead of 2 big faggoty ugly ones with leads

268166
These give me moar room under the tank and a higher quality spark than 21 year old Shitasfaki coils :D

[Fast Eddie]

oh yip i know the ones.

nup none of them lying around.

good luck ;)

[RDjase]

Anyone have a set the following coil over plug set ups
GSX-R 600-750-1000-1300, 2004-2005

ZX-9R, 1998-2003

ZX-12R, all years

ZX-10R, 2004~2007

ZX-6R & 636 (2003-2007)

Z1000

CBR600, 2003~2006

I'm after a set of four, and really, really want a loom (plugs are expensive for some reason) :yes:

Cheers :D

http://www.ignitech.cz/english/aindex.htm

Any of these look right?

[ducatilover]

http://www.ignitech.cz/english/aindex.htm

Any of these look right?
I can't find individual coils like in the pic I posted before?

It looks to be an eBay job currently

eBay will be cheaper anyhow, can guarantee it

[RDjase]

I can't find individual coils like in the pic I posted before?

It looks to be an eBay job currently

eBay will be cheaper anyhow, can guarantee it

268313

http://www.tridon.com.au/partfinder/default.aspx

Thats a 2008 Falcon DOHC 4.0 coil, must be another car coil available thats straight if you have a browse with the parts finder

[ducatilover]

http://www.tridon.com.au/partfinder/default.aspx

Thats a 2008 Falcon DOHC 4.0 coil, must be another car coil available thats straight if you have a browse with the parts finder
The coild I listed are a perfect fit though, with the exception of the ZX12 which will sit a few mm proud.
I'll keep hunting, there are heaps on eBay here, just though I'd attempt to find a deal locally :yes:

[FROSTY]

Check out modern aftermarket car coils.--I haven't but might be a line to follow.

[RDjase]

The coild I listed are a perfect fit though, with the exception of the ZX12 which will sit a few mm proud.
I'll keep hunting, there are heaps on eBay here, just though I'd attempt to find a deal locally :yes:

Bnt Automotive

http://www.bntnz.co.nz/

Sell area agent for Tridon

[RDjase]

Applications for Holden Commodore VZ Crewman, V6, 3.6L, DOHC VVT, Petrol, ESPFI, RWD, 175kw, Eng code: LE0 Alloytec 175, 1/03/2005 - 1/02/2006

268417

268418




Check out modern aftermarket car coils.--I haven't but might be a line to follow.

[ducatilover]

Thanks guys, I'll have a poke around and see what I can find.
The Kawasaki won't run if it sees more than 20ohm resistance in the coil circuit (no idea why, that's just what they do) so there's going to be a lot of research needed.

Or I'll just buy some from overseas this week, that are known to work.

[RDjase]

Thanks guys, I'll have a poke around and see what I can find.
The Kawasaki won't run if it sees more than 20ohm resistance in the coil circuit (no idea why, that's just what they do) so there's going to be a lot of research needed.

Or I'll just buy some from overseas this week, that are known to work.

Does it run a igniter module that goes to the coils?

http://www.intermotor.co.uk/

Is another electronic parts supplier. One of the must have tech specs on there coils

[ducatilover]

Does it run a igniter module that goes to the coils?

http://www.intermotor.co.uk/

Is another electronic parts supplier. One of the must have tech specs on there coils

It sure does, a damn fussy one at that :facepalm:

Excellent thanks :D

[RDjase]

It sure does, a damn fussy one at that :facepalm:

Excellent thanks :D

Did you find any coils that will work?

[ducatilover]

Did you find any coils that will work?

Not yet, apart from the ones listed on my original post