PDA

View Full Version : Cb250rs



Magua
8th December 2012, 14:01
This was my brother's daily runner until it was nicked by a couple of thieves. Thankfully it was recovered with only minimal damage.
I have replaced several levers, the speedo surround (which was cracked), put a new ignition in it, and have given it a general tidy up (new oil etc.)
Attempted to get a wof for it this morning (8/12/12), the only thing holding it back from obtaining a warrant is a new front tyre (90/90 18). Rear tyre, Bridgestone bt45, has 2 - 2.5mm of tread in the middle.
Registration on hold.

Rough, but can be ridden on the road or might be a suitable project for someone.
Shame to see it go, but we've got too many bikes in the garage as it is.

Duncan
0210416839
098206549

awa355
10th December 2012, 12:37
What size is he front tyre? What is the make of the rear tyre?

Also, what is the state of the rego? Thanks.

Magua
10th December 2012, 18:26
What size is he front tyre? What is the make of the rear tyre?

Also, what is the state of the rego? Thanks.

I'll update the main post.

90/90 18 on the front.
Bridgestone Bt45 on the rear. Maybe 2 - 2.5mm of tread. That's an estimate.

Rego on hold.

awa355
11th December 2012, 01:10
You describe it as a bit rough, It looks quite tidy in the photos. Are there any upcoming issues with it that you know of? Thanks

Magua
11th December 2012, 17:43
You describe it as a bit rough, It looks quite tidy in the photos. Are there any upcoming issues with it that you know of? Thanks

Knick on the seat and a small rusty dent on the tank (you can see these in the photos).

I've had the bike jump out of first gear a few times. It uses some oil so perhaps it could do with some new rings or valve stem seals?

Magua
19th December 2012, 21:23
Bump..............

Magua
15th January 2013, 21:38
Price reduced.

Xsannz
16th January 2013, 13:26
I have a complete one minus a cylinder head for spares if anybody who buys this wants to spruce it up.

If that helps any fence sitters buy this guys bike.