Urgent! SV650 triple clamps & tree

[cheesemethod]

Hi, urgently needed is a set of triple clamps for a 99 Suzuki SV650. Or just the top bit if you have just that. I'm not really fussy about where you might be, I'm willing to pickup almost anywhere in the North Island, or will pay for a good courier. I need these before next weekend, or I'm not racing. Please call O21 212 6O42 or PM me here.
279289

[Laava]

Oh, shame! The thread title on home page said SV650 triple and I bought popcorn and everything!

[98tls]

A bloke in the states made me a fancy top triple for my TLS years back thats still in the shed somewhere,long shot but possibly the top triple made for a 98TLS will fit a 99 SV650.Cant remember the details but a bloke on the TL site years ago fittedd TL forks to his daughters SV,if you can find out if it will fit i can send it up as long as you send it back,ive since fitted a GSXR front end to the TL but didnt use the top triple but intend to.

[98tls]

Pic of said top triple.

[cheesemethod]

That might work, if I can't track one down in time I'll get back to you. Where abouts are you?

[98tls]

That might work, if I can't track one down in time I'll get back to you. Where abouts are you?

Ive just emailed a mate in England whos well clever with such questions,hes logged on at the TL site so should reply with a yay/ney,am down south but nothing a decent courier company cant overcome if need be,all i ask is you get it back to me.

[quallman1234]

Pic of said top triple.

You could measure it instead...

Measure the fork size... 45mm or something...
Measure the fork center to center.
Measure the middle clamp size.
Measure the thickness in the middle.

Compare to SV650

[Deano]

Have you tried wayne@bikebusters.co.nz ?

[cheesemethod]

Have you tried wayne@bikebusters.co.nz ?
Yeah, I asked him on TM last night, no luck.

[98tls]

Hang on lads,hasnt the SV got right way up forks?

[Laava]

Yep, right way up forks. Ooh, bugger!

[hayd3n]

why not get one cnc'ed local???,
one with a bit more meat in the clamping area?
actually get 2 , one for a spare

[GSVR]

why not get one cnc'ed local???,
one with a bit more meat in the clamping area?
actually get 2 , one for a spare

Could be because:

1/ You aren't allowed to run them in the raceclass for this bike

2/ He needs them by next weekend not next month/year

3/ Do you have any idea what a CNC tripleclamp would cost?

On the Triple clamp problem. You should be able to run an injected model top clamp if the middle hole gets sleeved as the top nut is marginally bigger. Hole centers and offset appear to be the same. I'm running injected front end in 1999 triples

[FROSTY]

Cheesmethod.--There is apsolutely NO promises here but try Toby at auckland motorcycle services.8351172 or 0274456568.
He MIGHT be able to help you.
Alternatively could I ask what race class you are in? -If its PT I can't help but if F3 You could BORROW the front end from my K7 Gixxer 600 to get you through the weekend

[GSVR]

Cheesmethod.--There is apsolutely NO promises here but try Toby at auckland motorcycle services.8351172 or 0274456568.
He MIGHT be able to help you.
Alternatively could I ask what race class you are in? -If its PT I can't help but if F3 You could BORROW the front end from my K7 Gixxer 600 to get you through the weekend

Nice offer Frosty but have you ever fitted a GSXR front end into a carbed SV650?

They just swap into the injected models no problem but on the carbed model the top bearing is the issue. One work around is to get a really thin walled tapper roller bearing custom ground. Another is to press out the yokes and fit the SV one to the GSXR bottom triple after its built up or shimmed.

[98tls]

[QUOTE=GSVR;1130509126

Do you have any idea what a CNC tripleclamp would cost?
[/QUOTE]

$120 us fwiw.

[FROSTY]

Nice offer Frosty but have you ever fitted a GSXR front end into a carbed SV650?

They just swap into the injected models no problem but on the carbed model the top bearing is the issue. One work around is to get a really thin walled tapper roller bearing custom ground. Another is to press out the yokes and fit the SV one to the GSXR bottom triple after its built up or shimmed.
I "might" have an idea.-Given mine was one of the first sv's with a gixxer front end.
The guy has a week to sort it out so I figure=as means must

[cheesemethod]

Cheesmethod.--There is apsolutely NO promises here but try Toby at auckland motorcycle services.8351172 or 0274456568.
He MIGHT be able to help you.
Alternatively could I ask what race class you are in? -If its PT I can't help but if F3 You could BORROW the front end from my K7 Gixxer 600 to get you through the weekend

Thanks, I'll give Toby a try tomorrow. I'm in clubmans at the moment so the GSXR front end would be legal, but probably going overboard at the moment. Cheers for the offer tho.

[cheesemethod]

$120 us fwiw.

What's a bet that any of the wreckers will want twice that for the stock part.

[GSVR]

$120 us fwiw.

Maybe $120 US or $30 China but in NZ you probably wouldnt get much change from $100 just to buy the alloy to make it then it would start to get expensive.



I "might" have an idea.-Given mine was one of the first sv's with a gixxer front end.
The guy has a week to sort it out so I figure=as means must

Thats why I asked!

[GSVR]

What's a bet that any of the wreckers will want twice that for the stock part.

I sold one on trademe last month for $70.
http://www.trademe.co.nz/Browse/Listing.aspx?id=558527908

And the guy said he only wanted the bottom bit.

Got a whole bike for $2000

[crazy man]

Nice offer Frosty but have you ever fitted a GSXR front end into a carbed SV650?

They just swap into the injected models no problem but on the carbed model the top bearing is the issue. One work around is to get a really thin walled tapper roller bearing custom ground. Another is to press out the yokes and fit the SV one to the GSXR bottom triple after its built up or shimmed.you would have one lying around old man

[hayd3n]

$120 us fwiw.

cheep:first:

[orangeback]

http://www.gdlcycles.com/asp1/modetails.asp?ItemID=336-22436&qsmake=SV%20650
they are pretty quick at getting stuff out , , you might get it for he weekend if you order it today / there sun

[GSVR]

you would have one lying around old man

You could weld the broken one up for the guy or better still CNC him a new one. Only take and hour tops right?

Only have the injected one left now.

[crazy man]

You could weld the broken one up for the guy or better still CNC him a new one. Only take and hour tops right?

Only have the injected one left now.take me 5 mins to make a sleve for your fuel injected one ! bobs your mate

[cheesemethod]

Thanks everyone, I managed to track down one.