Keihin 41mm FCR race carbs, flat slide cr carbs for sale

[Fast Eddie]

Hi All,

Would like to pass on these 41mm flat slides to someone who can use them. I had purchased them hoping they would fit onto my yzf1000 motor but they do not, sadly.

Originally bought new and fitted to a fuel injected r1 motor a year or two ago, and then I bought them a few weeks ago but cannot used them (yet)

Price is firm. $1250.00. could deliver in Dunedin and ChCh and anywhere inbetween but you would have to wait until I do my next mission up to chch.. but it is an option.

Listed on trademe as well but price is slightly higher on there.

Any questions just ask, not sure what year r1 the carbs were fitted to, but I think around the 03/04 mark.. if that helps you figure out whether the carbs will fit your bike or not.

From what I gather they can be modified to fit anything but the details are not clear and I am not keen to try it myself.

022 029 6598

[Drew]

What about them is wrong? It's not a huge job to space them differently, it's just fiddly.

[Fast Eddie]

What about them is wrong? It's not a huge job to space them differently, it's just fiddly.

bowl round.. haha..

the main thing is the whole bank is too narrow for my yzf/fzr units in the chair.. the outside 2 carbs need to come out a bit.. the 2 middle are close but probably also shift outward a little bit..

R1 injected motor must have its cylinders or something closer together? or whole unit is narrowerer than than fzr or yzf thunderace units.

edit: failed at trying to find info on spacing them online.. if anyone has a good link to detailed info then feel free to link it up please.

[Fast Eddie]

can a mod change the ad price to 1250.. dunno what happened there.

[ducatilover]

It's not a hard, or expensive job to re-space them.
Look it up with people running 4AGE Toyotas on cars and Ford ZETEC, Pinto, BD series etc (common in the Ewe Kay)

Look, first google result I got http://www.xrtwo.com/forum/viewtopic.php?t=88057
:niceone:

[Grumph]

What about them is wrong? It's not a huge job to space them differently, it's just fiddly.

Don't try and talk him out of selling them...for South Island circuits and that motor they're too big anyway.

The money will be better spent elsewhere.

[Drew]

bowl round.. haha..

the main thing is the whole bank is too narrow for my yzf/fzr units in the chair.. the outside 2 carbs need to come out a bit.. the 2 middle are close but probably also shift outward a little bit..

R1 injected motor must have its cylinders or something closer together? or whole unit is narrowerer than than fzr or yzf thunderace units.

edit: failed at trying to find info on spacing them online.. if anyone has a good link to detailed info then feel free to link it up please.

Send them up, along with a set of your spare standard carbs retard. I'll sort it.

[Drew]

Don't try and talk him out of selling them...for South Island circuits and that motor they're too big anyway.

The money will be better spent elsewhere.

I have it from one I trust, that your shit is in one sock when it comes to the motory engine thingies. But too big? Not if you get hold of one of his heads and 'enhance' it.

I don't think he's ever gonna find another set for what he paid for those, so it's a flase economy to sell them unless he wants to repower the thing completely...Which would be a flase economy given the number of spares he has for what he's got.

[AndyR1]

...
Originally bought new and fitted to a fuel injected r1 motor a year or two ago, and then I bought them a few weeks ago but cannot used them (yet)
...
Any questions just ask, not sure what year r1 the carbs were fitted to, but I think around the 03/04 mark.. if that helps you figure out whether the carbs will fit your bike or not.
...


Hi there,

just worried why fuel injected bikes having Keihin carbs as well :no:

Only the 1998-2001 R1 is carbed and having Mikuni carbs as stock or you upgrade them to Keihins FCRs...From 2002 you have fuel injection right :rolleyes:

Do you have a link for your trademe offer because there are no Keihins for sale :msn-wink:

Or can you post me some pictures of the actual state of the Keihins per PM please.

I have a carburetted R1 and would be keen to get a nice set :banana:

Cheers
Andy

[Drew]

Hi there,

just worried why fuel injected bikes having Keihin carbs as well :no:

Only the 1998-2001 R1 is carbed and having Mikuni carbs as stock or you upgrade them to Keihins FCRs...From 2002 you have fuel injection right :rolleyes:

Do you have a link for your trademe offer because there are no Keihins for sale :msn-wink:

Or can you post me some pictures of the actual state of the Keihins per PM please.

I have a carburetted R1 and would be keen to get a nice set :banana:

Cheers
Andy

A guy without a clue, took fuel injection off an R1 motor. Put these on it, and put it in a sidecar...with limited (at best) skill.

Why would you go on trademe? He has them listed cheaper here.

[Kickaha]

Hi there,
just worried why fuel injected bikes having Keihin carbs as well :no:


Because according to Speedways guys carbs are much better :tugger:

[AndyR1]

I c..now it makes more sence. Not keen going over trademe just asking for some pictures.
Already saw Keihins from a speedway car on tradeMe - not so pretty at all for 1800 :weird:

Just need a set of "good" ones :niceone:

[AndyR1]

Because according to Speedways guys carbs are much better :tugger:

Yes 1000% agree - therefore I have still my RN01 :first:

[Fast Eddie]

Hi there,

just worried why fuel injected bikes having Keihin carbs as well :no:

Only the 1998-2001 R1 is carbed and having Mikuni carbs as stock or you upgrade them to Keihins FCRs...From 2002 you have fuel injection right :rolleyes:

Well don't worry about it too much..


Do you have a link for your trademe offer because there are no Keihins for sale :msn-wink:
what time did you check? auction closed 9.46pm. will relist.




Or can you post me some pictures of the actual state of the Keihins per PM please.
have relisted auction, you will find photos on there.. look at those ones as they cost me 20cents to put up.. get me my moneys worth.


I have a carburetted R1 and would be keen to get a nice set :banana:
keen enough to shell out over a grand for what I'm assuming is a road bike..


Cheers
Andy

no, thank you..

yea

[Fast Eddie]

Don't try and talk him out of selling them...for South Island circuits and that motor they're too big anyway.
Yea, when Beresford and Steur had it I think it had 37 or 38mm on it.. the info is somewhere in the folders I have.. Would be curious to try them out though if I can..



Look, first google result I got http://www.xrtwo.com/forum/viewtopic.php?t=88057
:niceone:
Yea you googled the right thing I guess, I was googling 'how to respace keihin carbs' and fuck all was coming up but forums with crap advice.
It does look doable now actually.


Send them up, along with a set of your spare standard carbs retard. I'll sort it.
yea had a read up and a think.. just pinch all the stuff off the stock carbs and put em on the flat slides? might have to muck around a wee bit..I can probably make something work..

[Kickaha]

Just need a set of "good" ones :niceone:
Be pretty hard to get a set better than these without buying brand new, doubt the sidecar did more than 20-30 laps with these on it before the owner decided not to race anymore

[Fast Eddie]

Be pretty hard to get a set better than these without buying brand new, doubt the sidecar did more than 20-30 laps with these on it before the owner decided not to race anymore

Bingo..

still looking into how to modify them to fit my motor.. see how we go.

[Fast Eddie]

Would like to pass on these 41mm flat slides to someone who can use them. I had purchased them hoping they would fit onto my yzf1000 motor but they do not, sadly.

Originally bought new and fitted to a fuel injected r1 motor a year or two ago, and then I bought them a few weeks ago but cannot used them (yet)

Price is firm. $1250.00. could deliver in Dunedin and ChCh and anywhere inbetween but you would have to wait until I do my next mission up to chch.. but it is an option.

[Fast Eddie]

41mm flat slides $1250.00

gwaarn.

[ducatilover]

$40 and a hug?

[sugilite]

Here is a link showing photos on how to space them, not a massive job.
http://www.bannons.co.uk/LifeShots.php?view=thumbnailList&category=5

[Fast Eddie]

Here is a link showing photos on how to space them, not a massive job.
http://www.bannons.co.uk/LifeShots.php?view=thumbnailList&category=5

Cheers dude. Could be done for sure.

May give it a go but still for sale as is at this stage. Or swap for smaller 39mm flat slides.

[Fast Eddie]

buy me, or swap for 3 new AVON slicks for sidecar.. or smaller carbs..

[Drew]

buy me, or swap for 3 new AVON slicks for sidecar.. or smaller carbs..

Just sleeve the things down, space them, and chuck them in already fuck ya!

[imdying]

Tasty... do like!

[Fast Eddie]

Tasty... do like!

hehe.. too many and too big for the rgv

[Fast Eddie]

bump bump..

does no one like horsepower on this website or what? ffs

[Drew]

bump bump..

does no one like horsepower on this website or what? ffsYou're stuck with them.

Fuck man, chuck them on the blade for Christ sake!

[ducatilover]

Be a man, do the right thing.

[Fast Eddie]

You're stuck with them.

Fuck man, chuck them on the blade for Christ sake!
haha, put em on ebay first.. maybe someone overseas needs some.
thought about seeing if they fit on the blade. too lazy at the mo got other stuff to do in my free time


Be a man, do the right thing.
rob someone of 1200 bucks and leave the carbs in their wallet in return?

[Drew]

Maybe I should take the injection off our chair, and fit these?

[Kickaha]

Maybe I should take the injection off our chair, and fit these?

I didn't realise you were from a speedway background

[Fast Eddie]

I didn't realise you were from a speedway background

haha

10cha

[Fast Eddie]

If you are reading this. Buy the carbs.

listed on ebay, and trademe.

like selling ice to an eskimo....

[Fast Eddie]

Bump Bump.

[Drew]

Bit of thinking about this, they'll come mighty close to fitting straight on the blade bro. Camchain off to the side, same as the R1 like.


Just saying.

[Fast Eddie]

Bit of thinking about this, they'll come mighty close to fitting straight on the blade bro. Camchain off to the side, same as the R1 like.


Just saying.

haha alright you have me interested.. I'll have a look if I get the chance this week.. no lights in the bike house and it gets dark by the time I'm home from work, racin sat - maybe sun..

[Fast Eddie]

Bump Bump.

Carbs.. stick em on your motor - go faster.

[Drew]

Bump Bump.

Carbs.. stick em on your motor - go faster.

Carbs..Stick 'em on your blade - go faster.

[Fast Eddie]

Carbs..Stick 'em on your blade - go faster.

buy the carbs or follow your avatars instructions

[Fast Eddie]

bump bump bump

[Fast Eddie]

bump bump :bash:

[Kornholio]

..........

287258

[Fast Eddie]

Tumbleweed prob sell faster.

Make an offer.. no one wants a set of carbs? if no one wants these things then where are all the 39mm ones for FZR's at.. I'll buy em up