Nat loopback - Draytek?

[scracha]

Kinda out my comfort zone so here goes:-

Anyone know a reliable ADSL modem, that supports NAT loopback? For some stupid reason Netcomm have dropped this feature from their range. TP-link does it but they fall over after a few weeks...probably filling up IP tables or something. Have a couple of new old stock WRT54GL but dunno how reliable they are.

Anyone using Draytek modems? All it has to do is support some port forwarding to 3 servers and NAT loopback to one internal webserver.

Otherwise should I be looking at this?
http://www.trademe.co.nz/computers/networking-modems/routers-firewalls/auction-593522644.htm

(Before anyone suggests it, changing internal DNS server will involve far too much work due to current @#$cked up setup)

[Gremlin]

According to this, NAT Loopback is supported: http://support.draytek.net.au/index.php?/Knowledgebase/Article/View/299/4/what-is-nat-loopback--is-it-supported-in-vigor-routers

Got several in service (VDSL and ADSL), they've become our default for good reliable modems. If you tell me which model you're interested in, I might have one I can double check for you.

[scracha]

According to this, NAT Loopback is supported: http://support.draytek.net.au/index.php?/Knowledgebase/Article/View/299/4/what-is-nat-loopback--is-it-supported-in-vigor-routers

Got several in service (VDSL and ADSL), they've become our default for good reliable modems. If you tell me which model you're interested in, I might have one I can double check for you.

Used a lot of TP-Link TD-W8960's (use on in my office) but my default for "solid" has been the relatively cheap Netcom NB604N (early days but not 1 in past 10 months since I started using them has so much as needed a restart) but they've not got the NAT loopback.

Anyways....Looking at Vigor 2710ne butDV120 might do the job as I can just replace the 5 port switch next to the modem with a wireless one. However, if a "one box" vigor can do the job then I'll be a happy bunny.

VDSL....I bloody wish. Local cabinet aint even got ADSL2.

Bought that Cisco box on trademe as a plan B. Seemed stupidly cheap to miss and I'll use it somewhere else if the Draytek doesn't work out.

[Gremlin]

Yep, used Netcomm and Dynalink before that, the NB604N, just the odd one, a lot of NB6 (and iterations) but the NB14 was crap.

Pretty sure we've got both of the Vigors, so I'll have a look tomorrow.

[Gremlin]

Anyways....Looking at Vigor 2710ne butDV120 might do the job as I can just replace the 5 port switch next to the modem with a wireless one. However, if a "one box" vigor can do the job then I'll be a happy bunny.
As luck would have it, a spare 2710ne was sitting in the cupboard, so yes, it supports NAT Loopback (and so does the 120 according to this: http://opensimulator.org/wiki/NAT_Loopback_Routers). Not too hard to test that either if you want, as we use a 120 for testing internally. As you probably know, the 2710ne has 4 LAN ports, wireless and WPS.

When you start getting nice internet, you can look at the VN or VDN Drayteks :msn-wink:

Check your PMs.