FZR250 carb inlet rubbers

[Shak]

Hi guys, I have a fzr250 86 and Im looking to replace the Carb inlet rubbers, Anyone have them or guide me to a place to find them please. New or Good quality used

Mainly need numbers 1 and 3. red baron has them but for $102 each which is quite steep lol..
Thanks

[hayd3n]

Hi guys, I have a fzr250 86 and Im looking to replace the Carb inlet rubbers, Anyone have them or guide me to a place to find them please. New or Good quality used

Mainly need numbers 1 and 3. red baron has them but for $102 each which is quite steep lol..
Thanks

another option would be to find some pipes the same od or similar :)

[The Reibz]

I got some old ones from a 3ln for the airbox to carb seals. You can have them for a box

[Shak]

I got some old ones from a 3ln for the airbox to carb seals. You can have them for a box

That would be a huge help! Thanks! but just to confirm this is the sample i was given for the part

just to make sure its the same?

[The Reibz]

ah thats the lower intake boots. Dont have any of those. If worst comes to worst you could give them a coat of RTV to help seal em up.

[hayd3n]

im sure some samco radiator hose or similar would work well :)

[Shak]

Thanks il keep looking, The samco hose will work? these parts have an internal casing inside them

[tobbera]

If yours are leaking, tape them up with a good sealing tape or coat them with elastic glue.

[hayd3n]

Thanks il keep looking, The samco hose will work? these parts have an internal casing inside them

errr um . na
was hoping they were just straight bits of pipe :(

[Shak]

glues not working, had it done by a plastic welder but no good, starts bogging at 8000revs.. dont think il hit 100kms with this atm, not in a hurry anyway lol..

anyone able to help out with a source for these?

for 2kr